Jianwei Zhang¹, Yue Yin¹, Lei Shi¹, Yi Han², Mi Zhou^3,*, Xihong Zhang⁴

Journal of Renewable Materials, Vol.11, No.6, pp. 2893-2911, 2023, DOI:10.32604/jrm.2023.025436 - 10 April 2023

Abstract Dust is an environmental and health hazard. In this study, a new technology for dust suppressant is introduced using soybean urease with an optimal cementing solution. Calcium carbonate is produced by soybean urease and cementing solution, which bonds the soil particles towards a dust suppressant. A laboratory wind tunnel test is carried out to examine its effectiveness and discover possible optimization solutions. Several factors, including soybean meal concentration, cementing solution concentration, and volume of solution per unit area, are examined to quantify their influences on soil transport mass, evaporation ratio, evaporation rate, surface strength, water… More >

Zhuoli Yang¹, Xianbin Hou², Leyang Dai^2,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2941-2951, 2023, DOI:10.32604/jrm.2023.025723 - 27 April 2023

Abstract Plasma-assisted ball milling was carried out on the Al+C₃H₆N₆ system and Al+C₄H₄N₄ system, respectively. The phase structure, functional groups and synthesis mechanism were analyzed by XRD and FT-IR, and the differences in the synthesis process of nano-AlN with different solid nitrogen sources were discussed. The results show that C₃H₆N₆ has a stable triazine ring structure, and its chemical bond is firm and difficult to break, so AlN cannot be synthesized directly by solid-solid reaction at room temperature. However, there are a large number of nitrile groups (-CN) and amino groups (-NH2) in C₄H₄N₄ molecules. Under the combined… More >

Sri Hidayati^1,*, Eugenia Fonny Budiyanto¹, Hadi Saputra¹, Sutopo Hadi¹, Apri Heri Iswanto^2,3, Nissa Nurfajrin Solihat⁴, Petar Antov⁵, Lee Seng Hua^6,7, Widya Fatriasari^4,8, Mohd. Sapuan Salit⁹

Journal of Renewable Materials, Vol.11, No.6, pp. 2865-2879, 2023, DOI:10.32604/jrm.2023.027579 - 27 April 2023

Abstract Black liquor is obtained as a by-product of the pulping process, which is used to convert biomass into pulp by removing lignin, hemicelluloses and other extractives from wood to free cellulose fibers. Lignin represents a major constituent in black liquor, with quantities varying from 20% to 30%, of which a very low share is used for manufacturing value-added products, while the rest is mainly burned for energy purposes, thus underestimating its great potential as a raw material. Therefore, it is essential to establish new isolation and extraction methods to increase lignin valorization in the development… More > Graphic Abstract

Yue Chen^1,2, Haitao Li^1,2,*, Lei Gao^3,*, Wei Xu^1,2, Rodolfo Lorenzo⁴, Milan Gaff^5,6

Journal of Renewable Materials, Vol.11, No.6, pp. 2787-2808, 2023, DOI:10.32604/jrm.2023.027634 - 27 April 2023

Abstract Bamboo is an eco-friendly material with light weight, high strength, short growth cycle and high sustainability, which is widely used in building structures. Engineered bamboo has further promoted the development of modern bamboo structures due to its unrestricted size and shape. However, as a fiber-reinforced material, fracture damage, especially Mode I fracture damage, becomes the most likely damage mode of its structure, so Mode I fracture characteristics are an important subject in the research of mechanical properties of bamboo. This paper summarizes the current status of experimental research on the Mode I fracture properties of More >

Liefei Pei^1,2, Xiangyun Zhang¹, Zizhou Yuan^1,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2969-2983, 2023, DOI:10.32604/jrm.2023.025760 - 27 April 2023

Abstract Iron-based amorphous crystalline powder Fe₇₈Si₉B₁₃^AP is used as a permeability reaction barrier (PRB) combined with an electrokinetic method (EK-PRB) to study the removal rate of Cu in contaminated soil. After treating Cucontaminated soil for 5 days under different voltage gradients and soil water content, the soil pH is between 3.1 and 7.2. The increase of voltage gradient and soil water content can effectively promote the movement of Cu²⁺ to the cathode. The voltage gradient is 3 V/cm, and the water content of 40% is considered to be an optional experimental condition. Therefore, under this condition, the More >

Nurul Anis Athirah Ab Aziz^*, Chin Wei Lai^*, Boon Hoong Ong

Journal of Renewable Materials, Vol.11, No.6, pp. 2745-2770, 2023, DOI:10.32604/jrm.2023.025899 - 27 April 2023

Abstract Nowadays, corrosion is not only undesirable, but it also has a significant influence on the industrial sectors and technical innovations that have demand for metals. The global economic damage is expected to reach $2.5 trillion, equivalent to more than 3.4% of the world’s GDP in 2013. It is linked with significant financial harm, manufacturing pollution, and safety issues. An electrochemical process primarily induces metal corrosion at the metalelectrolyte interface region, caused by steel oxidation and the reduction of oxygen, protons, and water. Therefore, organic and epoxy coatings can be applied as protective coatings. Additionally, it… More > Graphic Abstract

Rafal A. Hadi^1,*, Suhad M. Abd², Hadee Mohammed Najm³, Shaker Qaidi^4,5,*, Moutaz Mustafa A. Eldirderi⁶, Khaled Mohamed Khedher^7,8

Journal of Renewable Materials, Vol.11, No.6, pp. 2925-2940, 2023, DOI:10.32604/jrm.2023.025558 - 27 April 2023

Abstract Recent years have witnessed an increase in the quantity of waste glass (WG) across the globe. Replacing the fine aggregate with WG is one of the steps toward preserving the natural resources of the environment and creating low-cost concrete. The present study is concerned with replacing fine aggregates with glass powder (GP) at (0%, 15%, 30%, and 50%). It has studied the fresh and hardened properties (compressive strength, tensile strength, hardened density, and slump) for all the mentioned percent replacements. The findings have shown that all mixtures containing GP gave acceptable slump results within the More >

Yatim Lailun Ni’mah^*, Nabila Eka Yuningsih, Suprapto Suprapto

Journal of Renewable Materials, Vol.11, No.6, pp. 2913-2924, 2023, DOI:10.32604/jrm.2023.025431 - 27 April 2023

Abstract The adsorption of Pb(II) on silica gel synthesized from chemical glass bottle waste has been studied. The effect of independent variables (adsorbent dose, initial concentration of Pb(II), contact time, and pH) on the Pb(II) removal from water was evaluated and optimized using the Response Surface Methodology (RSM). Under optimized conditions (adsorbent dose: 20 mg; contact time: 30 min; initial Pb(II) concentration: 120 mg. L⁻¹ ; and pH: 8), the removal of Pb(II) was 99.77%. The adsorption equilibrium data obtained from the batch experiment were investigated using different isotherm models. The Langmuir isotherm model fits the experimental More >

Elham Azadeh¹, Antonio Pizzi^1,2,*, Christine Gerardin-Charbonnier^1,*, Philippe Gerardin¹

Journal of Renewable Materials, Vol.11, No.6, pp. 2823-2848, 2023, DOI:10.32604/jrm.2023.027651 - 27 April 2023

Abstract Non-isocyanate polyurethane (NIPU) foams from a commercial hydrolysable tannin extract, chestnut wood tannin extract, have been prepared to determine what chemical species and products are taking part in the reactions involved. This method is based on two main steps: the reaction with dimethyl carbonate and the formation of urethane bonds by further reaction of the carbonated tannin with a diamine-like hexamethylene diamine. The hydroxyl groups on the tannin polyphenols and on the carbohydrates intimately linked with it and part of a hydrolysable tannin are the groups involved in these reactions. The carbohydrate skeleton of the… More > Graphic Abstract

Shuang Zhao¹, Shenglan Chen², Shuan Ren¹, Gang Li³, Ke Song^1,4, Jie Guo^1,4, Shima Liu^1,4, Jian He^1,4, Xianwu Zhou^1,4,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2531-2553, 2023, DOI:10.32604/jrm.2023.026066 - 27 April 2023

Abstract Petroleum-based materials, such as plastic, are characterized by adverse environmental pollution; as a result, researchers have sought alternative degradable plastics that are environmentally friendly, such as polylactic acid (PLA). PLA has shown great potential to replace petroleum-based plastics. In this study, seven different samples of unmodified Pueraria lobata root powder (PRP) with different contents (i.e., 0, 5, 10, 15, 20, 25, and 30 wt%) and three different modified PRPs (i.e., treated with NaOH, NaOH-KH-550, and Formic) were used to reinforce polylactic acid (PLA) via solution casting process. These prepared PRP/PLA composite films were characterized using SEM,… More > Graphic Abstract