Chih-Wen Chang¹, Chein-Shan Liu², Jiang-Ren Chang³

CMC-Computers, Materials & Continua, Vol.15, No.1, pp. 45-66, 2010, DOI:10.3970/cmc.2010.015.045

Abstract In this article, we propose a semi-analytical method to tackle the two-dimensional backward heat conduction problem (BHCP) by using a quasi-boundary idea. First, the Fourier series expansion technique is employed to calculate the temperature field u(x, y, t) at any time t < T. Second, we consider a direct regularization by adding an extra termau(x, y, 0) to reach a second-kind Fredholm integral equation for u(x, y, 0). The termwise separable property of the kernel function permits us to obtain a closed-form regularized solution. Besides, a strategy to choose the regularization parameter is suggested. When several numerical examples were tested,… More >

J. Sladek¹, V. Sladek¹, P. Stanak¹, Ch. Zhang²

CMC-Computers, Materials & Continua, Vol.15, No.1, pp. 1-26, 2010, DOI:10.3970/cmc.2010.015.001

Abstract A meshless local Petrov-Galerkin (MLPG) method is applied to solve laminate plate problems described by the Reissner-Mindlin theory. Both stationary and transient dynamic loads are analyzed here. The bending moment and the shear force expressions are obtained by integration through the laminated plate for the considered constitutive equations in each lamina. The Reissner-Mindlin theory reduces the original three-dimensional (3-D) thick plate problem to a two-dimensional (2-D) problem. Nodal points are randomly distributed over the mean surface of the considered plate. Each node is the center of a circle surrounding this node. The weak-form on small subdomains with a Heaviside step… More >

Y.B. Zhang¹, A. Godfrey², D. Juul Jensen¹

CMC-Computers, Materials & Continua, Vol.14, No.3, pp. 197-208, 2009, DOI:10.3970/cmc.2009.014.197

Abstract Two methods to quantify protrusions/retrusions and to estimate local boundary curvature from sample plane sections are proposed. The methods are used to evaluate the driving force due to curvature of the protrusions/retrusions for partially recrystallized pure nickel cold rolled to 96% reduction in thickness. The results reveal that the values calculated by both these methods are reasonable when compared with the stored energy measured by differential scanning calorimetry. The relationship between protrusions and the average stored energy density in the deformed matrix is also investigated for partially recrystallized pure aluminum cold rolled to 50%. The results show that the local… More >

M.A.Arafin¹, J.A.Szpunar²

CMC-Computers, Materials & Continua, Vol.14, No.2, pp. 125-140, 2009, DOI:10.3970/cmc.2009.014.125

Abstract A novel microstructure, texture and grain boundary character based model has been proposed to simulate the intergranular crack propagation behavior in textured polycrystalline materials. The model utilizes the Voronoi algorithm and Monte Carlo simulations to construct the microstructure with desired grain shape factor, takes the texture description of the materials to assign the orientations of the grains, evaluates the grain boundary character based on the misorientation angle - axis calculated from the orientations of the neighboring grains, and takes into account the inclination of grain boundaries with respect to the external stress direction. Markov Chain theory has been applied to… More >

Xiaohua Hu¹, Gordana A. Cingara¹, David S. Wilkinson¹, Mukesh Jain², PeidongWu², Raja K. Mishra³

CMC-Computers, Materials & Continua, Vol.14, No.2, pp. 99-124, 2009, DOI:10.3970/cmc.2009.014.099

Abstract This work aims to understand the texture distribution in the localized necking band formed during uni-axial tension of AA5754 using an edge-constrained, plane strain post-necking FE model. The model domain is a long cross section of the band. Initial grain structure is mapped into the mesh from EBSD data using a modified Voroni-cell interpolation and considering pre-straining prior to localized necking. The material points in grains are assumed to exhibit isotropic elastoplastic behavior but have a relative strength in terms of Taylor factors which are updated by a Taylor-Bishop-Hill model. The predicted textures and gradients within the localized necking band… More >

Chih-Ping Wu^1,2, Shao-En Huang²

CMC-Computers, Materials & Continua, Vol.12, No.3, pp. 251-282, 2009, DOI:10.3970/cmc.2009.012.251

Abstract A modified Pagano method is developed for the three-dimensional (3D) coupled analysis of simply-supported, doubly curved functionally graded (FG) piezo-thermo-elastic shells under thermal loads. Four different loading conditions, applied on the lateral surfaces of the shells, are considered. The material properties of FG shells are regarded as heterogeneous through the thickness coordinate, and then specified to obey an exponent-law dependent on this. The Pagano method, conventionally used for the analysis of multilayered composite elastic plates/shells, is modified to be feasible for the present analysis of FG piezo-thermo-elastic plates/shells. The modifications include that a displacement-based formulation is replaced by a mixed… More >

Amiya K. Samanta¹, Somnath Ghosh²

CMC-Computers, Materials & Continua, Vol.12, No.1, pp. 1-38, 2009, DOI:10.3970/cmc.2009.012.001

Abstract This paper presents a formulation of hypo-elasticity based RC beam model with bond-slip. Details of the constitutive model and analysis method used are provided. A procedure has been described to carry out three-dimensional analysis considering both geometrical as well as material nonlinearity for a simply supported RC beam employing finite element technique, which uses 8-noded isoparametric hexahedral element HCiS18. Enhanced assumed strain (EAS) formulation has been utilized to predict load-deformation and internal stresses both in the elastic as well as nonlinear regime. It models the composite behaviour of concrete and reinforcements in rigid /perfect bond situation and their mutual interaction… More >

Gu, M. H.¹, Young, D. L.^1,2, Fan, C. M.¹

CMC-Computers, Materials & Continua, Vol.11, No.3, pp. 185-208, 2009, DOI:10.3970/cmc.2009.011.185

Abstract A meshless numerical algorithm is developed for the solutions of one-dimensional wave equations in this paper. The proposed numerical scheme is constructed by the Eulerian-Lagrangian method of fundamental solutions (ELMFS) together with the D'Alembert formulation. The D'Alembert formulation is used to avoid the difficulty to constitute the linear algebraic system by using the ELMFS in dealing with the initial conditions and time-evolution. Moreover the ELMFS based on the Eulerian-Lagrangian method (ELM) and the method of fundamental solutions (MFS) is a truly meshless and quadrature-free numerical method. In this proposed wave model, the one-dimensional wave equation is reduced to an implicit… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.11, No.1, pp. 15-32, 2009, DOI:10.3970/cmc.2009.011.015

Abstract Motivated by the evolutionary and dissipative properties of parabolic type partial differential equation (PDE), Liu (2008a) has proposed a natural and mathematically equivalent approach by transforming the quasilinear elliptic PDE into a parabolic one. However, the above paper only considered a rectangular domain in the plane, and did not treat the difficulty arisen from the quasilinear PDE defined in an arbitrary plane domain. In this paper we propose a new technique of internal and boundary residuals in a fictitious rectangular domain, which are driving forces for the ordinary differential equations based on the Fictitious Time Integration Method (FTIM). Several numerical… More >

J.H. Tian^1,2, X. Han², S.Y. Long³, G.Q. Xie⁴

CMC-Computers, Materials & Continua, Vol.10, No.3, pp. 229-242, 2009, DOI:10.3970/cmc.2009.010.229

Abstract A heat conduction analysis of the functionally graded material (FGM) plates has been investigated based on the hybrid numerical method (HNM). HNM combines the layer element method with the method of Fourier transforms and proves to be efficient and reliable. The FGM plates are infinite large and the material properties vary continuously through thickness. The heat source continually acted one the FGM plates. The temperature distribution of the FGM plates is obtained in different time and different position. Some useful results for heat conduction problems are shown in figures. This article applies HNM to heat conduction firstly and provides us… More >