Mohamed I. A. Othman^1,2,3, W. M. Hasona^2,4, Nehal T. Mansour^2,5

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 203-220, 2015, DOI:10.3970/cmc.2015.045.203

Abstract The problem of the generalized thermoelastic medium for three different theories under the effect of a gravitational field is investigated. The Lord- Shulman, Green-Naghdi III, three-phase-lag theories are discussed with twotemperature. The normal mode analysis is used to obtain the analytical expressions of the displacement components, force stress, thermodynamic temperature and conductive temperature. The numerical results are given and presented graphically, when the thermal force is applied. Comparisons are made with the results predicted by three-phase-lag model, Green-Naghdi III and Lord-Shulman theories in the presence and absence of gravity as well as two temperature. More >

M.R. Akbari¹, J. Ghanbari^1,2

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 187-202, 2015, DOI:10.3970/cmc.2015.045.187

Abstract Exact analytical solution for functionally graded hollow discs under internal pressure, thermal load and rotation are provided in this paper. Material properties of discs, i.e. elastic modulus, density and thermal expansion coefficient are assumed to vary in radial direction. Two power functions are assumed for property dependency to study various types of functional grading of materials in the discs. Assuming small deformations, a differential equation is obtained and solved for the Airy stress function. The effects of various grading functions on the stress and deformation distribution are studied and an optimum value for the power is obtained. More >

M. Bendouba¹, A. Djebli¹, A. Aid¹, N. Benseddiq², M. Benguediab³

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 163-186, 2015, DOI:10.3970/cmc.2015.045.163

Abstract This work focuses on a linear elastic analysis by the finite element method and the development of a shape function, commonly known as geometrical correction factor, for the case of semi-elliptical crack in a cylindrical rod. We used the same shape function to analyze the behavior of the rod in the case of a viscoelastic medium materialized by a polymeric material such as HDPE. A linear viscoelastic model calibrated from a relaxation test was developed and implemented in Abaqus. Results showed a relatively good performance, compared with finite element method. More >

Jianfeng Lu¹, Xu Liang^1,2, Shuling Hu^1,2

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 145-162, 2015, DOI:10.3970/cmc.2015.045.145

Abstract Flexoelectricity phenomenologically describes the universal electromechanical coupling effect between electric polarization and strain gradient, and electric field gradient and elastic strain. In contrast to piezoelectricity which is invalid in materials with inversion symmetry, flexoelectricity exists, commonly, in all solid dielectrics. In this paper, a summary of the research on flexoelectricity is presented to illustrate the development of this topic. Flexoelectricity still have many open questions and unresolved issues in the developing field, although it has attracted a surge of attention recently. Here we review the theoretical investigations and experimental studies on flexoelectricity, and the aim of the current paper is… More >

D. Pandit¹, N. Thomas², Bhakti Patel¹, S.M. Srinivasan¹

CMC-Computers, Materials & Continua, Vol.45, No.2, pp. 127-144, 2015, DOI:10.3970/cmc.2015.045.127

Abstract In this paper, a class of problems involving space constrained loading on thin beams with large deflections is considered. The loading is such that, the locus of the force application point moves along an arbitrarily predefined path, fixed in space. Both linear elastic as well as elastic-perfectly plastic materials are considered. A simplification is realized using the moment-curvature relationship directly. The governing equation obtained is highly non-linear owing to inclusion of both material and geometric non-linearity. A general algorithm is described to solve the governing equation using an incremental formulation coupled with Runge Kutta 4^th order initial value explicit solver.… More >

M. Marin^1,2, A.M. Abd-Alla^3,4, D. Raducanu¹, S.M. Abo-Dahab^3,5

CMC-Computers, Materials & Continua, Vol.45, No.2, pp. 107-126, 2015, DOI:10.3970/cmc.2015.045.107

Abstract Our study is dedicated to mixed initial boundary value problem for porous micropolar bodies. We prove that the solution of this problem depends continuously on coefficients which couple the micropolar deformation equations with the equations that model the evolution of voids. The evaluation of this dependence is made by using an appropriate measure. More >

S.D. Akbarov^1,2, M.I. Ismailov³

CMC-Computers, Materials & Continua, Vol.45, No.2, pp. 75-106, 2015, DOI:10.3970/cmc.2015.045.075

Abstract The subject of the paper is the study of the dynamics of the moving load acting on the hydro-elastic system consisting of the elastic plate, compressible viscous fluid and rigid wall. Under this study the motion of the plate is described by linear elastodynamics, and the motion of the compressible viscous fluid is described by the linearized Navier-Stokes equations. Numerical results are obtained for the case where the material of the plate is steel, but the fluid material is Glycerin. According to these results, corresponding conclusions related to the influence of the problem parameters, such as fluid viscosity, plate thickness,… More >

Qingsheng Yang^1,2, Shaochong Yang^1,3, Xiaohu Lin⁴

CMC-Computers, Materials & Continua, Vol.45, No.1, pp. 57-74, 2015, DOI:10.3970/cmc.2015.045.057

Abstract An equivalent continuum model of an isogrid structure is utilized to analyze the impact response of isogrid structures and stiffened structures. The parameters of the equivalent model are determined, and the comparison between the equivalent continuous structure and the real grid structure are examined to validate the reliability of the equivalent model. Then, the impact responses of stiffened cylindrical shells with and without an elliptical hole are investigated by using the equivalent model of grid structures. For a different location and geometry of the elliptical hole, the deformation and load-bearing capacity of the grid-stiffened cylindrical shells are studied. The numerical… More >

Neeraj Dubey¹, Geeta Agnihotri¹

CMC-Computers, Materials & Continua, Vol.45, No.1, pp. 39-56, 2015, DOI:10.3970/cmc.2015.045.039

Abstract In this paper, midrib of coconut palm leaves (MCL) was investigated for the purpose of development of natural fiber reinforced polymer matrix composites. A new natural fiber composite as MCL/polyester is developed by the hand lay-up method, and the material and mechanical properties of the fiber, matrix and composite materials were evaluated. The effect of fiber content on the tensile, flexural, impact, compressive strength and heat distortion temperature (HDT) was investigated. It was found that the MCL fiber had the maximum tensile strength, tensile modulus flexural strength, flexural modulus and Izod impact strength of 177.5MPa, 14.85GPa, 316.04MPa and 23.54GPa, 8.23KJ/m²… More >

Ang Li¹, Guo-jian Shao^1,2, Pei-rong Du³, Sheng-yong Ding¹, Jing-bo Su⁴

CMC-Computers, Materials & Continua, Vol.45, No.1, pp. 17-38, 2015, DOI:10.3970/cmc.2015.045.017

Abstract This paper investigates the failure behaviors of stratified rocks under uniaxial compression using a digital image processing (DIP) based finite difference method (FDM). The two-dimensional (2D) mesostructure of stratified rocks, represented as the internal spatial distribution of two main rock materials (marble and greenschist), is first identified with the DIP technique. And then the binaryzation image information is used to generate the finite difference grid. Finally, the failure behaviors of stratified rock samples are simulated by FDM considering the inhomogeneity of rock materials. In the DIP, an image segmentation algorithm based on seeded region growing (SRG) is proposed, instead of… More >