Xiaoqin Wu, Songrong Qian^*, Ming Yang

CMC-Computers, Materials & Continua, Vol.77, No.3, pp. 3349-3366, 2023, DOI:10.32604/cmc.2023.043671

Abstract Safety helmets can reduce head injuries from object impacts and lower the probability of safety accidents, as well as being of great significance to construction safety. However, for a variety of reasons, construction workers nowadays may not strictly enforce the rules of wearing safety helmets. In order to strengthen the safety of construction site, the traditional practice is to manage it through methods such as regular inspections by safety officers, but the cost is high and the effect is poor. With the popularization and application of construction site video monitoring, manual video monitoring has been realized for management, but the… More >

NaeJoung Kwak¹, DongJu Kim^2,*

CMC-Computers, Materials & Continua, Vol.75, No.1, pp. 1671-1686, 2023, DOI:10.32604/cmc.2023.035762

Abstract This paper proposes a method for detecting a helmet for the safety of workers from risk factors and a mask worn indoors and verifying a worker’s identity while wearing a helmet and mask for security. The proposed method consists of a part for detecting the worker’s helmet and mask and a part for verifying the worker’s identity. An algorithm for helmet and mask detection is generated by transfer learning of Yolov5’s s-model and m-model. Both models are trained by changing the learning rate, batch size, and epoch. The model with the best performance is selected as the model for detecting… More >

Kisaezehra¹, Muhammad Umer Farooq^1,*, Muhammad Aslam Bhutto², Abdul Karim Kazi¹

Intelligent Automation & Soft Computing, Vol.36, No.1, pp. 911-927, 2023, DOI:10.32604/iasc.2023.031359

Abstract The construction industry has always remained the economic and social backbone of any country in the world where occupational health and safety (OHS) is of prime importance. Like in other developing countries, this industry pays very little, rather negligible attention to OHS practices in Pakistan, resulting in the occurrence of a wide variety of accidents, mishaps, and near-misses every year. One of the major causes of such mishaps is the non-wearing of safety helmets (hard hats) at construction sites where falling objects from a height are unavoidable. In most cases, this leads to serious brain injuries in people present at… More >

Yanman Li¹, Jun Zhang¹, Yang Hu¹, Yingnan Zhao^2,*, Yi Cao³

Computer Systems Science and Engineering, Vol.43, No.3, pp. 1219-1230, 2022, DOI:10.32604/csse.2022.028224

Abstract Safety helmet-wearing detection is an essential part of the intelligent monitoring system. To improve the speed and accuracy of detection, especially small targets and occluded objects, it presents a novel and efficient detector model. The underlying core algorithm of this model adopts the YOLOv5 (You Only Look Once version 5) network with the best comprehensive detection performance. It is improved by adding an attention mechanism, a CIoU (Complete Intersection Over Union) Loss function, and the Mish activation function. First, it applies the attention mechanism in the feature extraction. The network can learn the weight of each channel independently and enhance… More >

Wei Chen¹, Mi Liu^1,*, Xuhong Zhou², Jiandong Pan³, Haozhi Tan⁴

CMC-Computers, Materials & Continua, Vol.72, No.2, pp. 3159-3174, 2022, DOI:10.32604/cmc.2022.026664

Abstract In construction, it is important to check whether workers wear safety helmets in real time. We proposed using an unmanned aerial vehicle (UAV) to monitor construction workers in real time. As the small target of aerial photography poses challenges to safety-helmet-wearing detection, we proposed an improved YOLOv4 model to detect the helmet-wearing condition in aerial photography: (1) By increasing the dimension of the effective feature layer of the backbone network, the model's receptive field is reduced, and the utilization rate of fine-grained features is improved. (2) By introducing the cross stage partial (CSP) structure into path aggregation network (PANet), the… More >

Qingyang Zhou¹, Jiaohua Qin^1,*, Xuyu Xiang¹, Yun Tan¹, Neal N. Xiong²

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 159-174, 2021, DOI:10.32604/cmc.2021.017480

Abstract The existing safety helmet detection methods are mainly based on one-stage object detection algorithms with high detection speed to reach the real-time detection requirements, but they can’t accurately detect small objects and objects with obstructions. Therefore, we propose a helmet detection algorithm based on the attention mechanism (AT-YOLO). First of all, a channel attention module is added to the YOLOv3 backbone network, which can adaptively calibrate the channel features of the direction to improve the feature utilization, and a spatial attention module is added to the neck of the YOLOv3 network to capture the correlation between any positions in the… More >