L. Dong¹, S. N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol.83, No.2, pp. 183-220, 2012, DOI:10.32604/cmes.2012.083.183

Abstract In this paper, we develop T-Trefftz Voronoi Cell Finite Elements (VCF -EM-TTs) for micromechanical modeling of composite and porous materials. In addition to a homogenous matrix in each polygon-shaped element, three types of arbitrarily-shaped heterogeneities are considered in each element: an elastic inclusion, a rigid inclusion, or a void. In all of these three cases, an inter-element compatible displacement field is assumed along the element outer-boundary, and interior displacement fields in the matrix as well as in the inclusion are independently assumed as T-Trefftz trial functions. Characteristic lengths are used for each element to scale the T-Trefftz trial functions, in… More >

L. Dong¹, S. N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol.81, No.1, pp. 69-118, 2011, DOI:10.3970/cmes.2011.081.069

Abstract In this paper, we explore three different ways of developing T-Trefftz finite elements of quadrilateral as well as polygonal shapes. In all of these three approaches, in addition to assuming an inter-element compatible displacement field along the element boundary, an interior displacement field for each element is independently assumed as a linear combination of T-Trefftz trial functions. In addition, a characteristic length is defined for each element to scale the T-Trefftz modes, in order to avoid solving systems of ill-conditioned equations. The differences between these three approaches are that, the compatibility between the independently assumed fields at the boundary and… More >

S. Gerace¹, K. Erhart¹, E. Divo^1,2, A. Kassab¹

CMES-Computer Modeling in Engineering & Sciences, Vol.81, No.1, pp. 35-68, 2011, DOI:10.3970/cmes.2011.081.035

Abstract The focus of this work is to demonstrate a novel approach to true CFD automation based on an adaptive Cartesian point distribution process coupled with a Meshless flow solution algorithm. As Meshless method solutions require only an underlying nodal distribution, this approach works well even for complex flow geometries with non-aligned domain boundaries. Through the addition of a so-called shadow layer of body-fitted nodes, application of boundary conditions is simplified considerably, eliminating the stair-casing issues of typical Cartesian-based techniques. This paper describes the approach taken to automatically generate the Meshless nodal distribution, along with the details of an automatic local… More >

K.S. Kim¹, B.H. Lee², M.H. Kim¹, J.C. Park³

CMES-Computer Modeling in Engineering & Sciences, Vol.79, No.3&4, pp. 201-222, 2011, DOI:10.3970/cmes.2011.079.201

Abstract The coupling and interactions between vessel motion and inner-tank sloshing are investigated by a potential-CFD (Computational Fluid Dynamics) hybrid method in time domain. Potential-theory-based 3D diffraction/radiation panel program is used to obtain the hydrodynamic coefficients and wave forces for the simulation of vessel motion in time domain. The liquid sloshing in tanks is simulated in time domain by using the improved Moving Particle Simulation (PNU-MPS) method and it is validated through comparison against sloshing experiments. The calculated sloshing tank forces and moments are applied to the vessel-motion simulation as excitation forces and moments. The updated ship motion, which is influenced… More >

Alex Ferguson¹, Matthew R. Smith², J.-S. Wu³

CMES-Computer Modeling in Engineering & Sciences, Vol.63, No.1, pp. 79-100, 2010, DOI:10.3970/cmes.2010.063.079

Abstract A novel approach for the use of multiple continuous uniform distributions for reconstruction of the Maxwell-Boltzmann equilibrium probability distribution function is used for the solution of one and two dimensional Euler equations. The Uniform distribution Equilibrium Flux Method (UEFM) is a kinetic-theory based flux solver which calculates true directional, volume to volume fluxes based on integration (over velocity space and physical space) of a sum of uniform probability distribution functions working to approximate the equilibrium distribution function. The resulting flux expressions contain only the Heaviside unit step function and do not require the evaluation of the Exponential or Error Functions.… More >

I. Karagoz, F.Kaya

CMES-Computer Modeling in Engineering & Sciences, Vol.43, No.2, pp. 111-130, 2009, DOI:10.3970/cmes.2009.043.111

Abstract The aim of this work is to investigate the suitability of various turbulence models and their options for highly complex swirling flows in tangential inlet cyclones. Three-dimensional, steady governing equations for the incompressible, turbulent flow inside the cyclone are solved numerically. The prediction performance of three popular turbulence models and various options available for these models was evaluated by comparing the computed velocity profiles and pressure drop with the experimental data given in the literature. Results obtained from the numerical tests have demonstrated that the swirl factor for the RNG k-emodel has considerably influence on the prediction performance of the… More >

T.Z. Desta¹, G. De Bruyne¹, J.-M. Aerts¹, M. Baelmans², D. Berckmans¹

CMES-Computer Modeling in Engineering & Sciences, Vol.31, No.2, pp. 61-70, 2008, DOI:10.3970/cmes.2008.031.061

Abstract This paper demonstrates the use of the concept of the local mean age of air (LMAA) to quantify ventilation effectiveness under bicycle rider's safety helmets. The specific objective is to study the effect of helmet openings on the resulting ventilation effectiveness. To quantify ventilation effectiveness using the concept of LMAA, dynamic tracer gas data are necessary. The data were generated using a Computational Fluid Dynamics (CFD) model. Two bicycle helmet designs were used and compared with respect to ventilation performance. The result showed that the helmet with more openings had better performance especially at the back of the head. The… More >

T. Chekifi^1,2,*, B. Dennai², R. Khelfaoui²

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.3, pp. 201-212, 2018, DOI: 10.3970/fdmp.2018.00322

Abstract The fluidic oscillator is an interesting device developed for passive flow measurement. These microsystems can produce a high oscillating jet frequency with high flow velocity. The main advantages of fluidic oscillators are that no moving parts is included in the device. Commercial CFD code FLUENT was used to perform analysis of flows in fluidic oscillator. Numerical simulations were carried out for different flow conditions, where water and air were used as working fluids. The oscillation frequencies were identified by the discrete fast Fourier transform method (FFT). Furthermore a low-pressure vortex of fluid flow in the oscillating chamber was observed. The… More >

Fatiha Bentarzi¹, Amina Mataoui^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.2, pp. 107-120, 2018, DOI: 10.3970/fdmp.2018.06046

Abstract The dynamics of two fully developed turbulent jets, perpendicular to a heated flat plate and related heat transfer mechanism are analysed numerically. This problem is relevant to several thermal engineering applications. The governing equations are solved by a finite volume method with a second order RSM model combined with wall functions used for turbulent modelling. The possibility to improve heat transfer is assessed taking into account the characteristic parameters for the jet-wall interaction. In particular, a parametric study is conducted by varying the jet Reynolds number (Re) and the nozzle to plate distance (D). The distance between the two jets… More >

M. Dandani^1,*, V. Lepiller², A. Ghezal³, P. Desevaux⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.1, pp. 23-37, 2018, DOI:10.3970/fdmp.2018.014.023

Abstract The present study deals with the numerical visualization of the mixing process in a 2D supersonic ejector. The mixing process is visualized using two CFD flow visualization methods. The first method consists in introducing discrete particles in the secondary flow and computing their trajectories. The second method consists in modeling the diffusion of a passive scalar introduced in one of the two flows. The mixing process is investigated in the case of a conventional 2D supersonic ejector and a second case of an ejector equipped with transverse micro jets. Flow visualizations obtained show the existence of a significant mixing enhancement… More >