Xiaoyu Gu¹, Linbi Chen², Seithati Mapesela³, Zheng Wang^1,*, Aijin Zhou⁴

Journal of Renewable Materials, Vol.11, No.12, pp. 4197-4210, 2023, DOI:10.32604/jrm.2023.028768

Abstract The bamboo scrimber is an anisotropic material. The elastic constant values of the bamboo scrimber specimens measured by the dynamic and static methods are consistent, and the dynamic test method has the advantages of rapidity, simplicity, good repeatability, and high precision. Bamboo scrimber has strong potential as a building material, and its elastic constant is an important index to measure its mechanical properties. To quickly, simply, non-destructively, and accurately detect the elastic constant of the bamboo scrimber, they were dynamically tested by the free plate transient excitation method and cantilever plate torsional vibration method. The static four-point bending method was… More >

Dawei Liu, Zhiwei Jin, Xin Peng^*, Gang Liu, Yue Zhang

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.3, pp. 2691-2713, 2023, DOI:10.32604/cmes.2023.026048

Abstract The large dual-channel wide-bodied aircraft has a long range and a high cruise Mach number. Therefore, its aerodynamic design requires a high level of wind tunnel test refinement. Based on the requirements of aerodynamic design for the future wide-bodied aircraft and the characteristics of high-speed wind tunnel tests, the error theory is introduced to analyze the factors affecting the accuracy of the test data. This study carries out a series of research on the improvement of refined aerodynamic test technology in an FL-26 wind tunnel, including design and optimization of the support system of wide-bodied aircraft, model attitude angle measurement,… More >

Yuhao Zhou, Yuhang He, Zhaoyu Shen, Zheng Wang^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3459-3476, 2022, DOI:10.32604/jrm.2022.021251

Abstract In this article, dynamic method and static method of testing Poisson’s ratio of OSB (Oriented Strand Board) were proposed. Through modal and static numerical analyses, the position where the transverse stress is equal to zero was determined. The binary linear regression method was applied to express the gluing position of the strain gauge as a relational expression that depended on the length-width ratio and width-thickness ratio of the cantilever plate. Then the longitudinal and transverse Poisson’s ratios of OSB were measured by the given dynamic and static methods. In addition, the test results of OSB Poisson’s ratio were analyzed with… More >