B. Pekmen^1,2, M. Tezer-Sezgin^2,3

CMES-Computer Modeling in Engineering & Sciences, Vol.96, No.4, pp. 275-292, 2013, DOI:10.3970/cmes.2013.096.275

Abstract The dual reciprocity boundary element method (DRBEM) formulation is presented for solving incompressible magnetohydrodynamic (MHD) flow equations. The combination of Navier-Stokes equations of fluid dynamics and Maxwell’s equations of electromagnetics through Ohm’s law is considered in terms of stream function, vorticity and magnetic potential in 2D. The velocity field and the induced magnetic field can be determined through the relations with stream function and magnetic potential, respectively. The numerical results are visualized for several values of Reynolds (Re), Hartmann (Ha) and magnetic Reynolds number (Rem) in a lid-driven cavity, and in a channel with a square cylinder. The well-known characteristics… More >

Ridha Djebali^1,2, Mohamed ElGanaoui³, Taoufik Naffouti¹

CMES-Computer Modeling in Engineering & Sciences, Vol.84, No.6, pp. 499-527, 2012, DOI:10.3970/cmes.2012.084.499

Abstract A thermal lattice Boltzmann model for incompressible flow is developed and extended to investigate the natural convection flow in porous media under the effect of uniform magnetic field. The study shows that the flow behaviour is various parameters dependent. The Rayleigh number (Ra), Hartmann number (Ha), Darcy number (Da) and the medium inclination angle from the horizontal (Φ), the magnetic field orientation (ψ) and the medium porosity (ε) effects are carried out in wide ranges encountered in industrial and engineering applications. It was found that the flow and temperature patterns change significantly when varying these parameters. To confirm the accuracy… More >

M. Dumbser¹, D.S. Balsara²

CMES-Computer Modeling in Engineering & Sciences, Vol.54, No.3, pp. 301-334, 2009, DOI:10.3970/cmes.2009.054.301

Abstract In this article we use the new, unified framework of high order one-step P_NP_M schemes recently proposed for inviscid hyperbolic conservation laws by Dumbser, Balsara, Toro, and Munz (2008) in order to solve the viscous and resistive magnetohydrodynamics (MHD) equations in two and three space dimensions on unstructured triangular and tetrahedral meshes. The P_NP_M framework uses piecewise polynomials of degree N to represent data in each cell and piecewise polynomials of degree M ≥ N to compute the fluxes and source terms. This new general machinery contains usual high order finite volume schemes (N = 0) and discontinuous Galerkin finite… More >

G. Venkata Ramana Reddy^1,*, Y. Hari Krishna¹

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.3, pp. 213-222, 2018, DOI: 10.3970/fdmp.2018.00411

Abstract The objective of the present problem is to investigate a two-dimensional unsteady flow of a viscous incompressible electrically conducting fluid over a stretching surface taking into account a transverse magnetic field of constant strength. Applying the similarity transformation, the governing boundary layer equations of the problem converted into nonlinear ordinary differential equations and then solved numerically using fourth order Runge-Kutta method with shooting technique. The effects of various parameters on the velocity and temperature fields as well as the skin-friction coefficient and Nusselt number are presented graphically and discussed qualitatively. More >

A. Khechiba¹, Y. Benakcha¹, A. Ghezal¹, P. Spetiri²

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.2, pp. 137-154, 2018, DOI: 10.3970/fdmp.2018.04054

Abstract This work investigates the dynamic behavior of a pulsatile flow electrically conducting through porous medium in a cylindrical conduit under the influence of a magnetic field. The imposed magnetic field is assumed to be uniform and constant. An exact solution of the equations governing magneto hydro-dynamics (MHD) flow in a conduit has been obtained in the form of Bessel functions. The analytical study has been used to establish an expression between the Hartmann number, Darcy number and the stress coefficient. The numerical method is based on an implicit finite difference time marching scheme using the Thomas algorithm and Gauss Seidel… More >

M. D. Shamshuddin^{1, *}, P. V. Satya Narayana²

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.1, pp. 57-86, 2018, DOI:10.3970/fdmp.2018.014.057

Abstract In the present paper, a numerical analysis is performed to study the primary and secondary flows of a micropolar fluid flow past an inclined plate with viscous dissipation and thermal radiation in a rotating frame. A uniform magnetic field of strength Bo is applied normal to the plane of the plate. The whole system rotates with uniform angular velocity about an axis normal to the plate. The governing partial differential equations are transformed into coupled nonlinear partial differential equations by using the appropriate dimensionless quantities. The resulting equations are then solved by the Galerkin finite element method. The influencing pertinent… More >

Bouchmel Mliki, Mohamed Ammar Abbassi, Ahmed Omri

FDMP-Fluid Dynamics & Materials Processing, Vol.11, No.1, pp. 87-114, 2015, DOI:10.3970/fdmp.2015.011.087

Abstract MHD double-diffusive natural convective flow in a C-shaped enclosure filled with a Cu/Water nanofluid is investigated numerically using the Lattice Boltzmann Method (LBM). Much care is devoted to the validation of the numerical code. The effects exerted on the flow, concentration and temperature fields by different parameters such as the Rayleigh number (10³−10⁶), the nanoparticle volume concentration (0−0,1), the Lewis number (1-5), the Hartmann number (0−30) and different types of nanoparticles (Cu, Ag, Al₂O₃ and TiO₃ are assessed in detail. Results for stream function, Nusselt and Sherwood numbers are presented and discussed for various parametric conditions. Results indicate that the… More >