Yuxin Wang¹, Youjiang Wang², Jieping Wang², Chao Zhang^1,*, Fanguang Meng³, Linhua Zhang¹, Yongxing Song^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.21, No.11, pp. 2761-2777, 2025, DOI:10.32604/fdmp.2025.072236 - 01 December 2025

Abstract High-pressure water jet technology has emerged as a highly effective method for removing industrial-scale deposits from pipelines, offering a clean, efficient, and environmentally sustainable alternative to conventional mechanical or chemical cleaning techniques. Among the many parameters influencing its performance, the geometry of the nozzle plays a decisive role in governing jet coherence, impact pressure distribution, and overall cleaning efficiency. In this study, a comprehensive numerical and experimental investigation is conducted to elucidate the influence of nozzle geometry on the behavior of high-pressure water jets. Using Computational Fluid Dynamics (CFD) simulations based on the Volume of… More >

Jianfeng Pan^*, Jinpeng Hua, Jiaqi Yao, Abiodun Oluwaleke Ojo

Energy Engineering, Vol.120, No.7, pp. 1541-1562, 2023, DOI:10.32604/ee.2023.027873 - 04 May 2023

Abstract The group-hole nozzle concept is proposed to meet the requirement of nozzle hole minimization and reduce the negative impact of poor spatial spray distributions. However, there are limited researches on the effects of intake conditions and nozzle geometry on spray characteristics of the group-hole nozzle. Therefore, in this study, an accurate spray model coupled with the internal cavitating flow was established and computational fluid dynamics (CFD) simulations were done to study the effects of intake conditions and nozzle geometry on spray characteristics of the group-hole nozzle. Experimental data obtained using high-speed digital camera on the… More >

Ali Safari Variani¹, Ali Dastamoz¹, Sajad Zare², Ahmad Nikpey¹, Saeid Ahmadi^1,*

Sound & Vibration, Vol.54, No.1, pp. 43-55, 2020, DOI:10.32604/sv.2020.08636 - 01 March 2020

Abstract This work investigated multiple jet nozzles with various geometrical shape, number of exits, and material on reducing noise radiated from jet flows. Nozzles are categorized in two groups with few and many exit numbers, each with various exit shapes, slot and circular, and geometry. Firstly, nozzles are designed and then fabricated by a 3D printer, Form Labs, Form2USA, with polymeric resin. Also, the nozzle with the most noise reduction made of stainless steel. Noise and air thrust were measured at three air pressure gauges, 3, 5, 7 BAR and directions from nozzle apex, 30°, 90°,… More >