Jihong Yan^1,2, Weihan Ni^1,*, Jianshu Zhai², Haiyang Dong¹

CMES-Computer Modeling in Engineering & Sciences, Vol.134, No.2, pp. 1337-1351, 2023, DOI:10.32604/cmes.2022.021567

Abstract Target detection is an important research content in the radar field. At present, efforts are being made to optimize the precision of detection information. In this paper, we use the high pulse repetition frequency (HPRF) transmission method and orthogonal biphase coded signals in each pulse to avoid velocity ambiguity and range ambiguity of radar detection. In addition, We also apply Walsh matrix and genetic algorithm (GA) to generate satisfying orthogonal biphase coded signals with low auto-correlation sidelobe peak and cross-correlation peak, which make the results more accurate. In a radar receiver, data rearrangement of echo signals is performed, and then… More >

Qi Zhou^1,2, Jinghua Li^1,3, Ruipu Dong^1,*, Qinghua Zhou^3,*, Boxin Yang³

CMES-Computer Modeling in Engineering & Sciences, Vol.134, No.2, pp. 1263-1281, 2023, DOI:10.32604/cmes.2022.020744

Abstract Offshore engineering construction projects are large and complex, having the characteristics of multiple execution modes and multiple resource constraints. Their complex internal scheduling processes can be regarded as resourceconstrained project scheduling problems (RCPSPs). To solve RCPSP problems in offshore engineering construction more rapidly, a hybrid genetic algorithm was established. To solve the defects of genetic algorithms, which easily fall into the local optimal solution, a local search operation was added to a genetic algorithm to defend the offspring after crossover/mutation. Then, an elitist strategy and adaptive operators were adopted to protect the generated optimal solutions, reduce the computation time and… More >

Hao Han, Wei Wang^*

CMES-Computer Modeling in Engineering & Sciences, Vol.134, No.2, pp. 1353-1370, 2023, DOI:10.32604/cmes.2022.021494

Abstract Accurate prediction of ship motion is very important for ensuring marine safety, weapon control, and aircraft carrier landing, etc. Ship motion is a complex time-varying nonlinear process which is affected by many factors. Time series analysis method and many machine learning methods such as neural networks, support vector machines regression (SVR) have been widely used in ship motion predictions. However, these single models have certain limitations, so this paper adopts a multi-model prediction method. First, ensemble empirical mode decomposition (EEMD) is used to remove noise in ship motion data. Then the random forest (RF) prediction model optimized by genetic algorithm… More >

T. Anand Kumar^1,*, M. Kaliamoorthy¹, I. Gerald Christopher Raj²

Intelligent Automation & Soft Computing, Vol.35, No.3, pp. 3081-3097, 2023, DOI:10.32604/iasc.2023.028769

Abstract This paper presents a unique voltage-raising topology for a single-phase seven-level inverter with triple output voltage gain using single input source and two switched capacitors. The output voltage has been boosted up to three times the value of input voltage by configuring the switched capacitors in series and parallel combinations which eliminates the use of additional step-up converters and transformers. The selective harmonic elimination (SHE) approach is used to remove the lower-order harmonics. The optimal switching angles for SHE is determined using the genetic algorithm. These switching angles are combined with a level-shifted pulse width modulation (PWM) technique for pulse… More >

Mariem Belhor^1,2,3, Adnen El-Amraoui^1,*, Abderrazak Jemai², François Delmotte¹

Computer Systems Science and Engineering, Vol.45, No.1, pp. 1-19, 2023, DOI:10.32604/csse.2023.029058

Abstract This research focuses on the home health care optimization problem that involves staff routing and scheduling problems. The considered problem is an extension of multiple travelling salesman problem. It consists of finding the shortest path for a set of caregivers visiting a set of patients at their homes in order to perform various tasks during a given horizon. Thus, a mixed-integer linear programming model is proposed to minimize the overall service time performed by all caregivers while respecting the workload balancing constraint. Nevertheless, when the time horizon become large, practical-sized instances become very difficult to solve in a reasonable computational… More >

M. Mythreyee^*, Dr A. Nalini

Computer Systems Science and Engineering, Vol.45, No.1, pp. 819-837, 2023, DOI:10.32604/csse.2023.028525

Abstract This work presents the smart grid system for distributed Renewable Energy Sources (RES) with control methods. The hybrid MicroGrids (MG) are trending in small-scale power systems that involve distributed generations, power storage, and various loads. RES of solar are implemented with boost converter using Maximum Power Point Tracking (MPPT) with perturb and observe technique to track the maximum power. Also, the wind system is designed by permanent magnet synchronous generator that includes boost converter with MPPT technique. The battery is also employed with a Direct Current (DC)-DC bidirectional converter, and has a state of charge. The MATLAB/Simulink Simscape software is… More >

Mohammad Reza Hajmohammadi¹, Javad Najafiyan¹, Giulio Lorenzini^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.1, pp. 233-244, 2023, DOI:10.32604/fdmp.2023.019763

Abstract In this study, three computational approaches for the optimization of a thermal conduction problem are critically compared. These include a Direct Method (DM), a Genetic Algorithm (GA), and a Pattern Search (PS) technique. The optimization aims to minimize the maximum temperature of a hot medium (a medium with uniform heat generation) using a constant amount of high conductivity materials (playing the role of fixed factor constraining the considered problem). The principal goal of this paper is to determine the most efficient and fastest option among the considered ones. It is shown that the examined three methods approximately lead to the… More >

Gürcan Çetin^*

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 4519-4539, 2022, DOI:10.32604/cmc.2022.031734

Abstract Recently, machine learning algorithms have been used in the detection and classification of network attacks. The performance of the algorithms has been evaluated by using benchmark network intrusion datasets such as DARPA98, KDD’99, NSL-KDD, UNSW-NB15, and Caida DDoS. However, these datasets have two major challenges: imbalanced data and high-dimensional data. Obtaining high accuracy for all attack types in the dataset allows for high accuracy in imbalanced datasets. On the other hand, having a large number of features increases the runtime load on the algorithms. A novel model is proposed in this paper to overcome these two concerns. The number of… More >

Nashwa Nageh¹, Ahmed Elshamy¹, Abdel Wahab Said Hassan¹, Mostafa Sami², Mustafa Abdul Salam^3,4,*

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5245-5268, 2022, DOI:10.32604/cmc.2022.030906

Abstract Team Formation (TF) is considered one of the most significant problems in computer science and optimization. TF is defined as forming the best team of experts in a social network to complete a task with least cost. Many real-world problems, such as task assignment, vehicle routing, nurse scheduling, resource allocation, and airline crew scheduling, are based on the TF problem. TF has been shown to be a Nondeterministic Polynomial time (NP) problem, and high-dimensional problem with several local optima that can be solved using efficient approximation algorithms. This paper proposes two improved swarm-based algorithms for solving team formation problem. The… More >

Mohit Agarwal^1,*, Shikha Gupta²

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 6103-6119, 2022, DOI:10.32604/cmc.2022.030778

Abstract Task scheduling in highly elastic and dynamic processing environments such as cloud computing have become the most discussed problem among researchers. Task scheduling algorithms are responsible for the allocation of the tasks among the computing resources for their execution, and an inefficient task scheduling algorithm results in under-or over-utilization of the resources, which in turn leads to degradation of the services. Therefore, in the proposed work, load balancing is considered as an important criterion for task scheduling in a cloud computing environment as it can help in reducing the overhead in the critical decision-oriented process. In this paper, we propose… More >