Ching-Chi Hsu¹, Jinn Lin², Yongyut Amaritsakul³, Takalamesar Antonius³, Ching-Kong Chao^3,4

CMC-Computers, Materials & Continua, Vol.11, No.1, pp. 1-14, 2009, DOI:10.3970/cmc.2009.011.001

Abstract Dynamic hip screw and gamma nail have been widely used to treat the patients with proximal femoral fractures, but clinical failures of those implants are still to be found. This study developed three-dimensional finite element models to investigate the biomechanical performances of the implants. Two kinds of commercially available implants (dynamic hip screw and gamma nail) and one newly designed implant (double screw nail) under three kinds of the proximal femoral fractures (neck fracture, subtrochanteric fracture, and subtrochanteric fracture with gap) were evaluated. Double screw nail showed better biomechanical performances than dynamic hip screw and gamma nail. Two commercially available… More >

CMC-Computers, Materials & Continua, Vol.10, No.1, pp. 65-96, 2009, DOI:10.3970/cmc.2009.010.065

Abstract This work proposed an alternative formulation for the prediction of martensite start temperature (Ms) of Fe-Mn-Si shape memory alloys (SMAs) depending on the various compositions and heat treatment techniques by using Neural Network (NN) and genetic programming (GP) soft computing techniques. The training and testing patterns of the proposed NN and GP formulations are based on well established experimental results from the literature. The NN and GP based formulation results are compared with experimental results and found to be quite reliable with a very high correlation (R2=0.955 for GEP and 0.999 for NN). More >

G. Haasemann¹, M. Kästner¹ and V. Ulbricht¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 131-146, 2006, DOI:10.3970/cmc.2006.003.131

Abstract Novel textile reinforced composites provide an extremely high adaptability and allow for the development of materials whose features can be adjusted precisely to certain applications. A successful structural and material design process requires an integrated simulation of the material behavior, the estimation of the effective properties which need to be assigned to the macroscopic model and the resulting features of the component. In this context two efficient modelling strategies - the Binary Model (Carter, Cox, and Fleck (1994)) and the Extended Finite Element Method (X-FEM) (Moës, Cloirec, Cartraud, and Remacle (2003)) - are used to model materials which exhibit a… More >

G. Mishuris¹, A. Öchsner², G. Kuhn³

CMC-Computers, Materials & Continua, Vol.2, No.4, pp. 227-238, 2005, DOI:10.3970/cmc.2005.002.227

Abstract FEM-evaluation of imperfect transmission conditions has been performed for a modelling problem of an elastic structure with a thin intermediate interface. Very good correlations with theoretical results have been obtained. Additionally, the possible error connected with introducing the transmission conditions instead of the intermediate zone has been estimated depending on mechanical properties of the zone. More >