MUHAMAD SOFFI BIN MANDA^1,2, MOHD RUZAIMI BIN MAT REJAB¹, SHUKUR ABU HASSAN^3,4, MAT UZIR BIN WAHIT^3,4, JOSEPH SELVI BINOJ^5,*, BRIGHT BRAILSON MANSINGH⁶, SITI SAFARAH BINTI AMIRNUDDIN³, ALAMRY ALI⁷, KHENG LIM GOH^8,9, DIDIK NURHADIYANTO¹⁰

Journal of Polymer Materials, Vol.39, No.3-4, pp. 241-253, 2022, DOI:10.32381/JPM.2022.39.3-4.5

Abstract This study investigates the potential of Tin Slag Polymer Concrete (TSPC) strengthening through confinement using basalt fiber reinforced polymer (BFRP) and aramid fiber reinforced polymer (AFRP) confinement. TSPC short cylindrical column samples have been wrapped with BFRP and AFRP in a single layer (30 mm overlap) using Sikadur-330 epoxy and final samples were coded as TSPC-UC, TSPC-BF and TSPC-AF for unconfined, BFRP and AFRP for confined respectively. After curing for 30 days at room temperature, compressive test has been performed to know the strength, modulus, strain, fracture energy and failure modes of unconfined and confined TSPC. Test result shows that… More >

ARUN KUMAR M, JAYAKUMARI LS^*, RAMJI CHANDRAN

Journal of Polymer Materials, Vol.40, No.3-4, pp. 141-156, 2023, DOI:10.32381/JPM.2023.40.3-4.2

Abstract Nanocomposites are very important materials because it imparts superior properties than other composites with low level of filler loading. Styrene butadiene rubber (SBR) is a non-polar rubber which acts as an insulator and has low electrical conductivity. Graphene platelet nano-powder from 0.1 to 1.25 phr level is incorporated into SBR rubber in order to improve the electrical properties. Comparative studies on electrical and mechanical properties of styrene butadiene rubber with graphene platelet nano-powder (GPN) by varying the filler content are made. The incorporation of Graphene platelet nano-powder increases the electrical conductivity in styrene butadiene rubber. It has been observed that… More >

MARIA JENITA, LALITHAPRIYA U, SUKUMAR M^*

Journal of Polymer Materials, Vol.39, No.1-2, pp. 71-87, 2022, DOI:10.32381/JPM.2022.39.1-2.5

Abstract In this study, a multi-layered green polymer-based packaging composite assembled by active flavonoid Kaempferol grafted with starch-chitosan was prepared, and its characteristics and effect on meat storage, including physicochemical characteristics and antioxidant capacity, were analysed and evaluated at refrigeration conditions given four treatments: CON (control— without coating), SEC (with starch+chitin), P01 (with starch+chitin + 1% of Kaempferol) and P02 (with starch+chitin + 2% of Kaempferol). The addition of Kaempferol increased the antioxidant activity of meat and inhibited the lipid oxidation until day 24 upon migration effect; also improving meat acceptability. The Rancimat induction time confirmed the stability of both P01… More >

Xiufeng Zhu^1,2, Jingying Wang^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 671-692, 2024, DOI:10.32604/fdmp.2023.045260

Abstract

SR-AOP (sulfate radical advanced oxidation process) is a novel water treatment method able to eliminate refractory organic pollutants. Hydrodynamic cavitation (HC) is a novel green technology, that can effectively produce strong oxidizing sulfate radicals. This paper presents a comprehensive review of the research advancements in these fields and a critical discussion of the principal factors influencing HC-enhanced SR-AOP and the mechanisms of synergistic degradation. Furthermore, some insights into the industrial application of HC/PS are also provided. Current research shows that this technology is feasible at the laboratory stage, but its application on larger scales requires further understanding and exploration. In… More > Graphic Abstract

Shu-Chuan Chu¹, Xiaomeng Yang¹, Li Zhang², Václav Snášel³, Jeng-Shyang Pan^1,4,*

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3763-3786, 2024, DOI:10.32604/cmc.2024.048594

Abstract The Gannet Optimization Algorithm (GOA) and the Whale Optimization Algorithm (WOA) demonstrate strong performance; however, there remains room for improvement in convergence and practical applications. This study introduces a hybrid optimization algorithm, named the adaptive inertia weight whale optimization algorithm and gannet optimization algorithm (AIWGOA), which addresses challenges in enhancing handwritten documents. The hybrid strategy integrates the strengths of both algorithms, significantly enhancing their capabilities, whereas the adaptive parameter strategy mitigates the need for manual parameter setting. By amalgamating the hybrid strategy and parameter-adaptive approach, the Gannet Optimization Algorithm was refined to yield the AIWGOA. Through a performance analysis of… More >

Duy Quang Tran¹, Huy Q. Tran^2,*, Minh Van Nguyen³

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3585-3602, 2024, DOI:10.32604/cmc.2024.047760

Abstract With the advancement of artificial intelligence, traffic forecasting is gaining more and more interest in optimizing route planning and enhancing service quality. Traffic volume is an influential parameter for planning and operating traffic structures. This study proposed an improved ensemble-based deep learning method to solve traffic volume prediction problems. A set of optimal hyperparameters is also applied for the suggested approach to improve the performance of the learning process. The fusion of these methodologies aims to harness ensemble empirical mode decomposition’s capacity to discern complex traffic patterns and long short-term memory’s proficiency in learning temporal relationships. Firstly, a dataset for… More >

Fauziyah¹, Zhaoshun Wang^1,*, Mujahid Tabassum²

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 4417-4452, 2024, DOI:10.32604/cmc.2024.046797

Abstract In an era characterized by digital pervasiveness and rapidly expanding datasets, ensuring the integrity and reliability of information is paramount. As cyber threats evolve in complexity, traditional cryptographic methods face increasingly sophisticated challenges. This article initiates an exploration into these challenges, focusing on key exchanges (encompassing their variety and subtleties), scalability, and the time metrics associated with various cryptographic processes. We propose a novel cryptographic approach underpinned by theoretical frameworks and practical engineering. Central to this approach is a thorough analysis of the interplay between Confidentiality and Integrity, foundational pillars of information security. Our method employs a phased strategy, beginning… More >

Umar Rashid^1,2,*, Arfan Jaffar^1,2, Muhammad Rashid³, Mohammed S. Alshuhri⁴, Sheeraz Akram^1,4,5

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3377-3390, 2024, DOI:10.32604/cmc.2024.046320

Abstract Pulmonary nodules are small, round, or oval-shaped growths on the lungs. They can be benign (noncancerous) or malignant (cancerous). The size of a nodule can range from a few millimeters to a few centimeters in diameter. Nodules may be found during a chest X-ray or other imaging test for an unrelated health problem. In the proposed methodology pulmonary nodules can be classified into three stages. Firstly, a 2D histogram thresholding technique is used to identify volume segmentation. An ant colony optimization algorithm is used to determine the optimal threshold value. Secondly, geometrical features such as lines, arcs, extended arcs, and… More >

Ritesh Singh¹, Abhishek Gupta¹, Akshoy Ranjan Paul¹, Bireswar Paul¹, Suvash C. Saha^2,*

Energy Engineering, Vol.121, No.4, pp. 835-848, 2024, DOI:10.32604/ee.2024.046849

Abstract A parabolic trough solar collector (PTSC) converts solar radiation into thermal energy. However, low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants. Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid. The circular receiver pipe, with dimensions of 66 mm diameter, 2 mm thickness, and 24 m length, is exposed to uniform temperature and velocity conditions. The working fluid, Therminol-66, is supplemented with Fe₃O₄ magnetic nanoparticles at concentrations ranging from 1% to 4%. The findings demonstrate that the inclusion of nanoparticles increases the convective heat… More >

Calvin Hong Li^a, G. P. Peterson^b,*

Frontiers in Heat and Mass Transfer, Vol.1, No.2, pp. 1-10, 2010, DOI:10.5098/hmt.v1.2.3007

Abstract An experimental investigation of the Critical Heat Flux (CHF) and heat transfer coefficient (HTC) of two-phase heat transfer of de-Ionized (DI) water, pool boiling was conducted using several kinds of sintered copper microparticle porous uniform and modulated structures. The modulated porous structure reached a heat flux of 450 W/cm² and a heat transfer coefficient of 230,000 W/m2K. The thick and thin uniform porous structures achieved CHFs of 290 W/cm² and 227 W/cm² , respectively, and heat transfer coefficients of 118,000 W/m²K and 104,000 W/m²K. The mechanisms for the dramatically improved CHFs and HTCs were identified with assistance of a visualization… More >