LiviuMarin ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.37, No.3, pp. 203-242, 2008, DOI:10.3970/cmes.2008.037.203

Abstract In this paper, a meshless method for the stable solution of direct and inverse problems associated with the two-dimensional Laplace equation in the presence of boundary singularities and noisy boundary data is proposed. The governing equation and boundary conditions are discretized by the method of fundamental solutions (MFS), whilst the existence of the boundary singularity is taken into account by subtracting from the original MFS solution the corresponding singular solutions, as given by the asymptotic expansion of the solution near the singular point. However, even in the case when the boundary singularity is accounted for, the numerical solutions obtained by… More >

Chein-Shan Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.35, No.2, pp. 91-112, 2008, DOI:10.3970/cmes.2008.035.091

Abstract We consider the inverse Cauchy problems for Laplace equation in simply and doubly connected plane domains by recoverning the unknown boundary value on an inaccessible part of a noncircular contour from overspecified data. A modified Trefftz method is used directly to solve those problems with a simple collocation technique to determine unknown coefficients, which is named a modified collocation Trefftz method (MCTM). Because the condition number is small for the MCTM, we can apply it to numerically solve the inverse Cauchy problems without needing of an extra regularization, as that used in the solutions of direct problems for Laplace equation.… More >

Paola Gardano¹, Peter Dabnichki^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.15, No.2, pp. 87-98, 2006, DOI:10.3970/cmes.2006.015.087

Abstract The work presents a numerical simulation of hydrodynamic forces generated in front crawl swimming. The three dimensional Laplace's equation is used for the analysis of the flow around a moving body in an infinite domain and considers the effect of the added mass and the acceleration on the hydrodynamic forces (Drag and Lift) generated by the interaction between the flow and the body at different geometric configurations of the arm -- variable elbow angle. Boundary Element Method (BEM) was used to obtain the solution of the three dimensional equation numerically. The aim of the work was two-fold:
1) to… More >

Roman Chapko¹, B. Tomas Johansson²

CMES-Computer Modeling in Engineering & Sciences, Vol.85, No.2, pp. 105-128, 2012, DOI:10.3970/cmes.2012.085.105

Abstract We consider a Cauchy problem for the Laplace equation in a 3-dimen -sional semi-infinite domain that contains a bounded inclusion. The canonical situation is the upper half-space in I\tmspace -.1667em R3 containing a bounded smooth domain. The function value of the solution is specified throughout the plane bounding the upper half-space, and the normal derivative is given only on a finite portion of this plane. The aim is to reconstruct the solution on the surface of the bounded inclusion. This is a generalisation of the situation in Chapko and Johansson (2008) to three-dimensions and with Cauchy data only partially given.… More >

Liviu Marin¹

CMES-Computer Modeling in Engineering & Sciences, Vol.48, No.2, pp. 121-154, 2009, DOI:10.3970/cmes.2009.048.121

Abstract We investigate the numerical implementation of the alternating iterative algorithm originally proposed by ` 12 ` 12 `$12 `&12 `#12 `^12 `_12 `%12 `~12 *Kozlov91 in the case of the Cauchy problem for the two-dimensional Laplace equation using a meshless method. The two mixed, well-posed and direct problems corresponding to every iteration of the numerical procedure are solved using the method of fundamental solutions (MFS), in conjunction with the Tikhonov regularization method. For each direct problem considered, the optimal value of the regularization parameter is chosen according to the generalized cross-validation (GCV) criterion. An efficient regularizing stopping criterion which ceases… More >

Chih-Chang Chi¹, Weichung Yeih^1,2, Chein-Shan Liu³

CMES-Computer Modeling in Engineering & Sciences, Vol.47, No.2, pp. 167-190, 2009, DOI:10.3970/cmes.2009.047.167

Abstract In this study, a novel method for solving the Cauchy problem of Laplace equation is developed. Through the fictitious time integration method (FTIM), the finding of the root of the resulting linear equations can be transformed into for finding the fixed point of a system of first order ordinary differential equations, in which a fictitious time variable is introduced. In such a sense, the inverse of ill-posed leading matrix is not necessary for the FTIM. This method uses the residual of each equation to control the evolution of unknowns in the fictitious time, and it is different from the conventional… More >

Chein-Shan Liu¹, Weichung Yeih², Satya N. Atluri³

CMES-Computer Modeling in Engineering & Sciences, Vol.44, No.3, pp. 281-312, 2009, DOI:10.3970/cmes.2009.044.281

Abstract Here we develop a general purpose pre/post conditionerT, to solve an ill-posed system of linear equations,Ax=b. The conditionerTis obtained in the course of the solution of the Laplace equation, through a boundary-collocation Trefftz method, leading to:Ty=x, whereyis the vector of coefficients in the Trefftz expansion, andxis the boundary data at the discrete points on a unit circle. We show that the quality of the conditionerTis greatly enhanced by using multiple characteristic lengths (Multiple Length Scales) in the Trefftz expansion. We further show thatTcan be multiplicatively decomposed into a dilationTDand a rotationTR. For an odd-orderedA, we develop four conditioners based on… More >

D. L. Young^1,3, K. H. Chen², T. Y. Liu³, L. H. Shen³, C. S. Wu³

CMES-Computer Modeling in Engineering & Sciences, Vol.40, No.3, pp. 225-270, 2009, DOI:10.3970/cmes.2009.040.225

Abstract In this article, a hypersingular meshless method (HMM) is extended to solve 3D potential problems for arbitrary domains after a 2D model was successfully developed (Young et al. 2005a). The solutions are represented by a distribution of the double layer potentials instead of the single layer potentials as generally used in the conventional method of fundamental solutions (MFS). By using the desingularization technique to regularize the singularity and hypersingularity of the double layer potentials, the source points can be located exactly on the real boundary to avoid the sensitivity of locating fictitious boundary for putting the singularity outside the computational… More >

Chein-Shan Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.40, No.1, pp. 1-28, 2009, DOI:10.3970/cmes.2009.040.001

Abstract We consider an inverse problem of Laplace equation by recoverning boundary value on the inner circle of a two-dimensional annulus from the overdetermined data on the outer circle. The numerical results can be used to determine the Robin coefficient or crack's position inside a disk from the measurements of Cauchy data on the outer boundary. The Fourier series is used to formulate the first kind Fredholm integral equation for the unknown data f(θ) on the inner circle. Then we consider a Lavrentiev regularization, by adding an extra term αf(θ) to obtain the second kind Fredholm integral equation. The termwise separable… More >

Chein-Shan Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.33, No.2, pp. 179-198, 2008, DOI:10.3970/cmes.2008.033.179

Abstract Dirichlet boundary value problem of quasilinear elliptic equation is numerically solved by using a new concept of fictitious time integration method (FTIM). We introduce a fictitious time coordinate t by transforming the dependent variable u(x,y) into a new one by (1+t)u(x,y) =: v(x,y,t), such that the original equation is naturally and mathematically equivalently written as a quasilinear parabolic equation, including a viscous damping coefficient to enhance stability in the numerical integration of spatially semi-discretized equation as an ordinary differential equations set on grid points. Six examples of Laplace, Poisson, reaction diffusion, Helmholtz, the minimal surface, as well as the explosion… More >