LIJUN CHEN^*, ZHEQING GONG, ZHENGRONG FU

Journal of Polymer Materials, Vol.40, No.3-4, pp. 157-164, 2023, DOI:10.32381/JPM.2023.40.3-4.3

Abstract The organic fluorine modified/containing cationic acrylic resin is prepared via solution polymerization technique using hexafluorobutyl methacrylate (HFMA) along with butyl acrylate (BA), methyl methacrylate (MMA), styrene (St), dimethylaminoethyl methacrylate (DMAEMA) and hydroxy propyl methacrylate (HPMA) as the comonomers, proprylene glycol monomethyl ether (PGME) as the solvent, and 2, 2-Azo-bis-iso-butyronitrile (AIBN) as the initiator. The synthesized resin in which fluorine atom is introduced into the polymer chains. The cathodic electrodeposition (CED) coatings were prepared by mixing the synthesized resin and blocked isocyanate. The influence of the amount of organic fluorine on the resin and the resultant CED coatings is investigated in… More >

Chun Mao¹, Ji He^1,*, Xuefeng Wen¹, Yangzhou Xiang², Jihong Feng¹, Yingge Shu¹

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 487-502, 2024, DOI:10.32604/phyton.2024.048246

Abstract The contents of carbon (C), nitrogen (N), and phosphorus (P) in soil-microorganisms-plant significantly affect tea quality by altering the main quality components of tea, such as tea polyphenols, amino acids, and caffeine. However, few studies have quantified the effects of these factors on the main quality components of tea. The study aimed to explore the interactions of C, N, and P in soil-microorganisms-plants and the effects of these factors on the main quality components of tea by using the path analysis method. The results indicated that (1) The contents of C, N, and P in soil, microorganisms, and tea plants… More >

Kaiyue Hong, Yasmina Radani, Teja Manda, Jinhui Chen, Liming Yang^*

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 413-425, 2024, DOI:10.32604/phyton.2024.047739

Abstract This study explores CAMTA genes in the rare and endangered Chinese plant species, Liriodendron chinense. Despite the completion of whole-genome sequencing, the roles of CAMTA genes in calcium regulation and stress responses in this species remain largely unexplored. Within the L. chinense genome, we identified two CAMTA genes, Lchi09764 and Lchi222536, characterized by four functional domains: CG-1, TIG, ANK repeats, and IQ motifs. Our analyses, including phylogenetic investigations, cis-regulatory element analyses, and chromosomal location studies, aim to elucidate the defining features of CAMTA genes in L. chinense. Applying Weighted Gene Co-Expression Network Analysis (WGCNA), we explored the impact of CAMTA… More >

Rui Zhang¹, Taixiang Chen¹, Zhenjiang Chen¹, Hao Chen¹, Xuekai Wei¹, Malik Kamran¹, Chunjie Li^1,2,*

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 567-580, 2024, DOI:10.32604/phyton.2024.047485

Abstract In a greenhouse experiment, the effects of soil microorganisms and extracts of Achnatherum inebrians on the seed germination and seedling growth of Elymus nutans were studied. The results showed that both the extracts from aboveground and belowground parts of A. inebrians significantly inhibited the germination rate, germination potential, germination index, vigor index, seedling height, root length, and fresh weight of E. nutans, but increased malondialdehyde content, catalase, peroxidase and superoxide dismutase activity of E. nutans seedlings (p < 0.05). The allelopathy of aqueous extracts of the aboveground parts of A. inebrians was stronger than that of the precipitates. Aqueous extracts… More >

Mir Abdullatif Yahya¹, Fatma Tunali¹, Dilek Killi^2,*, Atalay Sökmen²

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 427-444, 2024, DOI:10.32604/phyton.2024.046271

Abstract An effective in vitro propagation protocol was designed for Lavandula angustifolia Miller, a medicinal aromatic plant that is a prominent source of volatile organic compounds (VOCs). Murashige and Skoog media were supplemented with various concentrations of Plant Growth Regulators (PGRs), and the growth parameters of the nodal segments were examined. Nodal explants formed callus when they were supplemented with 2 mg/L of 6-Benzylaminopurine (BAP). The superior hormonal concentration of Murashige and Skoog (MS) media for the proliferation of shoots from callus cultures (39.33%) was 5 mg/L of 2-Isopentenyl adenine (2iP), and the favorable media for the growth of L. angustifolia… More >

SUBRATA PAL^1,2, BHUVNESHWAR RAI¹, AJAY KUMAR TYAGI¹, SUNITA RATTAN², VIRENDRA KUMAR³

Journal of Polymer Materials, Vol.39, No.1-2, pp. 55-70, 2022, DOI:10.32381/JPM.2022.39.1-2.4

Abstract The present work is focused on the study of antimicrobial and water absorption properties of the surface of grafted rayon fiber with quaternary ammonium-based salts containing 3- Acrylamidopropyl trimethyl ammonium chloride (APTAC) monomer induced by gamma radiation. Grafting was qualitatively confirmed by FTIR-ATR,TGA, SEM and by calculating grafting yield and grafting efficiency. The performance was examined for water absorbency and antibacterial efficacy (R) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Study showed that water absorption, grafting yield and grafting efficiency increased steadily with the increase in monomer concentration and absorbed gamma irradiation dose up to a certain… More >

DIBYENDU S. BAG^*, SHILPI TIWARI, AKANSHA DIXIT, KM. MEENU

Journal of Polymer Materials, Vol.40, No.1-2, pp. 105-123, 2023, DOI:10.32381/JPM.2023.40.1-2.9

Abstract In this paper, we report the microstructural investigation and influence of H-bonding on the thermal behavior e.g., glass transition (T_g ) and thermal degradation of chiral copolymers of (R)- N-(1-phenyl-ethyl) methacrylamide (R-NPEMAM) and 2-hydroxy ethyl methacrylate (HEMA). The T_g increases with the increase of chiral unit content in the copolymers and then attains optimum at around 25 mole % of chiral content. Thereafter it decreases with the increase of chiral content. The effect of copolymer composition and secondary interaction associated with the Hbonding on the thermal properties of these copolymers was also studied. Secondary interaction, specifically H-bonding has been interpreted… More >

HADIMANI SHIVAKUMAR¹, GURUMURTHY G. D.¹, BOMMEGOWDA K. B.², S. PARAMESHWARA³

Journal of Polymer Materials, Vol.40, No.1-2, pp. 93-103, 2023, DOI:10.32381/JPM.2023.40.1-2.8

Abstract Polymer composites are increasing in demand in energy storage applications including in the electronic as well as electrical industries due to the ease of processing of these materials with associated advantages like light weight, corrosion resistance, and high mechanical strength. In this investigation, efforts are made to enhance the charging and discharging properties of epoxy/carbon fabric composite by the addition of graphene nanoplatelets (GNPs) into the epoxy/ carbon matrix. The performance of the composites with graphene platelets of 0.5 to 5 wt. % in epoxy were characterized and 1wt.% percolation threshold was observed poor performance in gravimetric charge and discharge… More >

SHIVA ARUN^a, VINAY KUMAR SINGH^a,#, PRABHA BHARTIYA^b, PRADIP KUMAR DUTTA^c,*

Journal of Polymer Materials, Vol.40, No.1-2, pp. 19-31, 2023, DOI:10.32381/JPM.2023.40.1-2.2

Abstract Biocompatible polymer chitosan has note-worthy applications in biomedical science. Nanohybrids synthesized by using chitosan as an encapsulating unit for polyoxometalates (POMs) and study of its biomedical applications is a fast-emerging field. In this research work, a lacunary polyoxometalate (α-K₈SiW₁₁O₃₉) has been synthesized and then alkylsilane has been inserted into its lacunary position. It has been then reacted with 2-hydroxy-1-naphtaldehyde followed by copper metalation and finally encapsulated into chitosan by using the ionotropic gelation technique, in which the chitosan and the POM served as cation and anion, respectively. The bands in UV-Vis spectra at characteristic wavelength indicate that the organosilane is… More >

Xiao Sun¹, Jiangbo Tong¹, Yuliang Zhang^2,*, Haibing Cai³, Wen Zhou⁴, Xiaoqi Jia⁵, Litao Ou⁶

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 725-737, 2024, DOI:10.32604/fdmp.2023.045541

Abstract Centrifugal pumps are widely used in the metallurgy, coal, and building sectors. In order to study the hydraulic characteristics of a closed impeller centrifugal pump during its shutdown in the so-called power frequency and frequency conversion modes, experiments were carried to determine the characteristic evolution of parameters such as speed, inlet and outlet pressure, head, flow rate and shaft power. A quasi-steady-state method was also used to further investigate these transient behaviors. The results show that, compared to the power frequency input, the performance parameter curves for the frequency conversion input are less volatile and smoother. The characteristic time is… More >