Long Zheng, Yiqiang Wu, Shu Wang, Guoan Sheng, Baorong Sun, Yingfeng Zuo^*

Journal of Renewable Materials, Vol.9, No.10, pp. 1729-1739, 2021, DOI:10.32604/jrm.2021.015143 - 12 May 2021

Abstract This study was designed to solve the problem of large waste volume from bamboo processing residues in recent years. Using magnesium oxychloride (MO) cementitious material as the main material and bamboo residue (BR) as the reinforcing material, a BR/MO composite material was prepared. The effects of BR amount on the molding properties, mechanical strength, and water resistance of BR/MO composites were examined and discussed. Scanning electron microscopy (SEM), X-ray diffractometry (XRD), and thermogravimetric analysis were used to characterize composite microscopic morphology, crystalline structure, and heat resistance. The results showed that, when the BR content was… More >

Heru Suryanto^1,2,*, Muhamad Muhajir¹, Bili Darnanto Susilo¹, Yanuar Rohmat Aji Pradana¹, Husni Wahyu Wijaya^2,3, Abu Saad Ansari⁴, Uun Yanuhar⁵

Journal of Renewable Materials, Vol.9, No.10, pp. 1717-1728, 2021, DOI:10.32604/jrm.2021.015312 - 12 May 2021

Abstract The microstructure of bacterial cellulose nanofibers (BCNs) film affects its characteristic. One of several means to engineer the microstructure is by changing the BCNs size and fiber distribution through a high-pressure homogenizer (HPH) process. This research aimed to find out the effects of repetition cycles on HPH process towards BCNs film characteristics. To prepare BCNs films, a pellicle from the fermentation of pineapple peels waste with Acetobacter xylinum (A. xylinum) was extracted, followed by crushing the pellicle with a high-speed blender, thereafter, homogenized using HPH at 150 bar pressure with variations of 5, 10, 15, and 20… More >

Ling Wang^1,2, Chenchen Huang¹, Ping Zhang³, Fenghua Liu^1,*, Ting Zou¹, Zhixiang Li¹, Jianfei Zhang¹, Gaojie Xu¹

Journal of Renewable Materials, Vol.9, No.10, pp. 1707-1715, 2021, DOI:10.32604/jrm.2021.013884 - 12 May 2021

Abstract Using palygorskite (PAL) as template, the PAL/TiO₂/PANI nano-rods were synthesized by heterogeneous precipitation and in-situ polymerization. The synthesized PAL/TiO₂/PANI nanorods were used as a novel electrorheological (ER) fluid by mixing with silicone oil, which showed excellent ER effect. The yield stress of the PAL/TiO₂/PANI based ER fluid (15 vol%) reached 8.8 kPa under 4 kV mm⁻¹ electric field. The dynamic shear stress of the PAL/TiO₂/PANI based ER fluid could maintain a stable level in the shear rate range of 0.1–100 s⁻¹ . Furthermore, the PAL/TiO₂/PANI ER fluid exhibited excellent suspension stability. More >

Sakorn Inthachai¹, Supasit Paengson², Jindaporn Jamradloedluk^1,*, Tosawat Seetawan^2,*

Journal of Renewable Materials, Vol.9, No.10, pp. 1685-1697, 2021, DOI:10.32604/jrm.2021.015553 - 12 May 2021

Abstract A novel roof tile thermoelectric generator (RT-TEG) was used to harvest electrical energy from a solar heat source. The RT-TEG was fabricated and simulated by flat and curved thermoelectric modules consisting of p-n junctions of p-Sb₂Te₃ and n-Bi₂Te₃, with an Al₂O₃ substrate at the top and bottom for heat absorption and heat rejection. The RT-TEG was installed in a roof tile to act as a generator. The electrical voltage and power values of the curved thermoelectric modules were higher than those of the flat thermoelectric module by 0.44 V and 80 mW, at a temperature difference (ΔT) More > Graphic Abstract

Qiaoguang Li¹, Xuming Yan¹, Jialong Chen¹, Xugang Shu^1,*, Puyou Jia^2,*, Xiangjun Liang³

Journal of Renewable Materials, Vol.9, No.10, pp. 1673-1684, 2021, DOI:10.32604/jrm.2021.014695 - 12 May 2021

Abstract Environmental cleaning is an important aspect of bacteria control. Ethyl cellulose microcapsules containing potassium monopersulfate (PMCM) were prepared by emulsified solvent diffusion method. The chemical structure and microstructure of the obtained PMCM was characterized by methods of Fourier transform infrared spectroscopy (FT-IR), optical microscopy, scanning electron microscopy and X-ACT energy dispersive X-ray spectroscopy. The SEM micrographs of the PMCM containing 21.6% of C, 46.8% of O, 10.7% of S and 19.4% of K was relatively smooth. Thermal stability, sustained release performance, and antimicrobial activity of PMCM were investigated. The results showed that the drug loading More >

Judith Constantino-Alcazar¹, Miguel Abud-Archila¹, Benjamín Valdez-Salas³, Federico Gutierrez-Miceli¹, Carlos Ceceña-Duran², Blanca López-Valenzuela², Daniel Gonzalez-Mendoza^2,*,*

Journal of Renewable Materials, Vol.9, No.10, pp. 1699-1706, 2021, DOI:10.32604/jrm.2021.015645 - 12 May 2021

Abstract In the present study, the green synthesis of potassium nanoparticles (K-NPs) was assessed using aqueous extract of Sideroxylon capiri. The potassium nanoparticles were analyzed by UV-visible spectroscopic techniques, X-ray spectrometers of energy dispersive (SEM-EDS) and dynamic light scattering. The results showed high values at 3.5 keV confirming the formation of potassium nanoparticles and the SEM analysis showed an agglomerated particles size between 360 to 200 nm with a spherical morphology. The K-NPs showed an effective antibacterial activity against the test organisms mainly with Bacillus cereus, Enterobacter aerogenes, Fusarium solani and Botrytis cinerea. However further studies about nanotoxicity of K-NPs are More >

Qingfang Lv¹, Tongchen Han¹, Ye Liu^2,*, Yi Ding¹, Yujie Lu¹

Journal of Renewable Materials, Vol.9, No.10, pp. 1757-1779, 2021, DOI:10.32604/jrm.2021.015536 - 12 May 2021

Abstract

Cross-laminated bamboo (CLB) have a high strength to weight ratio and stable bidirectional mechanical properties. Inspired by the investigation on cross-laminated timber (CLT) rocking walls, CLB rocking walls with conventional friction dampers (CFDs) are studied in this paper. To investigate the mechanical properties of the CLB rocking wall, seven tests are conducted under a cyclic loading scheme, and different test parameters, including the existence of the CFDs, the moment ratio, and the loading times, are discussed. The test results show a bilinear behavior of the CLB rocking wall. The small residual displacements of the CLB rocking

… More > Graphic Abstract

Sudhakar Muniyasamy^1,2,*, Asis Patnaik^3,*

Journal of Renewable Materials, Vol.9, No.10, pp. 1661-1671, 2021, DOI:10.32604/jrm.2021.014904 - 12 May 2021

Abstract Present study deals with the biodegradable behavior of individual components and their preforms of nonwoven biocomposites developed from waste wool fibers including coring wool (CW), dorper wool (DW) and recycled polyester fibers (RPET). A respirometric technique was employed to estimate the production of CO₂ during the biodegradation experiments under soil and aqueous media conditions. Functional groups of test samples before and after biodegradation were analyzed using Fourier transform infrared spectroscopy (FTIR). Leaching chemicals such as formaldehyde (hydrolyzed) and Chromium VI (Cr VI) was also measured. The CO₂ emission in wool fibers CW and DW indicated 90%… More >

Muhtar^*

Journal of Renewable Materials, Vol.9, No.9, pp. 1631-1646, 2021, DOI:10.32604/jrm.2021.015452 - 23 April 2021

Abstract This paper presents a method of measuring local slip in bamboo-reinforced concrete beams. Local slips (s_o) are calculated by reducing the elongation of the bamboo reinforcement (e_bo) with the elongation of the concrete (e_co). The elongation of bamboo reinforcement (e_bo) is determined in two ways, namely, read directly through a straingauge mounted on the bamboo reinforcement and calculated based on the force analysis or curvature moment as a control. The elongation of the concrete (e_co) is calculated using force analysis or curvature moment. The process of calculating curvature moments and bond stress employs the Excel program. The steps… More > Graphic Abstract

Elin Xiang^1,2, Shumin Yang^1,*, Chunjie Cao³, Xinge Liu¹, Guanyun Peng⁴, Lili Shang¹, Genlin Tian¹, Qianli Ma¹, Jianfeng Ma¹

Journal of Renewable Materials, Vol.9, No.9, pp. 1531-1540, 2021, DOI:10.32604/jrm.2021.015346 - 23 April 2021

Abstract In recent years, bamboo has been widely used in a broad range of applications, a thorough understanding of the structural characteristics of bamboo nodes is essential for better processing and manufacturing of biomimetic materials. This study investigated the complex anatomical structure for the nodes of two bamboo species, Indocalamus latifolius (Keng) McClure and Shibataea chinensis Nakai, using a high-resolution X-ray microtomography (μCT). The results show that the vascular bundle system in the nodal region of I. latifolius and S. chinensis is a net-like structure composed of horizontal and axial vascular bundles. Furthermore, the fiber sheath surrounding metaxylem vessels tended More >