Yong Zhang^1,*, Jie Wang^2,3

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09368

Abstract Ferroelectric materials have been widely used in various electromechanical devices such as sensors, actuators, transducers and energy storage devices due to their distinguished electromechanical coupling properties. Ferroelectric materials usually bear large mechanical loads and high electric fields in order to give full play to their potential. The interaction between fracture and dielectric breakdown is able to occur since the filler inside a crack will change the dielectric behaviors around it and dielectric breakdown can change the local mechanical properties of dielectric materials because of its weakening of chemical bonds. Therefore, a comprehensive and in-depth understanding of the fracture and dielectric… More >

Leilei Chen^2,3, Haozhi Li^3,4, Lu Meng⁵, Pan Chen³, Pei Li^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-2, 2023, DOI:10.32604/icces.2023.010584

Abstract In this paper, a Direct FE² method is proposed to simulate the electromechanical coupling problem of inhomogeneous materials. The theoretical foundation for the proposed method, downscaling and upscaling principles, is the same as that of the FE² method. The two-level simulation in the Direct FE² method may be addressed in an integrative framework where macroscopic and microscopic degrees of freedom (DOFs) are related by multipoint constraints (MPCs) [1]. This critical characteristic permits simple implementation in commercial FE software, eliminating the necessity for recurrent data transfer between two scales [2-4]. The capabilities of Direct FE² are validated using four numerical examples,… More >

Zhengmao Yang^1,*, Junjie Yang², Yang Chen³, Fulei Jing⁴

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09229

Abstract Woven ceramic matrix composites (CMCs), exhibiting excellent thermomechanical properties at high temperatures, are promising as alternative materials to the conventional nickel-based superalloys in the hot section components of aero-engines. Therefore, understanding and predicting the lifetime of CMCs is critical. Fatigue prediction of woven CMCs currently involves long-term and costly testing. A feasible alternative is to use predictive modelling based on a deep understanding of the damage mechanisms. Therefore, this study develops a multiscale analysis modelling method for predicting the fatigue life of CMC materials at high temperature by investigating the thermomechanical fatigue damage evolution. To represent the global thermomechanical properties… More >

Fengchao Wu^1,*, Xuhai Li¹, Yi Sun¹, Yuanchao Gan¹, Huayun Geng¹, Yuying Yu¹, Jianbo Hu¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.09320

Abstract The dynamical response of materials to multiple shock waves is a critical issue in shock physics and engineering applications. In this work, hydrodynamic simulations are used to investigate the shock-induced spall failure and subsequent recompression characteristics of tin, under the implementation of a multiphase equation of state, multi-phase constitutive relations, and a damage model. As within experiments, double shock loadings in simulations are driven by layered impactors with different shock impedances. In general, our numerical calculations agree well with recent tin spall experiments and reproduce the free surface velocity characteristics. Interesting dynamic behaviors such as tin shock compression, dynamic tensile… More >

Zhiyang Yao¹, Shuling Wang¹, Yin Yu¹, Yile Hu^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09298

Abstract This study presents a method for modeling and analyzing the microstructure of short-fiber composites by using state-based PeriDynamic (PD). The micro-structure of short-fiber composites is obtained from MicroCT scanning which provides non-uniformly discretized meshes of short-fiber’s surface profile. In order to obtain the uniformly discretized PD model, a new layering algorithm is proposed to reconstruct the shortfiber microstructure. Furthermore, considering the anisotropy of short-fiber, a clustering algorithm based on machine learning is introduced to identify fibers and calculate their orientations. The PD interaction domain of a material point on the boundary is incomplete, it can be complemented by searching material… More >

Liang Wang^1,*, Haibo Su¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09107

Abstract This work proposes a novel multi-phase-field formulation to characterize the distinct damage mechanisms and quasi-brittle fracture behaviors in FRC. The phase field driving forces for each failure mechanisms are first defined based on an anisotropic energy split scheme. Then, the PF degradation functions pertinent to each failure mode are properly defined with corresponding material fracture quantities, which enables the derivation of embedded Hashin failure criteria for fiber- and matrix failures respectively. Furthermore, the material damaged stiffness is redefined within the anisotropic CDM framework, and a linear CZM is mathematically derived for each of the typical failure mechanisms. Finally, the model… More >

Yanyong Wang^1,2, Kunpeng Zhong¹, Xiaoguang Wang^1,2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09443

Abstract The storage of solar energy in the subsurface in terms of heat is considered as a promising way for energy storage and conversion in future, which has a great potential to solve the temporal and spatial mismatch between energy demand and supply. Thermal energy storage in deep saline aquifers is capable to convert intermittent solar energy into high temperature stable geothermal energy. In this study, we propose a new solar energy storage and conversion system in which solar energy is firstly converted into heat using parabolic trough and then thermal energy storage in deep saline aquifer is conducted by high… More >

Haiming Zhang^1,2,*, Shilin Zhao^1,2, Zhenshan Cui^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.08884

Abstract Particle-reinforced aluminum matrix composites (PRAMCs) have great potential for application in aerospace, automobile, defense, and electronics due to their high specific strength and stiffness and good resistance to wear and corrosion. Achieving a superior trade-off between the strength and ductility of PRAMCs necessitates an elaborative control of the microstructures, like the size and distribution of particles, as well as grain size, morphology, and texture of the matrix. The multiscale interaction between the particles and the matrix’s microstructure is insufficiently understood due to the lagging of high-resolved in-situ characterization. This work proposes a nonlocal physically based crystal plasticity (CP) modeling approach… More >

Shi Dai¹, Yanping Lian^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010175

Abstract In recent years, metal additive manufacturing (AM) has gained increasing attention from various industries. However, there are few studies on the thermal deformation behavior of additively manufactured metallic components, which is vital to pushing its applications’ boundary. In this work, we first experimentally investigate the mechanical behavior of AlSi10Mg produced by laser powder bed fusion under different temperatures and strain rates. A crystal plasticity finite element model is adopted to provide insights into the intrinsic deformation mechanisms. The model is validated by comparing it with the flow behaviors and dislocation evolutions observed in experiments at different conditions. The strain distributions… More >

Qilin Xiong^1,2,*, Wen An^1,2, Chuanzhi Liu^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.010044

Abstract Shear localization is an important failure mode, or even the dominant mode in metals at high-strain rates. However, it is a great challenge to accurately predict the occurrence and evolution of shear localization in metals at the high-strain rate deformation. Here, a dislocation-based crystal plasticity constitutive model with a crucial mechanism of shear instability, namely dynamic recrystallization, was developed. The evolution equations of dislocation density and grain size in the process of dynamic recrystallization were proposed and incorporated into the new constitutive model. The threshold of the stored energy in crystals was used as the criterion for the occurrence of… More >