Somasundaram Karthiyaini¹, Mohan Sasikumar^2,*, Abraham Jebamalar³, P. A. Prasob²

Journal of Polymer Materials, Vol.41, No.4, pp. 219-237, 2024, DOI:10.32604/jpm.2024.053829 - 16 December 2024

Abstract This manuscript presents the projectile impact behavior of hybrid jute/epoxy composite laminates using an instrumented air gun impact setup with the projectile moving in the vertical direction. An approach based on the stiffness change is used to predict the projectile impact response of hybrid jute epoxy-filled laminates impacted with a stainless-steel projectile. The experimental validation of the parameters like dynamic hardness (Hd) coefficient of restitution (COR), natural frequency, damping factor, and loss factor was used to analyze the impact behavior of jute/epoxy composites strengthened with fillers ZrO₂, ZnO, and TiO₂. The free vibration tests of the More >

Haitao Hei¹, Jian Wang¹, Yonggang Zheng¹, Hongfei Ye^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.30, No.1, pp. 1-1, 2024, DOI:10.32604/icces.2024.011298

Abstract Micro- and nano-scale collisions are widely involved in molecular movement, drug delivery, the actuation of micro-nano devices, etc. They often exhibit extraordinary behaviour relative to the common macroscopic collisions. A deep understanding on the scale reduction-induced novel collision phenomenon and the related mechanism is rather crucial. In this work, the comprehensive impact behaviour of metal projectiles on graphene is investigated on the basis of molecular dynamics simulations. It is found that besides the common penetration and rebound behaviours, the impacting metal projectile can also be captured by the ultrasoft two-dimensional materials, i.e., the adhesion behaviour.… More >

Amar Prakash¹, Srinivasan, S. M.², Rama Mohan Rao, A.³

CMC-Computers, Materials & Continua, Vol.42, No.1, pp. 75-102, 2014, DOI:10.3970/cmc.2014.042.075

Abstract Behaviour of layered steel fibre reinforced cementitious composite (SFRCC) panels is studied under high velocity impact of short projectiles. The panels consist of slurry infiltrated fibre concrete (SIFCON) layers in external faces and an intermediate (core) layer of latex modified concrete (LMC) and steel wire mesh embedded in cement sand slurry. In order to minimize acoustic impedance mismatch at the interfaces, judiciously selected materials are provided in the layers with appropriate lay-up sequences. For relative evaluation of high velocity impact performances of these panels', impact experiments are conducted in controlled environment. Two most commonly used… More >