Faisal Jamil¹, Faiza Qayyum¹, Soha Alhelaly², Farjeel Javed³, Ammar Muthanna^4,5,*

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2513-2530, 2021, DOI:10.32604/cmc.2021.018809

Abstract Nowadays, the blockchain, Internet of Things, and artificial intelligence technology revolutionize the traditional way of data mining with the enhanced data preprocessing, and analytics approaches, including improved service platforms. Nevertheless, one of the main challenges is designing a combined approach that provides the analytics functionality for diverse data and sustains IoT applications with robust and modular blockchain-enabled services in a diverse environment. Improved data analytics model not only provides support insights in IoT data but also fosters process productivity. Designing a robust IoT-based secure analytic model is challenging for several purposes, such as data from diverse sources, increasing data size,… More >

Anhao Xiang, Jun Zheng^*

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2141-2158, 2021, DOI:10.32604/cmc.2021.018808

Abstract Distribution feeder microgrid (DFM) built based on existing distributed feeder (DF), is a promising solution for modern microgrid. DFM contains a large number of heterogeneous devices that generate heavy network traffice and require a low data delivery latency. The information-centric networking (ICN) paradigm has shown a great potential to address the communication requirements of smart grid. However, the integration of advanced information and communication technologies with DFM make it vulnerable to cyber attacks. Adequate authentication of grid devices is essential for preventing unauthorized accesses to the grid network and defending against cyber attacks. In this paper, we propose a new… More >

T. Prabhu^1,*, S. Chenthur Pandian²

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2549-2562, 2021, DOI:10.32604/cmc.2021.018793

Abstract This paper proposes, demonstrates, and describes a basic T-shaped Multi-Input and Multi-Output (MIMO) antenna with a resonant frequency of 3.1 to 10.6 GHz. Compared with the U-shaped antenna, the mutual coupling is minimized by using a T-shaped patch antenna. The T-shaped patch antenna shapes filter properties are tested to achieve separation over the 3.1 to 10.6 GHz frequency range. The parametric analysis, including width, duration, and spacing, is designed in the MIMO applications for good isolation. On the FR4 substratum, the configuration of MIMO is simulated. The appropriate dielectric material ɛ_r = 4.4 is introduced using this contribution and application… More >

Raja Jarray¹, Mujahed Al-Dhaifallah^2,*, Hegazy Rezk^3,4, Soufiene Bouallègue^1,5

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2159-2180, 2021, DOI:10.32604/cmc.2021.018752

Abstract Paths planning of Unmanned Aerial Vehicles (UAVs) in a dynamic environment is considered a challenging task in autonomous flight control design. In this work, an efficient method based on a Multi-Objective Multi-Verse Optimization (MOMVO) algorithm is proposed and successfully applied to solve the path planning problem of quadrotors with moving obstacles. Such a path planning task is formulated as a multicriteria optimization problem under operational constraints. The proposed MOMVO-based planning approach aims to lead the drone to traverse the shortest path from the starting point and the target without collision with moving obstacles. The vehicle moves to the next position… More >

Jian Li^1,3, Weijian Zhang¹, Yating Hu^1,4, Xiaoguang Li^2,*, Zhun Wang¹

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2493-2511, 2021, DOI:10.32604/cmc.2021.018743

Abstract This paper proposes a formation of multiple unmanned aerial vehicles (UAVs) based on the R5DOS (RCC-5 and orientation direction) intersection model. After improving the R5DOS-intersection model, we evenly arranged 16 UAVs in 16 spatial regions. Compared with those of the rectangular formation model and the grid formation model, the communication costs, time costs, and energy costs of the R5DOS model formation were effectively reduced. At the same time, the operation time of UAV formation was significantly enhanced. The leader-follower method can enhance the robustness of the UAV formation and ensure the integrity of communication during UAV formation operation. Finally, we… More >

Nidhi Kalra^1,*, Raman Kumar Goyal¹, Anshu Parashar¹, Jaskirat Singh¹, Gagan Singla²

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 1967-1978, 2021, DOI:10.32604/cmc.2021.018732

Abstract Every 24 seconds, someone dies on the road due to road accidents and it is the 8th leading cause of death and the first among children aged 15–29 years. 1.35 million people globally die every year due to road traffic crashes. An additional 20–50 million suffer from non-fatal injuries, often resulting in long-term disabilities. This costs around 3% of Gross Domestic Product to most countries, and it is a considerable economic loss. The governments have taken various measures such as better road infrastructures and strict enforcement of motor-vehicle laws to reduce these accidents. However, there is still no remarkable reduction… More >

C. Rajinikanth¹, P. Selvaraj², Mohamed Yacin Sikkandar³, T. Jayasankar⁴, Seifedine Kadry⁵, Yunyoung Nam^6,*

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2013-2029, 2021, DOI:10.32604/cmc.2021.018719

Abstract Internet of Things (IoT) has become a major technological development which offers smart infrastructure for the cloud-edge services by the interconnection of physical devices and virtual things among mobile applications and embedded devices. The e-healthcare application solely depends on the IoT and cloud computing environment, has provided several characteristics and applications. Prior research works reported that the energy consumption for transmission process is significantly higher compared to sensing and processing, which led to quick exhaustion of energy. In this view, this paper introduces a new energy efficient cluster enabled clinical decision support system (EEC-CDSS) for embedded IoT environment. The presented… More >

Yang Wang¹, Ying Tian^1,*, Ou Tian²

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2203-2216, 2021, DOI:10.32604/cmc.2021.018709

Abstract As the use of facial attributes continues to expand, research into facial age estimation is also developing. Because face images are easily affected by factors including illumination and occlusion, the age estimation of faces is a challenging process. This paper proposes a face age estimation algorithm based on lightweight convolutional neural network in view of the complexity of the environment and the limitations of device computing ability. Improving face age estimation based on Soft Stagewise Regression Network (SSR-Net) and facial images, this paper employs the Center Symmetric Local Binary Pattern (CSLBP) method to obtain the feature image and then combines… More >

Anabi Hilary Kelechi¹, Mohammed H. Alsharif², Anya Chukwudi-eke Anya³, Mathias U. Bonet¹, Samson Aiyudubie Uyi¹, Peerapong Uthansakul^4,*, Jamel Nebhen⁵, Ayman A. Aly⁶

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2405-2424, 2021, DOI:10.32604/cmc.2021.018686

Abstract Water is one of the needs with remarkable significance to man and other living things. Water quality management is a concept based on the continuous monitoring of water quality. The monitoring scheme aims to accumulate data to make decisions on water resource descriptions, identify real and emergent issues involving water pollution, formulate priorities, and plan for water quality management. The regularly considered parameters when conducting water quality monitoring are turbidity, pH, temperature, conductivity, dissolved oxygen, chemical oxygen demand, biochemical oxygen demand, ammonia, and metal ions. The usual method employed in capturing these water parameters is the manual collection and sending… More >

Mohamed Esmail Karar^1,2, Omar Reyad^1,3, Mohammed Abd-Elnaby⁴, Abdel-Haleem Abdel-Aty^5,6, Marwa Ahmed Shouman^7,*

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2295-2312, 2021, DOI:10.32604/cmc.2021.018671

Abstract Lightweight deep convolutional neural networks (CNNs) present a good solution to achieve fast and accurate image-guided diagnostic procedures of COVID-19 patients. Recently, advantages of portable Ultrasound (US) imaging such as simplicity and safe procedures have attracted many radiologists for scanning suspected COVID-19 cases. In this paper, a new framework of lightweight deep learning classifiers, namely COVID-LWNet is proposed to identify COVID-19 and pneumonia abnormalities in US images. Compared to traditional deep learning models, lightweight CNNs showed significant performance of real-time vision applications by using mobile devices with limited hardware resources. Four main lightweight deep learning models, namely MobileNets, ShuffleNets, MENet… More >