Kelan Wang¹, Jianfei Chen^2,*

CMC-Computers, Materials & Continua, Vol.88, No.1, 2026, DOI:10.32604/cmc.2026.079644 - 08 May 2026

Abstract As 6G-enabled Industrial Internet of Things (IIoT) evolves, green and sustainable industrial monitoring increasingly relies on edge AI to deliver low-latency diagnosis under tight resource constraints. Industrial cyber–physical systems increasingly rely on heterogeneous sensing and communication infrastructures, where network-side attacks can propagate into physical processes and appear as coupled anomalies. Reliable diagnosis therefore requires joint learning from time-synchronized cyber and physical telemetry rather than modeling them as independent signals. This paper develops Cyber–Physical Symbiosis Network (CPSNet), a model designed for edge-AI deployment with a dual-stream architecture for fixed-window multiclass cross-domain anomaly diagnosis in IIoT. CPSNet… More >

Jaekyung Lee^1,2, Youngjun Kim², Byungsung Ko², Taewon Kim², Jaeheon Park², Jiwon Lee², Wonhee Kim^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.147, No.1, 2026, DOI:10.32604/cmes.2026.080624 - 27 April 2026

Abstract Automated reading of analog gauges in industrial environments is essential for predictive maintenance and safety monitoring. However, conventional computer vision approaches encounter two fundamental bottlenecks: polar unwrapping techniques induce severe nonlinear scaling distortions under oblique viewing angles and axis-aligned bounding boxes (AABBs) are geometrically inefficient for encapsulating high-aspect-ratio rotating needles. To overcome these limitations, this paper proposes a novel end-to-end framework that innovatively redefines gauge reading as a structural pose estimation task. We model each gauge as a topological five-keypoint skeleton (kstart,kmid,kcenter,kend,ktip), and localize these landmarks using a customized P2-YOLO-Pose architecture. By integrating a high-resolution… More >

Hongjiang Wang¹, Jian Yu², Tian Zhang³, Na Ren⁴, Nan Zhang², Zhenyu Liu^1,*

CMC-Computers, Materials & Continua, Vol.87, No.3, 2026, DOI:10.32604/cmc.2026.077997 - 09 April 2026

Abstract The rapid deployment of Industrial Internet of Things (IIoT) systems, such as large-scale photovoltaic (PV) power stations in modern power grids, has created a strong demand for edge-intelligent fault localization methods that can operate reliably under strict computational and memory constraints. In this work, we propose an edge-intelligent photovoltaic fault localization framework that integrates intelligent computation with classical sub-pixel optimization. The framework adopts a modular, edge-oriented design in which a radial basis function (RBF) network is first employed as a lightweight screening module to enable conditional execution, thereby reducing unnecessary computation for non-faulty samples. For… More >

Qingwen Yang¹, Zhi Li², Jiawei Tang¹, Yanyi Liu¹, Tiezheng Guo¹, Yingyou Wen^1,*

CMC-Computers, Materials & Continua, Vol.87, No.2, 2026, DOI:10.32604/cmc.2025.074384 - 12 March 2026

Abstract Deploying Large Language Model (LLM)-based agents in the Industrial Internet of Things (IIoT) presents significant challenges, including high latency from cloud-based APIs, data privacy concerns, and the infeasibility of deploying monolithic models on resource-constrained edge devices. While smaller models (SLMs) are suitable for edge deployment, they often lack the reasoning power for complex, multi-step tasks. To address these issues, this paper introduces LEAF, a Lightweight Edge Agent Framework designed for efficiently executing complex tasks at the edge. LEAF employs a novel architecture where multiple expert SLMs—specialized for planning, execution, and interaction—work in concert, decomposing complex… More >

Ka-Kyung Kim, Joon-Seok Kim, Dong-Hyuk Shin, Ieck-Chae Euom^*

CMES-Computer Modeling in Engineering & Sciences, Vol.146, No.2, 2026, DOI:10.32604/cmes.2026.077315 - 26 February 2026

Abstract As attack techniques evolve and data volumes increase, the integration of artificial intelligence-based security solutions into industrial control systems has become increasingly essential. Artificial intelligence holds significant potential to improve the operational efficiency and cybersecurity of these systems. However, its dependence on cyber-based infrastructures expands the attack surface and introduces the risk that adversarial manipulations of artificial intelligence models may cause physical harm. To address these concerns, this study presents a comprehensive review of artificial intelligence-driven threat detection methods and adversarial attacks targeting artificial intelligence within industrial control environments, examining both their benefits and associated… More > Graphic Abstract

Chia-Hui Liu^*

CMC-Computers, Materials & Continua, Vol.86, No.2, pp. 1-18, 2026, DOI:10.32604/cmc.2025.072887 - 09 December 2025

Abstract The Industrial Internet of Things (IIoT) has emerged as a cornerstone of Industry 4.0, enabling large-scale automation and data-driven decision-making across factories, supply chains, and critical infrastructures. However, the massive interconnection of resource-constrained devices also amplifies the risks of eavesdropping, data tampering, and device impersonation. While digital signatures are indispensable for ensuring authenticity and non-repudiation, conventional schemes such as RSA and ECC are vulnerable to quantum algorithms, jeopardizing long-term trust in IIoT deployments. This study proposes a lightweight, stateless, hash-based signature scheme that achieves post-quantum security while addressing the stringent efficiency demands of IIoT. The… More >

Wanwei Huang^1,*, Huicong Yu¹, Jiawei Ren², Kun Wang³, Yanbu Guo¹, Lifeng Jin⁴

CMC-Computers, Materials & Continua, Vol.86, No.1, pp. 1-24, 2026, DOI:10.32604/cmc.2025.068493 - 10 November 2025

Abstract Existing feature selection methods for intrusion detection systems in the Industrial Internet of Things often suffer from local optimality and high computational complexity. These challenges hinder traditional IDS from effectively extracting features while maintaining detection accuracy. This paper proposes an industrial Internet of Things intrusion detection feature selection algorithm based on an improved whale optimization algorithm (GSLDWOA). The aim is to address the problems that feature selection algorithms under high-dimensional data are prone to, such as local optimality, long detection time, and reduced accuracy. First, the initial population’s diversity is increased using the Gaussian Mutation More >

Shigen Shen^1,2, Xiaojun Ji^1,*, Yimeng Liu¹

CMC-Computers, Materials & Continua, Vol.85, No.2, pp. 3997-4021, 2025, DOI:10.32604/cmc.2025.069332 - 23 September 2025

Abstract The Industrial Internet of Things (IIoT) is increasingly vulnerable to sophisticated cyber threats, particularly zero-day attacks that exploit unknown vulnerabilities and evade traditional security measures. To address this critical challenge, this paper proposes a dynamic defense framework named Zero-day-aware Stackelberg Game-based Multi-Agent Distributed Deep Deterministic Policy Gradient (ZSG-MAD3PG). The framework integrates Stackelberg game modeling with the Multi-Agent Distributed Deep Deterministic Policy Gradient (MAD3PG) algorithm and incorporates defensive deception (DD) strategies to achieve adaptive and efficient protection. While conventional methods typically incur considerable resource overhead and exhibit higher latency due to static or rigid defensive mechanisms,… More >

Kuncham Sreenivasa Rao¹, Rajitha Kotoju², B. Ramana Reddy³, Taher Al-Shehari⁴, Nasser A. Alsadhan⁵, Subhav Singh^6,7,8, Shitharth Selvarajan^9,10,11,*

CMC-Computers, Materials & Continua, Vol.85, No.1, pp. 1899-1916, 2025, DOI:10.32604/cmc.2025.064728 - 29 August 2025

Abstract Protecting Supervisory Control and Data Acquisition-Industrial Internet of Things (SCADA-IIoT) systems against intruders has become essential since industrial control systems now oversee critical infrastructure, and cyber attackers more frequently target these systems. Due to their connection of physical assets with digital networks, SCADA-IIoT systems face substantial risks from multiple attack types, including Distributed Denial of Service (DDoS), spoofing, and more advanced intrusion methods. Previous research in this field faces challenges due to insufficient solutions, as current intrusion detection systems lack the necessary accuracy, scalability, and adaptability needed for IIoT environments. This paper introduces CyberFortis, a… More >

Shafi Ullah^1,*, Haidawati Muhammad Nasir², Kushsairy Kadir^3,*, Akbar Khan¹, Ahsanullah Memon⁴, Shanila Azhar¹, Ilyas Khan⁵, Muhammad Ashraf¹

CMC-Computers, Materials & Continua, Vol.82, No.2, pp. 3223-3249, 2025, DOI:10.32604/cmc.2024.054676 - 17 February 2025

Abstract Machine-to-machine (M2M) communication networks consist of resource-constrained autonomous devices, also known as autonomous Internet of things (IoTs) or machine-type communication devices (MTCDs) which act as a backbone for Industrial IoT, smart cities, and other autonomous systems. Due to the limited computing and memory capacity, these devices cannot maintain strong security if conventional security methods are applied such as heavy encryption. This article proposed a novel lightweight mutual authentication scheme including elliptic curve cryptography (ECC) driven end-to-end encryption through curve25519 such as (i): efficient end-to-end encrypted communication with pre-calculation strategy using curve25519; and (ii): elliptic curve More >