O.M.Lavrenteva, Yu. Holenbergand A.Nir¹

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.1, pp. 41-74, 2010, DOI:10.3970/fdmp.2010.006.041

Abstract A variety of exact analytical solutions describing natural and thermocapillary convection in a horizontal double layer system consisting of Newtonian and Herschel-Bulkley fluids subjected to longitudinal temperature and concentration gradients is constructed. The lower boundary of the system is a solid wall with no-slip, while the upper ones if either a solid wall or a free surface. It was demonstrated that, depending on the governing parameters of the system, viscoplastic layer is entirely yielded or unyielded, or it can be yielded partially, exhibiting up to 5 flowing and quasi-solid layers. The dependence of the flow patterns (appearance and position of… More >

Chih-Ping Wu¹, Yun-Siang Syu

CMC-Computers, Materials & Continua, Vol.4, No.2, pp. 87-108, 2006, DOI:10.3970/cmc.2006.004.087

Abstract Based on the three-dimensional (3D) piezoelectricity, we presented asymptotic solutions for multilayered piezoelectric hollow cylinders using the method of perturbation. The material properties in the general formulation are firstly regarded to be heterogeneous through the thickness, and then specified as the layerwise step functions in the cases of multilayered cylinders. The transverse normal load and normal electric displacement are respectively applied on the lateral surfaces of the cylinders. The boundary conditions of cylinders are considered to be simply supported at the two edges. In the formulation the twenty-two basic equations of piezoelectricity are reduced to eight differential equations in terms… More >

Ran Wang¹, Xuegang Yuan^1,2, Hongwu Zhang¹, Jing Zhang³, Na Lv^2,*

CMC-Computers, Materials & Continua, Vol.55, No.2, pp. 345-357, 2018, DOI:10.3970/cmc.2018.00233

Abstract In this paper, a nonlinear wave equation with variable coefficients is studied, interestingly, this equation can be used to describe the travelling waves propagating along the circular rod composed of a general compressible hyperelastic material with variable cross-sections and variable material densities. With the aid of Lou’s direct method1, the nonlinear wave equation with variable coefficients is reduced and two sets of symmetry transformations and exact solutions of the nonlinear wave equation are obtained. The corresponding numerical examples of exact solutions are presented by using different coefficients. Particularly, while the variable coefficients are taken as some special constants, the nonlinear… More >

Sen-Yung Lee¹, Shueei-Muh Lin^2,3, Kai-Ping Chang¹

CMC-Computers, Materials & Continua, Vol.51, No.1, pp. 1-19, 2016, DOI:10.3970/cmc.2016.051.001

Abstract The two coupled governing differential equations for the out-of-plane vibrations of non-uniform beams with variable curvature are derived via the Hamilton's principle. These equations are expressed in terms of flexural and torsional displacements simultaneously. In this study, the analytical method is proposed. Firstly, two physical parameters are introduced to simplify the analysis. One derives the explicit relations between the flexural and the torsional displacements which can also be used to reduce the difficulty in experimental measurements. Based on the relation, the two governing characteristic differential equations with variable coefficients can be uncoupled into a sixth-order ordinary differential equation in terms… More >

M. C. Ray¹, L. Dong², S. N. Atluri³

CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 143-177, 2015, DOI:10.3970/cmc.2015.047.143

Abstract This paper is concerned with the development of new simple 4-noded locking-alleviated smart finite elements for modeling the smart composite beams. The exact solutions for the static responses of the overall smart composite beams are also derived for authenticating the new smart finite elements. The overall smart composite beam is composed of a laminated substrate conventional composite beam, and a piezoelectric layer attached at the top surface of the substrate beam. The piezoelectric layer acts as the actuator layer of the smart beam. Alternate finite element models of the beams, based on an “equivalent single layer high order shear deformation… More >

W. Zhao^1,2, X.G. Yuan^1,2,3, H.W. Zhang¹

CMC-Computers, Materials & Continua, Vol.43, No.2, pp. 75-86, 2014, DOI:10.3970/cmc.2014.043.075

Abstract The eversion problem for a class of compressible hyperelastic thinwalled cylindrical tubes is examined. The mathematical model is formulated as a second-order nonlinear ordinary differential equation based on the theory of nonlinear elasticity. The exact solution that describes the mechanism of the finite deformation of the everted cylindrical tube is obtained. Using numerical simulations, it is shown that the initial thickness of the tube plays a significant role in the eversion. More >

Chih-Ping Wu^1,2, Ruei-Yong Jiang¹, Sheng-Yao Tu¹

CMC-Computers, Materials & Continua, Vol.41, No.2, pp. 111-152, 2014, DOI:10.3970/cmc.2014.041.111

Abstract Exact three-dimensional stability and free vibration analyses of simply-supported, multilayered functionally graded material (FGM) circular hollow cylinders and laminated composite ones under axial compression are presented. The material properties of each FGM layer are assumed to obey a power-law distribution of the volume fractions of constituents through the thickness coordinate. The Pagano method, which is based on the principle of virtual displacement and is conventionally used for the analysis of laminated composite structures, is modified to be feasible for the study of multilayered FGM cylinders, in which Reissner's mixed variational theorem, the successive approximation and transfer matrix methods, and the… More >