Nikola Stosic^**, Ian K. Smith, Ahmed Kovacevic

Frontiers in Heat and Mass Transfer, Vol.3, No.2, pp. 1-7, 2012, DOI:10.5098/hmt.v3.2.3003

Abstract Due to fast rotation of screw compressor rotors, temperature is uniform in the rotor cross section and temperature field is a function of the axial coordinate only. Apart of that the rotors in one cross section the rotors are simultaneously heated by hot gas on one side while cooled at another side by cold gas. As a result of identification of the main modes of heat transfer both in the rotors and between the rotors and their surroundings and the relative significance of each, a novel procedure is suggested to cool the rotors by injection of minute quantities of a… More >

Haoyu Fu^1,2,3, Hua Liu^1,2, Xiaohu Hu^1,2, Lei Wang^1,2,3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2285-2309, 2023, DOI:10.32604/cmes.2023.027996

Abstract Well interference has become a common phenomenon with the increasing scale of horizontal well fracturing. Recent studies on well interference in horizontal wells do not properly reflect the physical model of the postfracturing well groups and the realistic fracturing process of infill wells. Establishing the correspondence between well interference causative factors and manifestations is of great significance for infill well deployment and secondary oil recovery. In this work, we develop a numerical model that considers low velocity non-Darcy seepage in shale reservoirs to study the inter-well interference phenomenon that occurs in the Santanghu field, and construct an explicit hydraulic fracture… More >

Rishi Dewan¹, Adarsh Kumar², Mohammad Khalid Imam Rahmani³, Surbhi Bhatia⁴, Md Ezaz Ahmed^3,*

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5761-5776, 2022, DOI:10.32604/cmc.2022.024762

Abstract Water injection has shown to be one of the most successful, efficient, and cost-effective reservoir management strategies. By re-injecting treated and filtered water into reservoirs, this approach can help maintain reservoir pressure, increase hydrocarbon output, and reduce the environmental effect. The goal of this project is to create a water injection model utilizing Eclipse reservoir simulation software to better understand water injection methods for reservoir pressure maintenance. A basic reservoir model is utilized in this investigation. For simulation designs, the reservoir length, breadth, and thickness may be changed to different levels. The water-oil contact was discovered at 7000 feet, and the… More >