Liefei Pei^1,2, Xiangyun Zhang¹, Zizhou Yuan^1,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025760

Abstract Iron-based amorphous crystalline powder Fe₇₈Si₉B₁₃^AP is used as a permeability reaction barrier (PRB) combined with an electrokinetic method (EK-PRB) to study the removal rate of Cu in contaminated soil. After treating Cucontaminated soil for 5 days under different voltage gradients and soil water content, the soil pH is between 3.1 and 7.2. The increase of voltage gradient and soil water content can effectively promote the movement of Cu²⁺ to the cathode. The voltage gradient is 3 V/cm, and the water content of 40% is considered to be an optional experimental condition. Therefore, under this condition, the effects of Fe₇₈Si₉B₁₃^AP and… More >

Lingling Qin¹, Mengya Zhou¹, Jiahao Yan¹, Ping Duan^1,2,3,4,*, Yingcan Zhu^5,*, Wei Chen⁶, Zuhua Zhang⁷, Aiguo Wang²

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025197

Abstract Montmorillonite and clinoptilolite zeolite were used as representative materials to prepare calcined clay-cement binary cementitious materials in order to study the effect of calcination treatment on the activation of clay minerals and the activity difference between layered and framed clays in this research. The influence of different calcined clay content (2%, 4%, 6%, 8%, 10%) on the fluidity, compressive strength, microstructure, phase change, and hydration heat of cement-based materials were analyzed. The calcined clay improves the fluidity of cement-based materials as compared with the uncalcined group. The addition of calcined montmorillonite (CMT) improves the development of mechanical strength, and the… More >

Wei Xu^1,2, Ottavia Corbi^3,*, Seithati Mapesela¹, Yue Chen^1,2, Milan Gaff^4,5, Haitao Li^1,2,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.026773

Abstract Wood is a green material in line with the sustainable development strategy. From the excellent performance of engineering wood products, modern wood structures represented by light wood structures have gained more development opportunities. As an indispensable part of light wood structure systems, the wood-frame shear wall plays a vital role in the bearing capacity and earthquake resistance of light wood structure systems. This paper is focused on a review of the lateral performance of wood-frame shear walls and classifies the influencing factors in relevant experimental research into three categories, including internal factors such as shear wall structure, external factors such… More >

Ruaa H. Abbas¹, A. Kadhim^1,*, Azhar M. Haleem²

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025112

Abstract Copper oxide nanoparticles (CuO NPs) were synthesised with laser ablation of a copper sheet immersed in deionized water (DW), cetrimonium bromide (CTAB), and sodium dodecyl sulphate (SDS), respectively. The target was irradiated with a pulsed Nd: YAG laser at 1064 nm, 600 mJ, a pulse duration of 10 ns, and a repetition rate of 5 Hz. The CuO NPs colloidal were analyzed using UV–Vis spectroscopy, the Fourier transform infrared (FTIR) spectrometer, zeta potential (ZP), X-ray diffraction (XRD), transmission electron microscope (TEM) and field emission scanning electron microscopy (FESEM). The absorption spectra of CuO NPs colloidal showed peaks at 214, 215… More >

Medta Boupan^1,2, Kanyapak Prompang¹, Achiraya Chompunuch¹, Piwat Boonma¹, Arthit Neramittagapong^1,2,3,4, Somnuk Theerakulpisut⁵, Sutasinee Neramittagapong^1,2,3,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.026397

Abstract Isosorbide is a multi-purpose chemical that can be produced from renewable resources. Specifically, it has been investigated as a replacement for toxic bisphenol A (BPA) in the production of polycarbonate (PC). In this study, the synthesis of isosorbide by sorbitol dehydration using a cerium-based catalyst derived from calcined cerium (IV) sulfate (300°C, 400°C, 450°C, 500°C, and 650°C) was investigated. The reaction occurred in a high-pressure reactor containing nitrogen gas. Advanced instrumental techniques were applied to analyze the characteristics of the calcined catalyst. The results showed that the calcined catalysts demonstrated different crystalline structures and sulfate species at different temperatures. However,… More >

Nurul Anis Athirah Ab Aziz^*, Chin Wei Lai^*, Boon Hoong Ong

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025899

Abstract Nowadays, corrosion is not only undesirable, but it also has a significant influence on the industrial sectors and technical innovations that have demand for metals. The global economic damage is expected to reach $2.5 trillion, equivalent to more than 3.4% of the world’s GDP in 2013. It is linked with significant financial harm, manufacturing pollution, and safety issues. An electrochemical process primarily induces metal corrosion at the metalelectrolyte interface region, caused by steel oxidation and the reduction of oxygen, protons, and water. Therefore, organic and epoxy coatings can be applied as protective coatings. Additionally, it can prevent metal corrosion in… More >

Rafal A. Hadi^1,*, Suhad M. Abd², Hadee Mohammed Najm³, Shaker Qaidi^4,5,*, Moutaz Mustafa A. Eldirderi⁶, Khaled Mohamed Khedher^7,8

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025558

Abstract Recent years have witnessed an increase in the quantity of waste glass (WG) across the globe. Replacing the fine aggregate with WG is one of the steps toward preserving the natural resources of the environment and creating low-cost concrete. The present study is concerned with replacing fine aggregates with glass powder (GP) at (0%, 15%, 30%, and 50%). It has studied the fresh and hardened properties (compressive strength, tensile strength, hardened density, and slump) for all the mentioned percent replacements. The findings have shown that all mixtures containing GP gave acceptable slump results within the design limits (2–5 cm) according… More >

Yatim Lailun Ni’mah^*, Nabila Eka Yuningsih, Suprapto Suprapto

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025431

Abstract The adsorption of Pb(II) on silica gel synthesized from chemical glass bottle waste has been studied. The effect of independent variables (adsorbent dose, initial concentration of Pb(II), contact time, and pH) on the Pb(II) removal from water was evaluated and optimized using the Response Surface Methodology (RSM). Under optimized conditions (adsorbent dose: 20 mg; contact time: 30 min; initial Pb(II) concentration: 120 mg. L⁻¹ ; and pH: 8), the removal of Pb(II) was 99.77%. The adsorption equilibrium data obtained from the batch experiment were investigated using different isotherm models. The Langmuir isotherm model fits the experimental data. This shows that… More >

Tobias Drieschner^1,2,*, Andreas Kandelbauer¹, Bernd Hitzmann², Karsten Rebner¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.024429

Abstract For optimization of production processes and product quality, often knowledge of the factors influencing the process outcome is compulsory. Thus, process analytical technology (PAT) that allows deeper insight into the process and results in a mathematical description of the process behavior as a simple function based on the most important process factors can help to achieve higher production efficiency and quality. The present study aims at characterizing a well-known industrial process, the transesterification reaction of rapeseed oil with methanol to produce fatty acid methyl esters (FAME) for usage as biodiesel in a continuous micro reactor set-up. To this end, a… More >

Xiaolong Ji^1,#, Shuli Zhang^1,#, Xueyuan Jin², Xin Yuan¹, Siqi Zhang¹, Xudan Guo^3,*, Fengcheng Shi^4,*, Yanqi Liu¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.025844

Abstract Longan originates from southern China and has high nutritional and health value. Recent phytochemistry and pharmacology studies have shown that polysaccharides are a main bioactive component of longan. Longan polysaccharides possess antioxidant, anti-aging, anti-tumor, immunomodulatory, and other bioactivities. Hot-water extraction, ethanol precipitation, and ultrasonic extraction are generally used to extract water-soluble longan polysaccharides. However, the relationship between the structure and bioactivity of longan polysaccharides remains unclear, requiring further investigation. The aim of this review is to evaluate the current literature focusing on the extraction, purification, structural characterization, and biological activity of longan polysaccharides. We believe that this review would provide… More >