Ngoc Thai Huynh¹, Tien V. T. Nguyen², Quoc Manh Nguyen^3,*

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5961-5983, 2022, DOI:10.32604/cmc.2022.029484

Abstract To achieve high work performance for compliant mechanisms of motion scope, continuous work condition, and high frequency, we propose a new hybrid algorithm that could be applied to multi-objective optimum design. In this investigation, we use the tools of finite element analysis (FEA) for a magnification mechanism to find out the effects of design variables on the magnification ratio of the mechanism and then select an optimal mechanism that could meet design requirements. A poly-algorithm including the Grey-Taguchi method, fuzzy logic system, and adaptive neuro-fuzzy inference system (ANFIS) algorithm, was utilized mainly in this study. The FEA outcomes indicated that… More >

A. Arunkumar^1,*, S. Ramabalan¹, D. Elayaraja²

Intelligent Automation & Soft Computing, Vol.35, No.1, pp. 1229-1244, 2023, DOI:10.32604/iasc.2023.027388

Abstract Environmental issues like pollution are major threats to human health. Many systems are developed to reduce pollution. In this paper, an optimal mobile robot design to reduce pollution in Green supply chain management system. Green supply chain management involves as similating environmentally and economically feasible solutions into the supply chain life-cycle. Smartness, advanced technologies, and advanced networks are becoming pillars of a sustainable supply chain management system. At the same time, there is much change happening in the logistics industry. They are moving towards a new logistics model. In the new model, robotic logistics has a vital role. The reasons… More >

Xiaoyong Wang^*

Journal of Renewable Materials, Vol.10, No.9, pp. 2431-2450, 2022, DOI:10.32604/jrm.2022.020829

Abstract Metakaolin is a highly reactive pozzolanic material that is widely utilized for enhancing the performance of concrete. This study offers a framework for the mixture design of sustainable metakaolin-modified concrete with low CO₂ emissions and low costs. Different design strengths after 28 days are first formulated, with values such as 30, 40, 50, and 60 MPa. A genetic algorithm is then used to determine the optimal mixtures. Minimized CO₂ and cost are set as the aims of the genetic algorithm. The strength of the concrete, its workability (slump), and carbonation service life with climate change are set as constraints of the… More >

Jiejiang Zhu^{1, *}, Bolun Zhou¹

CMC-Computers, Materials & Continua, Vol.62, No.1, pp. 365-383, 2020, DOI:10.32604/cmc.2020.06655

Abstract The eagle strategy algorithm is combined with particle swarm optimization in this paper. The new algorithm, denoted as the ES-PSO, is implemented by interfacing Etabs structural analysis codes. ES-PSO is used to optimize the RC ribbed floor system, including floor and underground garage roof. By considering the effects of reinforcement, the principle of virtual work is applied to calculate the deflections of components. Construction cost is taken as the objective function and the constraint conditions are required to satisfy. Accordingly, the optimal layout, the optimal sections of the beams and slabs and the corresponding reinforcements are obtained for different column… More >

Daizhong Su¹, Wenjie Peng²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.6, No.4, pp. 221-228, 2008, DOI:10.3970/icces.2008.006.221

Abstract Finite element analysis (FEA) has proved to be a useful method to analyse the strength of worm gears; however, it is usually time consuming and difficult for parametric design, and, hence, it is difficult to apply FEA for design optimisation. To overcome this problem, artificial neural network and genetic algorithm are utilised in this research to optimise worm gear design based on FEA results. A new type of worm drive, an involute cylindrical worm matting with an involute helical gear, is taken as an vehicale to illustrate the approach developed. More >

Veturia Chiroiu, Ligia Munteanu¹, Adrian Toader²

CMES-Computer Modeling in Engineering & Sciences, Vol.65, No.1, pp. 1-26, 2010, DOI:10.3970/cmes.2010.065.001

Abstract The best methods of the genetic algorithms (GA) are obtained in order to optimize the shape of a thin elastic rod subjected to spatial bending and torsion. The optimal cross-section is determined from the minimum volume condition, against the three modal bucklings. More >

R. Sedaghati, A. Suleman¹, S. Dost, B. Tabarrok²

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 259-272, 2001, DOI:10.3970/cmes.2001.002.259

Abstract A structural analysis and optimization method is developed to find the optimal topology of adaptive determinate truss structures under various impact loading conditions. The objective function is based on the maximization of the structural strength subject to geometric constraints. The dynamic structural analysis is based on the integrated finite element force method and the optimization procedure is based on the Sequential Quadratic Programming (SQP) method. The equilibrium matrix is generated automatically through the finite element analysis and the compatibility matrix is obtained directly using the displacement-deformation relations and the Single Value Decomposition (SVD) technique. By combining the equilibrium and the… More >

G. Frulla¹, P. Gili¹, M. Visone², V. D’Oriano^2,3, M. Lappa⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.11, No.3, pp. 257-277, 2015, DOI:10.3970/fdmp.2015.011.257

Abstract A practical engineering approach to the design of a 60 kW wind generator with improved performances is presented. The proposed approach relies on the use of a specific, "ad hoc'' developed software, OPTIWR (Optimization Software), expressly conceived to define an "optimum'' rotor configuration in the framework of the blade-element-momentum theory. Starting from an initial input geometric configuration (corresponding to an already existing 50 kW turbine) and for given values of the wind velocity V_wind and of the advance ratio X = V_wind/ΩR (where Ω is the blade rotational speed and R is the propeller radius), this software is used to… More >