Qi Zhang^1,2,4,5, Zhixin Chen³, Yang Wu^4,*, Guoqi Xiang², Guang Wen¹, Xuegang Zhang², Yongchun Xie², Guangchun Yang²

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 593-619, 2024, DOI:10.32604/cmes.2023.046319

Abstract Although there is currently no unified standard theoretical formula for calculating the contact stress of cylindrical gears with a circular arc tooth trace (referred to as CATT gear), a mathematical model for determining the contact stress of CATT gear is essential for studying how parameters affect its contact stress and building the contact stress limit state equation for contact stress reliability analysis. In this study, a mathematical relationship between design parameters and contact stress is formulated using the Kriging Metamodel. To enhance the model’s accuracy, we propose a new hybrid algorithm that merges the genetic algorithm with the Quantum Particle… More >

Jingying Lu¹, Datao Xu¹, Wenjing Quan^1,2, Julien S. Baker³, Yaodong Gu^1,*

Molecular & Cellular Biomechanics, Vol.19, No.2, pp. 61-75, 2022, DOI:10.32604/mcb.2022.019978

Abstract Objectives: Although overuse running injury risks for the ankle and knee are high, the effect of different shoe designs on Achilles tendon force (ATF) and Patellofemoral joint contact force (PTF) loading rates are unclear. Therefore, the primary objective of this study was to compare the ATF at the ankle and the PTF and Patellofemoral joint stress force (PP) at the knee using different running shoe designs (forefoot shoes vs. normal shoes). Methods: Fourteen healthy recreational male runners were recruited to run over a force plate under two shoe conditions (forefoot shoes vs. normal shoes). Sagittal plane ankle and knee kinematics… More >

F. R. M. Romlay¹

Structural Durability & Health Monitoring, Vol.4, No.1, pp. 19-28, 2008, DOI:10.3970/sdhm.2008.004.019

Abstract This paper presents a surface contact static stress of a spur gear system combined with dynamic characteristic using transient Finite Element Method (FEM). Traditionally, the static stress analysis is done separately with dynamic properties due to limitation of complex equation and avoiding of error occurred. However, in this paper, static stress information is combined with the dynamic mechanism due to the time consuming during the design and analysis stage. A transient FEM analysis is carried out to formulate and solve large systems of algebraic equations in order to obtain a relationship between the contact parameter and the kinematics function. The… More >

Ke JI, nlong Chen, Lina Zhang, Xinhua Ji

The International Conference on Computational & Experimental Engineering and Sciences, Vol.17, No.2, pp. 35-36, 2011, DOI:10.3970/icces.2011.017.035

Abstract The Stress distribution of contact area in engineering structure is complex. Automatic whole-field measurement of photo-elasticity is a feasibility method to solve the contact problem. However, the problem of isoclinic and isochromatic interaction is important in phase-shifting techniques in photo-elasticity. The technique named 8-step phase shifting technique is applied to solve the problem of isoclinic fringe pattern influenced by isochromatic fringe patterns in integer order and half-integer order. Isoclinic parameter in the range of [0,I/2] is given by the method.

Based on the eight-step phase shifting technique, some methods to determine the first principal stress direction of the model… More >

Molecular & Cellular Biomechanics, Vol.15, No.1, pp. 51-61, 2018, DOI:10.3970/mcb.2018.015.051

Abstract Tracheal stenosis is a common respiratory disease and is usually treated by stent implantation. However, the implanted stent often causes excessive hyperplasia of trachea granulation tissue, leading to the restenosis. Although surgical removal or chemical suppression can be used to alleviate the restenosis, the efficacy is limited. Thus, restenosis remains a thorny complication. We investigated this issue from the perspective of the “tress-growth”relationship. Firstly, the lower airway of 5 experimental dogs were CT-scanned to reconstruct the 3D numerical models; secondly, the implantations of the Nitinol alloy stents were numerically simulated; thirdly, 45 days after the stenting, the dogs were evaluated… More >