Yu-Fu Ko^1,* , Jiann-Wen Woody Ju²

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.3, pp. 1305-1328, 2021, DOI:10.32604/cmes.2021.017589

Abstract Higher-order multiscale structures are proposed to predict the effective elastic properties of 3-phase particle reinforced composites by considering the probabilistic spherical particles spatial distribution, the particle interactions, and utilizing homogenization with ensemble volume average approach. The matrix material, spherical particles with radius a₁, and spherical particles with radius a₂, are denoted as the 0^th phase, the 1^st phase, and the 2^nd phase, respectively. Particularly, the two inhomogeneity phases are different particle sizes and the same elastic material properties. Improved higher-order (in ratio of spherical particle sizes to the distance between the centers of spherical particles) bounds on effective elastic properties… More >

Ellie Vineyard¹, Xin-Lin Gao^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.3, pp. 819-854, 2021, DOI:10.32604/cmes.2021.015688

Abstract 2-D and 3-D micro-architectured multiphase thermoelastic metamaterials are designed and analyzed using a parametric level set method for topology optimization and the finite element method. An asymptotic homogenization approach is employed to obtain the effective thermoelastic properties of the multiphase metamaterials. The -constraint multi-objective optimization method is adopted in the formulation. The coefficient of thermal expansion (CTE) and Poisson’s ratio (PR) are chosen as two objective functions, with the CTE optimized and the PR treated as a constraint. The optimization problems are solved by using the method of moving asymptotes. Effective isotropic and anisotropic CTEs and stiffness constants are obtained… More >

L. Gornet¹, S. Marguet², G. Marckmann³

CMC-Computers, Materials & Continua, Vol.4, No.2, pp. 63-74, 2006, DOI:10.3970/cmc.2006.004.063

Abstract The purpose of the present study is to determine the components of the effective elasticity tensor and the failure properties of Nomex^® honeycomb cores. In order to carry out this study, the NidaCore software, a program dedicated to Nomex®Cores predictions, has been developed using the Finite Element tool Cast3M-CEA. This software is based on periodic homogenization techniques and on the modelling of structural instability phenomena. The homogenization of the periodic microstructure is realized thanks to a strain energy approach. It assumes the mechanical equivalence between the microstructures of a RVE and a similar homogeneous macroscopic volume. The key point of… More >