Yeong-Ley Tsay^*, Jen-Chieh Cheng, Zhi-Hang Zhan

The International Conference on Computational & Experimental Engineering and Sciences, Vol.16, No.2, pp. 61-62, 2011, DOI:10.3970/icces.2011.016.061

Abstract A lot of researchers have dealt with the heat transfer enhancement of block heat sources mounted on the channel walls by using baffle. On the other hand, the heat generating components are allocated inside the channel or cabinet in many engineering applications. This study aims firstly to investigate the characteristics of conjugate heat transfer of conduction-forced convection in a rectangular channel containing a block heat source module. The module is comprised of a board and five block heat sources mounted discretely on the up surface of the board. Furthermore, efforts are carried out to explore the enhancement of cooling performance… More >

Eunsoo Choi^1,*, Yunkyu Ha¹, Duhyeon Kim¹, Hoan D. Nguyen¹, Tae Yeong Kim¹, Seong Jun Park¹, Yeon-seong Lee¹, Cheolki Min²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.1, pp. 13-13, 2019, DOI:10.32604/icces.2019.05356

Abstract This study was to provide a new aspect of application of shape memory alloys (SMAs) in civil engineering. The high-density polyethylene (HDPE) have been used for construction of pipelines for several years. The main problem of using HDPE for pipes is the joint of two adjacent pipes. In case of having a perfect joint, the HDPE pipeline can bare the internal pressure up to 90 MPa. However, in practice, it can rarely achieve to a perfect pipe joint due to the complicated process, so, it prone to fracture in low internal pressure. To overcome this, this study investigated the efficiency… More >

Dilson E. Rassier^*

Molecular & Cellular Biomechanics, Vol.6, No.4, pp. 229-242, 2009, DOI:10.3970/mcb.2009.006.229

Abstract When activated skeletal muscles are stretched at slow velocities, force increases in two phases: (i) a fast increase, and (ii) a slow increase. The transition between these phases is commonly associated with the mechanical detachment of cross-bridges from actin. This phenomenon is referred to asforce enhancement during stretch. After the stretch, force decreases and reaches steady-state at levels that are higher than the force produced at the corresponding length during purely isometric contractions. This phenomenon is referred to asresidual force enhancement.The mechanisms behind the increase in force during and after stretch are still a matter of debate, and have physiological… More >

Xingxing Xiao¹, Yang^1,*, Rui Li², Weiming Zhang³

CMC-Computers, Materials & Continua, Vol.60, No.1, pp. 101-115, 2019, DOI:10.32604/cmc.2019.05293

Abstract The medical industry develops rapidly as science and technology advance. People benefit from medical resource sharing, but suffer from privacy leaks at the same time. In order to protect patients’ privacy and improve quality of medical images, a novel reversible data hiding (RDH) scheme based on lesion extraction and with contrast enhancement is proposed. Furthermore, the proposed scheme can enhance the contrast of medial image's lesion area directly and embed high-capacity privacy data reversibly. Different from previous segmentation methods, this scheme first adopts distance regularized level set evolution (DRLSE) to extract lesion and targets at the lesion area accurately for… More >

B. Macomber¹, A. B. Probe¹, R. Woollands¹, J. Read¹, J. L. Junkins¹

CMES-Computer Modeling in Engineering & Sciences, Vol.111, No.1, pp. 29-64, 2016, DOI:10.3970/cmes.2016.111.029

Abstract Modified Chebyshev Picard Iteration is an iterative numerical method for solving linear or non-linear ordinary differential equations. In a serial computational environment the method has been shown to compete with, or outperform, current state of practice numerical integrators. This paper presents several improvements to the basic method, designed to further increase the computational efficiency of solving the equations of perturbed orbit propagation. More >

W. A. El-Askary, A. Abdel-Fattah

CMES-Computer Modeling in Engineering & Sciences, Vol.83, No.4, pp. 425-458, 2012, DOI:10.3970/cmes.2012.083.425

Abstract In the present paper, experimental and numerical studies of heat transfer and the frictional head loss of turbulent flow in a duct with a heated upper surface are performed. Four different arrangements are considered (case 1: without baffles, case 2: one perforated baffle on the upper wall and one solid baffle on the lower wall, case 3: one perforated baffle on the upper wall and one perforated baffle on the lower wall and case 4: two perforated baffles on the upper wall). A numerical code developed by the present authors is simultaneously presented including four different turbulence models; namely: the… More >

J. Badur¹, M. Karcz¹, M. Lemanski¹, L. Nastalek¹

CMES-Computer Modeling in Engineering & Sciences, Vol.73, No.3, pp. 299-310, 2011, DOI:10.3970/cmes.2011.073.299

Abstract In the paper we propose to remove the classical Navier slip condition and replace it with new generalized Navier-Stokes slip boundary conditions. These conditions are postulated to be ones following from the mass and momentum balance within a thin, shell-like moving boundary layer. Owing to this, the problem consistency between the internal and external friction in a viscous fluid is solved within the framework of a proper form of the layer balances, and a proper form of constitutive relations for appropriate friction forces. Finally, the common features of the Navier, Stokes, Maxwell and Reynolds concepts of a boundary slip layer… More >

M. Dandani^1,*, V. Lepiller², A. Ghezal³, P. Desevaux⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.1, pp. 23-37, 2018, DOI:10.3970/fdmp.2018.014.023

Abstract The present study deals with the numerical visualization of the mixing process in a 2D supersonic ejector. The mixing process is visualized using two CFD flow visualization methods. The first method consists in introducing discrete particles in the secondary flow and computing their trajectories. The second method consists in modeling the diffusion of a passive scalar introduced in one of the two flows. The mixing process is investigated in the case of a conventional 2D supersonic ejector and a second case of an ejector equipped with transverse micro jets. Flow visualizations obtained show the existence of a significant mixing enhancement… More >

Fatima-zohra Bensouici^{1, *}, Saadoun Boudebous²

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.3, pp. 189-212, 2017, DOI:10.3970/fdmp.2017.013.189

Abstract A numerical work has been performed to analyze the laminar mixed convection of nanofluids confined in a lid driven square enclosure with a central square and isotherm heat source. All the walls are cooled at constant temperature, and the top wall slides rightward at constant velocity. The simulations considered four types of nanofluids (Cu, Ag, Al₂O₃ and TiO₂)-Water. The governing equations were solved using finite volume approach by the SIMPLER algorithm. Comparisons with previously published work are performed and found to be in good agreement. The influence of pertinent parameters such as Richardson number, size of the heat source, solid… More >

Chaofan Duan¹, Jing Feng^1,*, Haotian Chang¹, Jianping Pan², Liming Duan¹

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 989-1002, 2019, DOI:10.32604/cmc.2019.06033

Abstract Coverage is an important issue for resources rational allocation, cognitive tasks completion in sensor networks. The mobility, communicability and learning ability of smart sensors have received much attention in the past decade. Based on the deep study of game theory, a mobile sensor non-cooperative game model is established for the sensor network deployment and a local information-based topology control (LITC) algorithm for coverage enhancement is proposed. We both consider revenue of the monitoring events and neighboring sensors to avoid nodes aggregation when formulating the utility function. We then prove that the non-cooperative game is an exact potential game in which… More >