Mohammed Albuaymi¹, Suleiman Abdulrahman^2,3, Fayez Alanazi⁴, Hani Alanazi^1,*, Musa Adamu^5,6

Journal of Renewable Materials, Vol.11, No.5, pp. 2433-2451, 2023, DOI:10.32604/jrm.2023.026751

Abstract Pure bitumen is not suitable for heavy traffic loads; hence modifiers are used to improve the bitumen performance. Recently, cup lump rubber (CLR) has become a preferred modifier due to its outstanding performance and less cost. However, little is known about the interactions between CLR and bitumen. Thus, this study investigates the behavior of bitumen with CLR. Four percentages of CLR (2.5%, 5.0%, 7.5%, and 10.0% by weight of bitumen) were used to modify conventional 60/70 penetration grade bitumen. The modified bitumen was evaluated through different laboratory testing such as dynamic shear rheometer, rotational viscosity, softening point, bending beam rheometer,… More >

A. K. M. Golam Sarwar¹, Md. Sabibul Haque^1,*, Md. Ekramul Haque², Md. Amir Hossain³, Md. Golam Azam⁴, Md. Nesar Uddin¹, Eldessoky S. Dessoky⁵, Mahmoud A. Basry⁶, Md. Alamgir Hossain¹

Phyton-International Journal of Experimental Botany, Vol.91, No.8, pp. 1721-1743, 2022, DOI:10.32604/phyton.2022.021069

Abstract Linseed is a multipurpose crop and the crop needs further improvement to increase production and yield due to its high value and demand. This study aimed to assess the extent and pattern of genetic variability of forty linseed genotypes based on diverse agro–morphological and yield attributes. The field experiment was conducted following a Randomized Complete Block Design with three replications. Linseed germplasm showed a wide range of phenotypic expression, genetic variability and heritability for 30 studied traits. A low to high phenotypic coeffi- cient of variation (PCV) and genotypic coefficient of variation (GCV) were observed. The lowest genotypic (σ² g)… More >

MADE DIOUF¹, SARA DIALLO¹, FRANÇOIS ABAYE BADIANE^1,2, OUMAR DIACK¹, DIAGA DIOUF^1,*

BIOCELL, Vol.45, No.2, pp. 345-362, 2021, DOI: 10.32604/biocell.2021.013706

Abstract Cowpea is one of the most important legume grains in the sub-Saharan region of Africa used for human consumption and animal feed, but its production is hampered by biotic and abiotic constraints raising the need to broaden its genetic basis. For this purpose, seeds of two cowpea varieties Melakh and Yacine were irradiated with 300 and 340 Gy of gamma-ray, respectively. The developed mutant populations were agromorphologically characterized from M5 to M7, while the genetic diversity of the latter was evaluated using 13 ISSR markers. Based on the agromorphological characterization, variation of flower color, pod length, seed coat color, and… More >

Avendaño-Arrazate CH¹, L Iracheta-Donjuan¹, JC Gódinez-Aguilar², P López-Gómez¹, A Barrios-Ayala³

Phyton-International Journal of Experimental Botany, Vol.84, No.1, pp. 148-162, 2015, DOI:10.32604/phyton.2015.84.148

Abstract The agave papalote (Agave cupreata Trelease) which is endemic to the Guerrero state, Mexico, is propagated exclusively by seed, but it is overutilized and knowledge of its diversity is needed for its protection. Therefore, the study aimed to determine the morphological variation in wild and cultivated populations of Agave cupreata in five areas of Guerrero. Ninety one characters were evaluated in situ, and only 51 qualitative and quantitative morphological characters of the plant, leaf spine, flower, fruit, seed and flower stalk were selected. The work was carried out in five different altitudinal zones, according to the level of production of… More >

Gálvez Muñoz YA¹, E Martínez Moreno², S Ramírez Vera², L Latournerie Moreno³, JM Lesher Gordillo¹, G Castañón Nájera^1*

Phyton-International Journal of Experimental Botany, Vol.87, pp. 60-67, 2018, DOI:10.32604/phyton.2018.87.060

Abstract The research was conducted with the aim to identify the variability in situ of wild and semi-wild morphotypes of Capsicum spp. that were found growing in different places of Tabasco and the north of Chiapas States. Morphotypes included “Amashito” (five types), “Pico de paloma” (two types), “Garbanzo”, “Ojo de sapo”, “Ojo de cangrejo”, “Colmillo de lagarto” and “Corazón de pollo”. Such characterization is important because there is an extensive variability of forms cultivated in the country, resulting from a wide range of agroecological diversity as well as diverse forms, colours, flavors and sizes that constitute a valuable collection of genes… More >

Gustavo P. Petrechen^1,4,*, Marcos Arduin³, José D. Ambrósio^1,2

Journal of Renewable Materials, Vol.7, No.7, pp. 683-692, 2019, DOI:10.32604/jrm.2019.04588

Abstract This article presents the overall morphological structure of the Brazil nut tree (Bertholletia excelsa) fruit pericarp, from macro to nano scale. The acquired knowledge would be used for the development of new applications, like using the materials as fillers for biocomposites, or as a hierarchical architecture model for biomimetics. This research was performed using stereo and light microscopy and conventional and force field emission scanning electron microscopy. The pericarp presents three layers: the exocarp, a dark gray, brittle and fragile outer layer; the mesocarp, a beige, dry, rigid, impermeable and fibrous intermediate layer; and the endocarp, an inner layer with… More >

G. Mondragon, C. Peña-Rodriguez, A. Eceiza, A. Arbelaiz^*

Journal of Renewable Materials, Vol.5, No.5, pp. 345-356, 2017, DOI:10.7569/JRM.2017.634124

Abstract In this work, the main chemical reactions conditions of a succession of specific chemical treatments used for the isolation of nanocellulose from sisal fibers were evaluated. The novelty of this work is the study done to analyze the effect of different reaction conditions (time or concentration) in fiber structure and composition as well as in the characteristics of obtained cellulosic samples. In order to achieve this goal different physicochemical, thermal and morphological characterization techniques were used after each chemical treatment and the most suitable reaction conditions were selected for the subsequent treatment. Moreover, the thermal stability evolution of cellulose nanocrystals… More >

D. Puglia^1*, F. Dominici¹, M. Badalotti², C. Santulli³, J.M. Kenny¹

Journal of Renewable Materials, Vol.4, No.3, pp. 199-205, 2016, DOI:10.7569/JRM.2016.634102

Abstract In this work, cocoa bean shells (CBS), which were ground, then sieved to less than 150 μm and dried in a vacuum oven, have been introduced in a polycaprolactone (PCL) matrix in three different amounts, 10, 20 and 30% wt. The obtained composites were tested under tensile loading, which indicated an enhanced rigidity with a slight decrease of strength with respect to the neat polymer and a reduced elongation, particularly evident for composites with 30 wt% CBS, where final collapse took place for strains only slightly exceeding the yielding point. Differential scanning calorimetry (DSC) indicated a rather negligible variation of… More >