Medta Boupan^1,2, Kanyapak Prompang¹, Achiraya Chompunuch¹, Piwat Boonma¹, Arthit Neramittagapong^1,2,3,4, Somnuk Theerakulpisut⁵, Sutasinee Neramittagapong^1,2,3,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.026397

Abstract Isosorbide is a multi-purpose chemical that can be produced from renewable resources. Specifically, it has been investigated as a replacement for toxic bisphenol A (BPA) in the production of polycarbonate (PC). In this study, the synthesis of isosorbide by sorbitol dehydration using a cerium-based catalyst derived from calcined cerium (IV) sulfate (300°C, 400°C, 450°C, 500°C, and 650°C) was investigated. The reaction occurred in a high-pressure reactor containing nitrogen gas. Advanced instrumental techniques were applied to analyze the characteristics of the calcined catalyst. The results showed that the calcined catalysts demonstrated different crystalline structures and sulfate species at different temperatures. However,… More >

Nurul Anis Athirah Ab Aziz^*, Chin Wei Lai^*, Boon Hoong Ong

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025899

Abstract Nowadays, corrosion is not only undesirable, but it also has a significant influence on the industrial sectors and technical innovations that have demand for metals. The global economic damage is expected to reach $2.5 trillion, equivalent to more than 3.4% of the world’s GDP in 2013. It is linked with significant financial harm, manufacturing pollution, and safety issues. An electrochemical process primarily induces metal corrosion at the metalelectrolyte interface region, caused by steel oxidation and the reduction of oxygen, protons, and water. Therefore, organic and epoxy coatings can be applied as protective coatings. Additionally, it can prevent metal corrosion in… More >

Rafal A. Hadi^1,*, Suhad M. Abd², Hadee Mohammed Najm³, Shaker Qaidi^4,5,*, Moutaz Mustafa A. Eldirderi⁶, Khaled Mohamed Khedher^7,8

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025558

Abstract Recent years have witnessed an increase in the quantity of waste glass (WG) across the globe. Replacing the fine aggregate with WG is one of the steps toward preserving the natural resources of the environment and creating low-cost concrete. The present study is concerned with replacing fine aggregates with glass powder (GP) at (0%, 15%, 30%, and 50%). It has studied the fresh and hardened properties (compressive strength, tensile strength, hardened density, and slump) for all the mentioned percent replacements. The findings have shown that all mixtures containing GP gave acceptable slump results within the design limits (2–5 cm) according… More >

Yatim Lailun Ni’mah^*, Nabila Eka Yuningsih, Suprapto Suprapto

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025431

Abstract The adsorption of Pb(II) on silica gel synthesized from chemical glass bottle waste has been studied. The effect of independent variables (adsorbent dose, initial concentration of Pb(II), contact time, and pH) on the Pb(II) removal from water was evaluated and optimized using the Response Surface Methodology (RSM). Under optimized conditions (adsorbent dose: 20 mg; contact time: 30 min; initial Pb(II) concentration: 120 mg. L⁻¹ ; and pH: 8), the removal of Pb(II) was 99.77%. The adsorption equilibrium data obtained from the batch experiment were investigated using different isotherm models. The Langmuir isotherm model fits the experimental data. This shows that… More >

Tobias Drieschner^1,2,*, Andreas Kandelbauer¹, Bernd Hitzmann², Karsten Rebner¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.024429

Abstract For optimization of production processes and product quality, often knowledge of the factors influencing the process outcome is compulsory. Thus, process analytical technology (PAT) that allows deeper insight into the process and results in a mathematical description of the process behavior as a simple function based on the most important process factors can help to achieve higher production efficiency and quality. The present study aims at characterizing a well-known industrial process, the transesterification reaction of rapeseed oil with methanol to produce fatty acid methyl esters (FAME) for usage as biodiesel in a continuous micro reactor set-up. To this end, a… More >

Xiaolong Ji^1,#, Shuli Zhang^1,#, Xueyuan Jin², Xin Yuan¹, Siqi Zhang¹, Xudan Guo^3,*, Fengcheng Shi^4,*, Yanqi Liu¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025844

Abstract Longan originates from southern China and has high nutritional and health value. Recent phytochemistry and pharmacology studies have shown that polysaccharides are a main bioactive component of longan. Longan polysaccharides possess antioxidant, anti-aging, anti-tumor, immunomodulatory, and other bioactivities. Hot-water extraction, ethanol precipitation, and ultrasonic extraction are generally used to extract water-soluble longan polysaccharides. However, the relationship between the structure and bioactivity of longan polysaccharides remains unclear, requiring further investigation. The aim of this review is to evaluate the current literature focusing on the extraction, purification, structural characterization, and biological activity of longan polysaccharides. We believe that this review would provide… More >

Elham Azadeh¹, Antonio Pizzi^1,2,*, Christine Gerardin-Charbonnier^1,*, Philippe Gerardin¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.027651

Abstract Non-isocyanate polyurethane (NIPU) foams from a commercial hydrolysable tannin extract, chestnut wood tannin extract, have been prepared to determine what chemical species and products are taking part in the reactions involved. This method is based on two main steps: the reaction with dimethyl carbonate and the formation of urethane bonds by further reaction of the carbonated tannin with a diamine-like hexamethylene diamine. The hydroxyl groups on the tannin polyphenols and on the carbohydrates intimately linked with it and part of a hydrolysable tannin are the groups involved in these reactions. The carbohydrate skeleton of the hydrolysable tannin is also able… More >

Waleed Awadalseed¹, Honghua Zhao¹, Hemei Sun², Ming Huang³, Cong Liu^4,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025100

Abstract This study examined the effects of using bagasse ash in replacement of ordinary Portland cement (OPC) in the treatment of expansive soils. The study concentrated on the compaction characteristics, volume change, compressive strength, splitting tensile strength, microstructure, California bearing ratio (CBR) value, and shear wave velocity of expansive soils treated with cement. Different bagasse ash replacement ratios were used to create soil samples. At varying curing times of 7, 14, and 28 days, standard compaction tests, unconfined compressive strength tests, CBR tests, Brazilian split tensile testing, and bender element (BE) tests were carried out. According to X-ray diffraction (XRD) investigations,… More >

Shuang Zhao¹, Shenglan Chen², Shuan Ren¹, Gang Li³, Ke Song^1,4, Jie Guo^1,4, Shima Liu^1,4, Jian He^1,4, Xianwu Zhou^1,4,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.026066

Abstract Petroleum-based materials, such as plastic, are characterized by adverse environmental pollution; as a result, researchers have sought alternative degradable plastics that are environmentally friendly, such as polylactic acid (PLA). PLA has shown great potential to replace petroleum-based plastics. In this study, seven different samples of unmodified Pueraria lobata root powder (PRP) with different contents (i.e., 0, 5, 10, 15, 20, 25, and 30 wt%) and three different modified PRPs (i.e., treated with NaOH, NaOH-KH-550, and Formic) were used to reinforce polylactic acid (PLA) via solution casting process. These prepared PRP/PLA composite films were characterized using SEM, FTIR, UV-visible spectra analysis,… More >

Qiushi Li^1,2,#, Ronggang Luo^1,2,#, Yu Chen³, Jinhui Xiong³, Bei Qiao¹, Xijuan Chai^1,2, Linkun Xie^1,2, Juan Wang³, Lianpeng Zhang^1,2,*, Siqun Wang⁴, Guanben Du^1,2, Kaimeng Xu^1,2,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.026184

Abstract To overcome the shortage of wood resources as well as to develop novel natural fibers materials, the Chimonobambusa quadrangularis (CQ) and Qiongzhuea tumidinoda (QT) planted in Southwest China were effectively isolated by the steam explosion (SE). The fine and uniform bamboo microfibers derived from CQ and QT were obtained, and their smallest average widths were 12.62 μm and 16.05 μm, respectively. The effects of steam explosion on the micro-morphology, chemical composition, thermal stability, crystallinity, surface wettability, and mechanical properties of bamboo microfibers were comprehensively investigated. The results showed that the relative content of cellulose in bamboo microfibers increased but the… More >