CLAUDIA NOME^1*, PAULO CÉSAR MAGALHÃES², ELIZABETH OLIVEIRA², SERGIO NOME, IRMA GRACIELA LAGUNA¹

BIOCELL, Vol.33, No.2, pp. 133-136, 2009, DOI:10.32604/biocell.2009.33.133

Abstract Maize plants infected with Spiroplasma kunkelii show symptoms similar to that of plants in a magnesium-deficient soil, and it has been shown that the spiroplasma alters the plants’ magnesium absorption. In the current study we compared changes associated to either spiroplasma infection, two soil magnesium levels and their combinations. Plant symptoms were recorded and correlated with transmission electron microscopy observations. Plants grown on a high magnesium treatment showed no macroscopical alterations nor organelle ultrastructural alterations, while plants on a low magnesium treatment showed macroscopical vein yellowing and, ultrastructurally, they had most chloroplasts and mitochondrial membranes altered. Infected plants on a… More >

KARINA M. MICHETTI^1,2, PATRICIA I. LEONARDI^1,3, EDUARDO J. CÁCERES^1,4

BIOCELL, Vol.30, No.3, pp. 491-496, 2006, DOI:10.32604/biocell.2006.30.491

Abstract Nonspecific acid phosphatases are a group of enzymes whose activity increases the availability of exogenous and endogenous orthophosphate either through extra- or intracellular hydrolysis of phosphate compounds. Our study demonstrates the activity of acid phosphatases in the filamentous freshwater alga Stigeoclonium tenue. These enzymes were detected following a cerium-based method in which cerium was used as an orthophosphate-capture reagent. In thalli from S. tenue from the natural environment, acid phosphatases were found in the longitudinal cell wall, plasmalemma, and vacuole. In thalli from Bold’s Basal Medium culture, these enzymes were found mainly in the plasmalemma; they were scarce in the… More >

Hajiboland R^1,2, C Poschenrieder³

Phyton-International Journal of Experimental Botany, Vol.84, No.1, pp. 86-100, 2015, DOI:10.32604/phyton.2015.84.086

Abstract Under acid soil conditions, solubility of aluminum (Al) increases leading to toxicity for plants. Al accumulator species such as tea, however, accumulate high levels of Al in tissues without toxicity symptoms. In this work, Al localization and compartmentation were studied in tea [Camellia sinensis (L.) O. Kuntze] grown hydroponically at 0 or 100 µM Al for eight weeks. Plant dry matter production was significantly higher in the presence of Al and accumulated up to 1.21 and 6.18 mg Al/g DW in the leaves and roots, respectively. About 40-50% of Al was partitioned into cell wall (CW)-bound fraction without any difference… More >

CLAUDIA FERNANDA NOME¹ , SERGIO FERNANDO NOME² , FABIANA GUZMÁN¹ , LUIS CONCI¹, IRMA GRACIELA LAGUNA^1,2

BIOCELL, Vol.31, No.1, pp. 23-31, 2007, DOI:10.32604/biocell.2007.31.023

Abstract Among diseases reported worldwidely for sweet potato (Ipomoea batatas (L) Lam) crop, one of the most frequent is the Sweet potato virus disease (SPVD), caused by sweet potato chlorotic stunt virus (SPCSV) and sweet potato feathery mottle virus (SPFMV) co-infection. In Argentina, there exists the sweet potato chlorotic dwarf (SPCD), a sweet potato disease caused by triple co-infection with SPCSV, SPFMV and sweet potato mild speckling virus(SPMSV). Both diseases cause a synergism between the potyviruses(SPFMV and SPMSV) and the crinivirus (SPCSV). Up to date, studies carried out on the interaction among these three viruses have not described their localization in… More >

Changgeng Shuai^{1, 2}, Shike Zhang^{1, 2}, Jiaxuan Yang^{1, 2}, Sitong Zhou^{1, 2}

Sound & Vibration, Vol.52, No.4, pp. 2-5, 2018, DOI:10.32604/sv.2018.03724

Abstract Advanced array processing approaches require accurate knowledge of the location of individual element in a sensor array. Most array shape estimation methods require the directions of sources. In this paper, an array shape estimation method based on eigen-decomposition is presented. The directions of sources do not need to be considered in advance and optimal array shape is generated through a series of iterations. To further improve the accuracy of this algorithm, a partitioned eigenstructure method is introduced. Numerical simulations using non-partitioned and partitioned method are conducted to verify the performance of the proposed technique. More >

Jianliang Jiang¹, Bosun Xie^1,2,*, Haiming Mai¹

Sound & Vibration, Vol.53, No.1, pp. 25-36, 2019, DOI:10.32604/sv.2019.04259

Abstract Ambisonics is a series of spatial sound reproduction system based on spatial harmonics decomposition and each order approximation of sound field. Ambisonics signals are originally intended for loudspeakers reproduction. By using head-related transfer functions (HRTFs) filters, binaural Ambisonics converts the Ambisonics signals for static or dynamic headphone reproduction. In present work, the performances of static and dynamic binaural Ambisonics reproduction are evaluated and compared. The mean binaural pressure errors across target source directions are first analyzed. Then a virtual source localization experiment is conducted, and the localization performances are evaluated by analyzing the percentages of front-back and up-down confusion, the… More >

C. A. Bronkhorst^1,2, A. R. Ross³, B. L. Hansen¹, E. K. Cerreta², J. F. Bingert²

CMC-Computers, Materials & Continua, Vol.17, No.2, pp. 149-174, 2010, DOI:10.3970/cmc.2010.017.149

Abstract A common sample geometry used to study shear localization is the "tophat": an axi-symmetric sample with an upper "hat" portion and a lower "brim" portion. The gage section lies between the hat and brim. The gage section length is on the order of 0.9 mm with deformation imposed through a Split-Hopkinson Pressure Bar system at maximum top-to-bottom velocity in the range of 10-25 m/sec. Detailed metallographic analysis has been performed on sections of the samples to quantify the topology and deformation state of the material after large deformation shear. These experiments performed with polycrystalline tantalum have been modeled using a… More >

T.M. Hatem¹, M.A. Zikry¹

CMC-Computers, Materials & Continua, Vol.17, No.2, pp. 127-148, 2010, DOI:10.3970/cmc.2010.017.127

Abstract A three-dimensional multiple-slip dislocation-density-based crystalline formulation, and specialized finite-element formulations were used to investigate dislocation-density evolution and crack behavior in single-packet lath martensite in high strength martensitic steels. The formulation is based on accounting for variant morphologies and orientations, and initial dislocations-densities that are uniquely inherent to martensitic microstructures. The effects of loading plane with respect to the orientation o the habit plane are investigated. Furthermore, the formulation was used to investigate single-packet microstructure mapped directly from SEM/EBSD images of maraging and ausformed martensitic steel alloys. This analysis underscores that shear pipe effects in martensitic steels, where the long direction… More >

Soon Wan Chung¹, Yoo Jin Choi¹, Seung Jo Kim¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.6, pp. 707-718, 2003, DOI:10.3970/cmes.2003.004.707

Abstract In this paper, an automatic finite element remeshing algorithm based on the bubble packing method is utilized for the purpose of numerical simulations of localized damage, because fine meshes are needed to represent the gradually concentrated damage. The bubble packing method introduces two parameters that easily control the remeshing criterion and the new mesh size. The refined area is determined by \textit {a posteriori} error estimation utilizing the value obtained from Superconvergent Patch Recovery. The isotropic ductile damage theory, founded on continuum damage mechanics, is used for this damage analysis. It was successfully shown in the numerical examples (upsetting and… More >

Richard L.Martin

The International Conference on Computational & Experimental Engineering and Sciences, Vol.17, No.4, pp. 123-124, 2011, DOI:10.3970/icces.2011.017.123

Abstract The electronic structure of many of the oxides containing d- and f-elements has long been a challenge for theory. For example, the traditional workhorses of density functional theory, the local density approximation (LDA) and the generalized gradient approximations (GGA), predict most of these systems to be metallic, when in fact they are insulators with band gaps of several eV. These problems reflect the localization/delocalization dilemma faced in systems with weak overlap and seem to be largely overcome by the new generation of hybrid density functionals developed for molecular studies. Only recently has it been possible to apply these functionals to… More >