M. Inam¹, M. H. Dahri², M. R. Kamarudin³, A. Y. I. Ashyap³, M. H. Jamaluddin⁴, N. H. Sulaiman⁵, M. A. Khan⁶, Z. A. Shamsan^7,*, K. Almuhanna⁷, F. Alorifi⁷

CMC-Computers, Materials & Continua, Vol.72, No.2, pp. 2397-2410, 2022, DOI:10.32604/cmc.2022.025650

Abstract This work provides the design and analysis of a single layer, linearly polarized millimeter wave reflectarray antenna with mutual coupling optimization. Detailed analysis was carried out at 26 GHz design frequency using the simulations of the reflectarray unit cells as well as the periodic reflectarray antenna. The simulated results were verified by the scattering parameter and far-field measurements of the unit cell and periodic arrays, respectively. A close agreement between the simulated and measured results was observed in all the cases. Apart from the unit cells and reflectarray, the waveguide and horn antenna were also fabricated to be used in the… More >

Shahid Khan^1,2, Adil Bashir³, Haider Ali⁴, Abdul Rauf⁵, Mohamed Marey^6,*, Hala Mostafa⁷, Ikram Syed⁸

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 301-314, 2022, DOI:10.32604/cmc.2022.023397

Abstract This article presents a novel modified chuck wagon dinner bell shaped millimeter wave (mm-wave) antenna at 28 GHz. The proposed design has ultra-thin Rogers 5880 substrate with relative permittivity of 2.2. The design consists of T shaped resonating elements and two open ended side stubs. The desired 28 GHz frequency response is achieved by careful parametric modeling of the proposed structure. The maximum achieved single element gain at the desired resonance frequency is 3.45 dBi. The efficiency of the proposed design over the operating band is more than 88%. The impedance bandwidth achieved for −10 dB reference value is nearly… More >

Hijab Zahra¹, Wahaj Abbas Awan², Niamat Hussain^3,*, Syed Muzahir Abbas^1,4, Subhas Mukhopadhyay¹

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1935-1944, 2022, DOI:10.32604/cmc.2022.019495

Abstract This paper presents the design and characterization of a via free planar single turn helix for 28 GHz broadband applications. The proposed antenna is designed using ROGERS RO4003 material, having a simple structure and end-fire radiation pattern. The antenna comprises of a compact dimension of 1.36 λ₀ × 0.9 λ₀ with a thickness of 0.0189 λ₀ (where λ₀ is the free-space wavelength at the central frequency of 28 GHz). Parametric study has been carried out to investigate the impact of key design parameters and to achieve an optimum design. Results show a good agreement between the simulated and measured results.… More >