Rui Wang, Lanlan Shi, Yurong Wang^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3285-3302, 2022, DOI:10.32604/jrm.2022.020546 - 14 July 2022

Abstract Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), compressive strength parallel to grain, and hardness of Catalpa bungei clones were investigated in this study with feasibility of predicting these properties by near-infrared (NIR) spectroscopy. The best candidate ‘Luoqiu 3’ has been selected from three clones based on wood physical and mechanical property indices. Lower values of wood physical and mechanical properties have been found in the corewood compared to the outerwood. There were significant positive correlations between the air-dry density and mechanical properties. Information from cross section for air-dry density, compressive strength parallel to More >

Yuhao Zhou, Yuhang He, Zhaoyu Shen, Zheng Wang^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3459-3476, 2022, DOI:10.32604/jrm.2022.021251 - 14 July 2022

Abstract In this article, dynamic method and static method of testing Poisson’s ratio of OSB (Oriented Strand Board) were proposed. Through modal and static numerical analyses, the position where the transverse stress is equal to zero was determined. The binary linear regression method was applied to express the gluing position of the strain gauge as a relational expression that depended on the length-width ratio and width-thickness ratio of the cantilever plate. Then the longitudinal and transverse Poisson’s ratios of OSB were measured by the given dynamic and static methods. In addition, the test results of OSB More >

Min Huang, Zhirong Liu^*, Xiang Li

Journal of Renewable Materials, Vol.10, No.12, pp. 3351-3372, 2022, DOI:10.32604/jrm.2022.022393 - 14 July 2022

Abstract In order to achieve the goal of circular economy and sustainable development of ecological environment, it is important to separate and recover associated elements from rare mineral resources. Compared with traditional physical and chemical remediation methods of contaminated soil, phytoremediation is regarded as the most promising green in-situ restoration technology. The purpose of this review is to effectively alleviate the environmental problems caused by rare tailings contaminated soil through phytoremediation and realize the recovery of uranium-thorium, rare earth elements (REEs) and tantalum-niobium. This review took rare tailings with uranium-thorium, REEs, tantalum-niobium in China as the… More >

Qingguo Ben¹, Congcong Zhang², Benkai Shi², Huifeng Yang^2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3599-3610, 2022, DOI:10.32604/jrm.2022.022344 - 14 July 2022

Abstract Stress laminated timber (SLT) deck is assembled using timber (lumber or glulam) components placed side by side and stressed together, which has the advantages of easy prefabrication and good cost performance. This work presented an experimental investigation of bending tests performed on SLT slabs. Several parameters, including prestress levels, distance of pre-stressing bars, and the existence of self-tapping screw (STS) reinforcement, were taken into consideration. To reinforce the compressive property of timber perpendicular to the grain, the STSs were placed under the anchor plate of the pre-stressed bars. The experimental results were analyzed and discussed More > Graphic Abstract

Huailin Li^1,2, Chan Zhang¹, Shisheng Zhou^1,2,*, Bin Du^1,2, Xue Li¹

Journal of Renewable Materials, Vol.10, No.12, pp. 3425-3438, 2022, DOI:10.32604/jrm.2022.021157 - 14 July 2022

Abstract Printing quality evaluation is an important means to check whether prints are qualified. However, the current printing quality evaluation system for gravure decorative paper is not perfect. In order to solve this problem, a method for evaluating quality of decorative paper based on analytical hierarchy process (AHP) and the entropy weight method (EWM) model is proposed in this paper. So as to verify the proposed model, decorative paper of different grades was selected as the experimental objects. Firstly, the data about five indices reflecting printing quality were measured. Secondly, the evaluation model was used to More > Graphic Abstract

Kangze Yuan¹, Kui Liu^1,2,*, Guoyang Yi³, Bowen Yang²

Journal of Renewable Materials, Vol.10, No.12, pp. 3611-3627, 2022, DOI:10.32604/jrm.2022.022458 - 14 July 2022

Abstract Cement Stabilized Loess (CSL) sample has a long history as a method of improving building foundations. In this paper, the main physical (specific gravity, consistency limit, optimum moisture content, and maximum dry density) and mechanical properties (Unconfined Compressive Strength (UCS) and shear strength parameters) of CSL samples with different cement content were investigated, and the change reasons were explored by mean of SEM test. Meanwhile, quantitative analysis software Image-Pro Plus (IPP) 6.0 was used to characterize the microstructural evolution of pores in compacted loess and CSL sample. As the cement content increased, the specific gravity… More > Graphic Abstract

Xiaoxia Yang¹, Yisheng Gao^2,*, Shuhua Zhang¹, Zhedong Ge¹, Yucheng Zhou¹

Journal of Renewable Materials, Vol.10, No.12, pp. 3587-3598, 2022, DOI:10.32604/jrm.2022.022300 - 14 July 2022

Abstract Rosewood is a kind of high-quality and precious wood in China. The correct identification of rosewood species is of great significance to the import and export trade and species identification of furniture materials. In this paper, micro CT was used to obtain the micro images of cross sections, radial sections and tangential sections of 24 kinds of rosewood, and the data sets were constructed. PCA method was used to reduce the dimension of four features including logical binary pattern, local configuration pattern, rotation invariant LBP, uniform LBP. These four features and one feature not reducing… More > Graphic Abstract

Muzi Liao^1,2,#, Hui Tong^1,2,#, Xiangya Huang^1,2, Fang Liu³, Jingwei He^3,*, Sui Mai^1,2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3201-3215, 2022, DOI:10.32604/jrm.2022.022090 - 14 July 2022

Abstract Novel branched silicone methacrylate was developed. The mechanical and biological properties of the resin system were investigated to select the formula proportion with the best overall performance. The novel silicone-containing monomers were combined with an incremental sequence of glass filler concentrations in commonly used Bis-GMA/TEGDMA (50/50, wt./wt.) dental resin systems. Physicochemical properties, surface properties, antibacterial adhesion effect, anti-biofilm effect, protein adsorption, and cytotoxicity were evaluated. The results showed that BSMs did not affect the double bond conversion of dental resin, but could reduce volumetric shrinkage (p < 0.05). The BSM containing resins can resist protein and… More >

Bo Chen¹, Bo Liu^2,*, Yong Chao³, Chao Zhong¹

Journal of Renewable Materials, Vol.10, No.12, pp. 3491-3504, 2022, DOI:10.32604/jrm.2022.021302 - 14 July 2022

Abstract The formation process of aromatic hydrocarbon tar during the pyrolysis process of biomass components of cellulose and lignin was carried out by quantum chemical calculation based on density functional theory method B3LYP/6-31G++(d, p). 5-Hydroxymethylfurfural was chosen as the model compound of cellulose and hemicellulose, and syringaldehyde was chosen as the model compound of lignin. The calculation results show that the formation process of cellulose monocyclic aromatic hydrocarbon tar is the conversion process of benzene ring from furan ring, and the highest reaction energy barrier appears in the process of decarbonylation, which is 370.8 kJ/mol. The… More >

Weixing Zhang, Chunxia He^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3263-3283, 2022, DOI:10.32604/jrm.2022.020516 - 14 July 2022

Abstract With the exponential growth of the computing power, machine learning techniques have been successfully used in various applications. This paper intended to predict and optimize the shear strength of single lap cassava starchbased adhesive joints for comparison with the application of artificial intelligence (AI) methods. The shear strength was firstly determined by the experiment with three independent experimental variables (starch content, NaOH concentration and reaction temperature). The analysis of range (ANORA) and analysis of variance (ANOVA) were applied to investigate the optimal combination and the significance of each factor for the shear strength based on… More >