Castro Nava S

Phyton-International Journal of Experimental Botany, Vol.82, pp. 249-254, 2013, DOI:10.32604/phyton.2013.82.249

Abstract Identification of plant tolerance to heat requires novel strategies for measuring plant responses to this stress. Leaf electrolyte leakage is an indirect method that can be utilized as selection criteria for heat tolerance in plants, but it has to be adapted to each species. The objectives of this study were to measure heat-induced leaf electrolyte leakage in corn and bean to determine heat tolerant genotypes, and also to establish the optimal developmental stage for use of electrolyte leakage as selection criteria. This study included two genotypes of corn (Zea mays L.), and other two of bean (Phaseolus… More >

A. Rtibi¹, M. Hasnaoui¹, A. Amahmid¹

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.2, pp. 183-207, 2013, DOI:10.3970/fdmp.2013.009.183

Abstract In this paper we present an analytical and numerical study of Soret convection in an inclined rectangular porous layer saturated with a binary fluid and subject to uniform heat fluxes. In the problem formulation, the Darcy model is considered and the results are presented for wide ranges of R_T (50 ≤ R_T ≤ 1000), θ(0°≤θ≤180°) and φ(-1 ≤ φ ≤ 1) for Le = 10, where R_T, θ, φ, and Le are the thermal Darcy-Rayleigh number, the cavity inclination, the separation parameter, and the Lewis number, respectively. An analytical solution, derived on the basis of the parallel flow approximation,… More >

Vijay Kumar Gupta

The International Conference on Computational & Experimental Engineering and Sciences, Vol.20, No.2, pp. 55-56, 2011, DOI:10.3970/icces.2011.020.055

Abstract Various applications of piezoelectric actuators have been explored over the years. One such application is use of piezoelectric actuators for shape control of structures. In this paper, steering of parabolic antenna by deforming the antenna surface using piezoelectric actuators has been explored. Optimization based on Genetic Algorithm is carried out to find out optimum location, length and applied electric field to the piezoelectric actuators to achieve desired steering of antenna. Constraints are included in the objective function using penalty approach. Shell finite element model is used to determine deformations induced by the actuators. As the More >

Chein-Shan Liu¹, Satya N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol.73, No.4, pp. 395-432, 2011, DOI:10.3970/cmes.2011.073.395

Abstract In this paper we solve a system of nonlinear algebraic equations (NAEs) of a vector-form: F(x) = 0. Based-on an invariant manifold defined in the space of (x,t) in terms of the residual-norm of the vector F(x), we derive a system of nonlinear ordinary differential equations (ODEs) with a fictitious time-like variable t as an independent variable: x^· = λ[αF + (1−α)B^TF], where λ and α are scalars and B_ij = ∂F_i/∂x_j. From this set of nonlinear ODEs, we derive a purely iterative algorithm for finding the solution vector x, without having to invert the Jacobian… More >

Şahin Emrah Amrahov¹, Iman N.Askerzade¹

CMES-Computer Modeling in Engineering & Sciences, Vol.70, No.1, pp. 1-10, 2010, DOI:10.3970/cmes.2010.070.001

Abstract In this paper we define multivariable fuzzy functions (MFF) and corresponding multivariable crisp functions (MCF). Then we give a definition for the maximum value of MFF, which in some cases coincides with the maximum value in Pareto sense. We introduce generalized maximizing and minimizing sets in order to determine the maximum values of MFF. By equating membership functions of a given fuzzy domain set and the corresponding maximizing set, we obtain a curve of equal possibilities. Then we use the method of Lagrange multipliers to solve the resulting nonlinear optimization problem when the membership functions More >

Veturia Chiroiu, Ligia Munteanu¹, Adrian Toader²

CMES-Computer Modeling in Engineering & Sciences, Vol.65, No.1, pp. 1-26, 2010, DOI:10.3970/cmes.2010.065.001

Abstract The best methods of the genetic algorithms (GA) are obtained in order to optimize the shape of a thin elastic rod subjected to spatial bending and torsion. The optimal cross-section is determined from the minimum volume condition, against the three modal bucklings. More >

Cheng-Hung Huang^1,2, Hsin-Hsien Wu¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.9, No.2, pp. 107-108, 2009, DOI:10.3970/icces.2009.009.107

Abstract The conjugate gradient method (CGM) is applied in an inverse fin design problem in estimating the optimum shapes for the non-Fourier spine and longitudinal fins based on the desired fin efficiency and fin volume at the specified time. One of the advantages in using CGM in the inverse design problem lies in that it can handle problems having a huge number of design parameters easily and converges very fast.
The validity of using CGM in solving the present inverse design problem is justified by performing the numerical experiments. Several test cases involving different design fin efficiency, More >

F.R. Biglari¹, A. Agahi¹, O. Nikfarjam², B. M. Dariani¹, K. Nikbin³

Structural Durability & Health Monitoring, Vol.4, No.1, pp. 47-52, 2008, DOI:10.3970/sdhm.2008.004.047

Abstract A modified sensitivity analysis has been applied to an elastic-plastic finite element analysis 3D blank design in sheet metal forming. In recent literature, the sensitivity method has successfully been applied to several arbitrary shapes. However, in the present paper the sensitivity coefficients are not considered constant during the analysis. The presented approach computes the new coefficients from the two last iterations. This method can produce an initial blank boundary shape that has any arbitrary flange shape. A cup with uniform flange has been studied in detail and results show a faster solution convergence than the More >

A. Alexenadrescu¹, A.S. Alex,rescu¹, A.C. Alexandrescu¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.8, No.2, pp. 47-58, 2008, DOI:10.3970/icces.2008.008.047

Abstract The paper follows the analyse of the connections between the constructive, working parameters, the annual energy consumptions and the energy quantity included in fitting out; it will formulate a methodology of establishment of the optimum values of the parameters of admeasurements of the pumping stations for the setting under pressure, of pipes networks, what ensure an optimum consumption of energy during of duty of the fitting out (the operational energy and the included energy in the networks, equipment and constructions), of the conditions after that it can be obtained. It will follow the generalization of More >

Daizhong Su¹, Wenjie Peng²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.6, No.4, pp. 221-228, 2008, DOI:10.3970/icces.2008.006.221

Abstract Finite element analysis (FEA) has proved to be a useful method to analyse the strength of worm gears; however, it is usually time consuming and difficult for parametric design, and, hence, it is difficult to apply FEA for design optimisation. To overcome this problem, artificial neural network and genetic algorithm are utilised in this research to optimise worm gear design based on FEA results. A new type of worm drive, an involute cylindrical worm matting with an involute helical gear, is taken as an vehicale to illustrate the approach developed. More >