Xintong Chen, Pinghua Zhu^*, Xiancui Yan, Lei Yang, Huayu Wang

Journal of Renewable Materials, Vol.11, No.6, pp. 2953-2967, 2023, DOI:10.32604/jrm.2023.027140 - 27 April 2023

Abstract With the emphasis on environmental issues, the recycling of waste concrete, even recycled concrete, has become a hot spot in the field of architecture. But the repeated recycling of waste concrete used in harsh environments is still a complex problem. This paper discusses the durability and recyclability of recycled aggregate concrete (RAC) as a prefabricated material in the harsh environment, the effect of high-temperature curing (60°C, 80°C, and 100°C) on the frost resistance of RAC and physical properties of the second generation recycled coarse aggregate (RCA₂) of RAC after 300 freeze-thaw cycles were studied. The frost… More >

Kai Zhu¹, Hao Chen^1,*, Shuang Wang^1,*, Chuan Yuan^1,2, Bin Cao³, Jun Ni¹, Lujiang Xu⁴, Anqing Zheng⁵, Arman Amani Babadi¹

Journal of Renewable Materials, Vol.11, No.6, pp. 2849-2864, 2023, DOI:10.32604/jrm.2023.026317 - 27 April 2023

Abstract Microalgae biomass is an ideal precursor to prepare renewable carbon materials, which has broad application. The bioaccumulation efficiency (lipids, proteins, carbohydrates) and biomass productivity of microalgae are influenced by spectroscopy during the culture process. In this study, a bilayer plate-type photobioreactor was designed to cultivate Chlorella protothecoides with spectral selectivity by nanofluids. Compared to culture without spectral selectivity, the spectral selectivity of Ag/CoSO₄ nanofluids increased microalgae biomass by 5.76%, and the spectral selectivity of CoSO₄ solution increased by 17.14%. In addition, the spectral selectivity of Ag/CoSO₄ nanofluids was more conducive to the accumulation of nutrients (29.46% lipids, 50.66% More > Graphic Abstract

Honghong Wang¹, Zhixin Xiong^1,*, Yunchao Hu¹, Zhijian Liu¹, Long Liang²

Journal of Renewable Materials, Vol.11, No.6, pp. 2713-2727, 2023, DOI:10.32604/jrm.2023.025817 - 27 April 2023

Abstract This study aims to realize the sharing of near-infrared analysis models of lignin and holocellulose content in pulp wood on two different batches of spectrometers and proposes a combined algorithm of SPA-DS, MCUVE-DS and SiPLS-DS. The Successive Projection Algorithm (SPA), the Monte-Carlo of Uninformative Variable Elimination (MCUVE) and the Synergy Interval Partial Least Squares (SiPLS) algorithms are respectively used to reduce the adverse effects of redundant information in the transmission process of the full spectrum DS algorithm model. These three algorithms can improve model transfer accuracy and efficiency and reduce the manpower and material consumption… More >

Kunpeng Zhao, Yang Wei^*, Si Chen, Kang Zhao, Mingmin Ding

Journal of Renewable Materials, Vol.11, No.6, pp. 2695-2712, 2023, DOI:10.32604/jrm.2023.025711 - 27 April 2023

Abstract The destruction of recombinant bamboo depends on many factors, and the complex ambient temperature is an important factor affecting its basic mechanical properties. To investigate the failure mechanism and stress–strain relationship of recombinant bamboo at different temperatures, eighteen tensile specimens of recombinant bamboo were tested. The results showed that with increasing ambient temperature, the typical failure modes of recombinant bamboo were flush fracture, toothed failure, and serrated failure. The ultimate tensile strength, ultimate strain and elastic modulus of recombinant bamboo decreased with increasing temperature, and the ultimate tensile stress decreased from 154.07 to 96.55 MPa, a decrease More > Graphic Abstract

Liying Wang^*, Junzhi Liu, Chong Gao, Xinxin Yan

Journal of Renewable Materials, Vol.11, No.6, pp. 2679-2694, 2023, DOI:10.32604/jrm.2023.025569 - 27 April 2023

Abstract Oil dispersible suspension concentrates are safe, green, and environmentally friendly formulations. Problems such as layering, pasting, and bottoming are frequently encountered during the production, storage, and transportation process. Polyisobutylene succinimide functions as a dispersant and exhibits great potential to improve the physical stability of the oil dispersible suspension concentrate. From a microscopic perspective, the sorption characteristics of the polyisobutylene succinimide dispersant T151 on penoxsulam particle surfaces were comprehensively evaluated with XPS, FTIR, and SEM. The T151 adsorption procedure complied with a pseudo-second-order kinetic adsorption model, and it was a kind of physical sorption with an… More > Graphic Abstract

Chengxiang Li, Yue Wu, Chunhui Zhang^*, Yao Liu, Qixuan Lin, Junli Ren^*

Journal of Renewable Materials, Vol.11, No.6, pp. 2555-2574, 2023, DOI:10.32604/jrm.2023.026908 - 27 April 2023

Abstract Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process. This work aimed to propose a process for the co-production of dissolving pulp, furfural, and lignin from eucalyptus. High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid (ELA) pretreatment, Kraft cooking, and elementary chlorine-free (ECF) bleaching. The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system, and lignin during Kraft cooking and ECF was recovered. The process condition was discussed as well as the mass flow direction. The results showed that ELA pretreatment could effectively… More >

Jianping Deng¹, Qianqian Zhang¹, Yuling Lan¹, Lingcong Luo¹, Zimin Dai¹, Zhonghang Lin¹, Zhixin Lu¹, Jiancheng Yuan¹, Yiqi Fu¹, Lu Luo^2,*, Weigang Zhao^1,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2631-2646, 2023, DOI:10.32604/jrm.2023.027163 - 27 April 2023

Abstract The development and utilization of biomass and agroforestry processing byproducts for high-value applications have been an important topic in the field of renewable materials research. Based on this, a two-step microwave hydrothermal pre-carbonization and KOH activation method was proposed to synthesize tannin-based activated carbons with a high specific surface area, hierarchical pore structure, and good electrochemical performance. The microstructure, texture properties, and physicochemical characteristics were investigated. The results show that the prepared tannin-based activated carbons presented a hierarchical pore structure (micro- and mesopores) with a specific surface area as high as 997.46 m³ g⁻¹ . The… More > Graphic Abstract

S. E. Burruel-Ibarra¹, R. A. Esquer-Osuna², R. G. Valdez-Melchor², D. A. Cuevas-Acuña², L. QuihuiCota³, J. Juárez⁴, J. C. Campos-García², E. Valbuena-Gregorio², M. A. López-Mata^2,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2647-2663, 2023, DOI:10.32604/jrm.2023.027372 - 27 April 2023

Abstract This study aimed to characterize the physical-chemical and biological properties of pectin (PC)/chia seed mucilage (CM) membranes. PC/CM [100/0 (control), 80/20%, 60/40%, and 40/60% w/w] membranes were prepared using the casting method. The membranes (PC/CM) were thin, yellow, lightly opaque (≈10%) and capable of blocking light UVB (between 66 at 52%). SEM analysis showed the presence of aggregates in the shape of a sphere (≈13 µm) and ovoid (≈25 µm). The proportion of 80/20 showed an increase in tensile strength (29%) and elastic modulus (19%) when compared to the control. FTIR analysis exhibited intermolecular interactions More > Graphic Abstract

Abdulmoseen Segun Giwa^1,*, Mingqiang Sheng², Ndungutse Jean Maurice³, Xinxin Liu¹, Zelong Wang¹, Fengmin Chang⁴, Bo Huang⁴, Kaijun Wang⁴

Journal of Renewable Materials, Vol.11, No.6, pp. 2593-2629, 2023, DOI:10.32604/jrm.2023.026314 - 27 April 2023

Abstract Globally, fossil fuel dependence has created several environmental challenges and climate change. Hence, creating other alternative renewable and ecologically friendly bio-energy sources is necessary. Lignocellulosic biomass has gained significant attention recently as a renewable material for biofuel production. The large amounts of plantain and banana plant parts wasted after harvesting, as well as the peels generated daily by the fruit market and industries, demonstrate the potential of bioenergy resources. This review briefly assesses plantain and banana plant biomass (PBB) generated in the developing, developed, and underdeveloped countries, the consumable parts, and feasible products yield. It… More > Graphic Abstract

Kakudji Kisimba¹, Anand Krishnan^2,*, Mbuso Faya¹, Kahumba Byanga³, Kabange Kasumbwe⁴, Kaliyapillai Vijayakumar⁵, Ram Prasad^6,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2575-2591, 2023, DOI:10.32604/jrm.2023.026159 - 27 April 2023

Abstract Nanoparticles have distinct properties that make them potentially valuable in a variety of industries. As a result, emerging approaches for the manufacture of nanoparticles are gaining a lot of scientific interest. The biological pathway of nanoparticle synthesis has been suggested as an effective, affordable, and environmentally safe method. Synthesis of nanoparticles through physical and chemical processes uses unsafe materials, expensive equipment and adversely affects the environment. As a result, in order to support the increased utilization of nanoparticles across many sectors, nanotechnology research activities have shifted toward environmentally safe and cost-effective techniques that outperform chemical… More > Graphic Abstract