Xu Xu¹, Xiaoteng Wang¹, Haitian Yang¹, Zhenjun Yang², Yiqian He^1,3,*

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048199

Abstract The multiscale method provides an effective approach for the numerical analysis of heterogeneous viscoelastic materials by reducing the degree of freedoms (DOFs). A basic framework of the Multiscale Scaled Boundary Finite Element Method (MsSBFEM) was presented in our previous works, but those works only addressed two-dimensional problems. In order to solve more realistic problems, a three-dimensional MsSBFEM is further developed in this article. In the proposed method, the octree SBFEM is used to deal with the three-dimensional calculation for numerical base functions to bridge small and large scales, the three-dimensional image-based analysis can be conveniently conducted in small-scale and coarse… More >

Deng Yang¹, Chong Zhou^1,*, Xuemeng Wei², Zhikun Chen³, Zheng Zhang⁴

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048049

Abstract In classification problems, datasets often contain a large amount of features, but not all of them are relevant for accurate classification. In fact, irrelevant features may even hinder classification accuracy. Feature selection aims to alleviate this issue by minimizing the number of features in the subset while simultaneously minimizing the classification error rate. Single-objective optimization approaches employ an evaluation function designed as an aggregate function with a parameter, but the results obtained depend on the value of the parameter. To eliminate this parameter’s influence, the problem can be reformulated as a multi-objective optimization problem. The Whale Optimization Algorithm (WOA) is… More >

Jing-Doo Wang¹, Chayadi Oktomy Noto Susanto^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048955

Abstract A significant obstacle in intelligent transportation systems (ITS) is the capacity to predict traffic flow. Recent advancements in deep neural networks have enabled the development of models to represent traffic flow accurately. However, accurately predicting traffic flow at the individual road level is extremely difficult due to the complex interplay of spatial and temporal factors. This paper proposes a technique for predicting short-term traffic flow data using an architecture that utilizes convolutional bidirectional long short-term memory (Conv-BiLSTM) with attention mechanisms. Prior studies neglected to include data pertaining to factors such as holidays, weather conditions, and vehicle types, which are interconnected… More >

Yunye Wan¹, Peng Chen², Yunni Xia^1,*, Yong Ma³, Dongge Zhu⁴, Xu Wang⁵, Hui Liu⁶, Weiling Li⁷, Xianhua Niu², Lei Xu⁸, Yumin Dong⁹

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048723

Abstract Mobile Edge Computing (MEC) is a promising technology that provides on-demand computing and efficient storage services as close to end users as possible. In an MEC environment, servers are deployed closer to mobile terminals to exploit storage infrastructure, improve content delivery efficiency, and enhance user experience. However, due to the limited capacity of edge servers, it remains a significant challenge to meet the changing, timevarying, and customized needs for highly diversified content of users. Recently, techniques for caching content at the edge are becoming popular for addressing the above challenges. It is capable of filling the communication gap between the… More >

Hao Qi¹, Mohamed Sharaf², Andres Annuk³, Adrian Ilinca⁴, Mohamed A. Mohamed^5,*

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048672

Abstract Hot dry rock (HDR) is rich in reserve, widely distributed, green, low-carbon, and has broad development potential and prospects. In this paper, a distributionally robust optimization (DRO) scheduling model for a regionally integrated energy system (RIES) considering HDR co-generation is proposed. First, the HDR-enhanced geothermal system (HDR-EGS) is introduced into the RIES. HDR-EGS realizes the thermoelectric decoupling of combined heat and power (CHP) through coordinated operation with the regional power grid and the regional heat grid, which enhances the system wind power (WP) feed-in space. Secondly, peak-hour loads are shifted using price demand response guidance in the context of time-of-day… More >

Ali S. Alghamdi^1,*, Mohamed A. Zohdy², Saad Aldoihi^3,4

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048839

Abstract In the contemporary era, the global expansion of electrical grids is propelled by various renewable energy sources (RESs). Efficient integration of stochastic RESs and optimal power flow (OPF) management are critical for network optimization. This study introduces an innovative solution, the Gaussian Bare-Bones Levy Cheetah Optimizer (GBBLCO), addressing OPF challenges in power generation systems with stochastic RESs. The primary objective is to minimize the total operating costs of RESs, considering four functions: overall operating costs, voltage deviation management, emissions reduction, voltage stability index (VSI) and power loss mitigation. Additionally, a carbon tax is included in the objective function to reduce… More >

Nasser Sweilam¹, Seham Al-Mekhlafi^2,*, Aya Ahmed³, Ahoud Alsheri⁴, Emad Abo-Eldahab³

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.047896

Abstract In this paper, two crossover hybrid variable-order derivatives of the cancer model are developed. Grünwald-Letnikov approximation is used to approximate the hybrid fractional and variable-order fractional operators. The existence, uniqueness, and stability of the proposed model are discussed. Adams Bashfourth’s fifth-step method with a hybrid variable-order fractional operator is developed to study the proposed models. Comparative studies with generalized fifth-order Runge-Kutta method are given. Numerical examples and comparative studies to verify the applicability of the used methods and to demonstrate the simplicity of these approximations are presented. We have showcased the efficiency of the proposed method and garnered robust empirical… More >

Jiaqi Wu¹, Li Zhuo^1,*, Jianliang Pei¹, Yao Li², Hongqiang Xie¹, Jiaming Wu¹, Huaizhong Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.046398

Abstract The surrounding geological conditions and supporting structures of underground engineering are often updated during construction, and these updates require repeated numerical modeling. To improve the numerical modeling efficiency of underground engineering, a modularized and parametric modeling cloud server is developed by using Python codes. The basic framework of the cloud server is as follows: input the modeling parameters into the web platform, implement Rhino software and FLAC^3D software to model and run simulations in the cloud server, and return the simulation results to the web platform. The modeling program can automatically generate instructions that can run the modeling process in… More >

Haoyi Zhong, Yongjiang Zhao, Chang Gyoon Lim^*

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.049208

Abstract This paper addresses the challenge of identifying abnormal states in Lithium-ion Battery (LiB) time series data. As the energy sector increasingly focuses on integrating distributed energy resources, Virtual Power Plants (VPP) have become a vital new framework for energy management. LiBs are key in this context, owing to their high-efficiency energy storage capabilities essential for VPP operations. However, LiBs are prone to various abnormal states like overcharging, over-discharging, and internal short circuits, which impede power transmission efficiency. Traditional methods for detecting such abnormalities in LiB are too broad and lack precision for the dynamic and irregular nature of LiB data.… More >

Haojie Lian¹, Jiaqi Wang¹, Leilei Chen^2,*, Shengze Li³, Ruochen Cao⁴, Qingyuan Hu⁵, Peiyun Zhao¹

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2024.048549

Abstract This paper presents a novel framework aimed at quantifying uncertainties associated with the 3D reconstruction of smoke from 2D images. This approach reconstructs color and density fields from 2D images using Neural Radiance Field (NeRF) and improves image quality using frequency regularization. The NeRF model is obtained via joint training of multiple artificial neural networks, whereby the expectation and standard deviation of density fields and RGB values can be evaluated for each pixel. In addition, customized physics-informed neural network (PINN) with residual blocks and two-layer activation functions are utilized to input the density fields of the NeRF into Navier-Stokes equations… More >