S. Hartmann¹, R. Weyler², J. Oliver¹, J.C. Cante², J.A. Hernández¹

CMES-Computer Modeling in Engineering & Sciences, Vol.55, No.3, pp. 211-270, 2010, DOI:10.3970/cmes.2010.055.211

Abstract This work describes a three-dimensional contact domain method for large deformation frictionless contact problems. Theoretical basis and numerical aspects of this specific contact method are given in [Oliver, Hartmann, Cante, Weyler and Hernández (2009)] and [Hartmann, Oliver, Weyler, Cante and Hernández (2009)] for two-dimensional, large deformation frictional contact problems. In this method, in contrast to many other contact formulations, the necessary contact constraints are formulated on a so-called contact domain, which can be interpreted as a fictive intermediate region connecting the potential contact surfaces of the deformable bodies. This contact domain has the same dimension as the contacting bodies. It… More >

L. Parussini¹, V. Pediroda²

CMES-Computer Modeling in Engineering & Sciences, Vol.22, No.1, pp. 41-64, 2007, DOI:10.3970/cmes.2007.022.041

Abstract In this paper the Non-Intrusive Polynomial Chaos Method coupled to a Fictitious Domain approach has been applied to one- and two-dimensional elliptic problems with geometric uncertainties, in order to demonstrate the accuracy and convergence of the methodology. The main advantage of non-intrusive formulation is that existing deterministic solvers can be used. A new Least-Squares Spectral Element method has been employed for the analysis of deterministic differential problems obtained by Non-Intrusive Polynomial Chaos. This algorithm employs a Fictitious Domain approach and for this reason its main advantage lies in the fact that only a Cartesian mesh needs to be generated. Excellent… More >

L. Parussini ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.17, No.2, pp. 95-114, 2007, DOI:10.3970/cmes.2007.017.095

Abstract We propose a fictitious domain method combined with spectral/hp elements for the solution of second-order differential problems. This paper presents the formulation, validation and application of fictitiuos domain-spectral/hp element algorithm to one- and two-dimensional Poisson problems. Fictitious domain methods allow problems formulated on an intricate domain Ω to be solved on a simpler domain Π containing Ω. The Poisson equation, extended to the new domain Π, is expressed as an equivalent set of first-order equations by introducing the gradient as an additional indipendent variable, and spectral/hp element method is used to develop the discrete model. Convergence of relative energy norm… More >

U. Andreaus^1,3, R.C. Batra², M. Porfiri^{2, 3}

CMES-Computer Modeling in Engineering & Sciences, Vol.9, No.2, pp. 111-132, 2005, DOI:10.3970/cmes.2005.009.111

Abstract Structural health monitoring techniques based on vibration data have received increasing attention in recent years. Since the measured modal characteristics and the transient motion of a beam exhibit low sensitivity to damage, numerical techniques for accurately computing vibration characteristics are needed. Here we use a Meshless Local Petrov-Galerkin (MLPG) method to analyze vibrations of a beam with multiple cracks. The trial and the test functions are constructed using the Generalized Moving Least Squares (GMLS) approximation. The smoothness of the GMLS basis functions requires the use of special techniques to account for the slope discontinuities at the crack locations. Therefore, a… More >

B. Madani¹, F. Topin², L. Tadrist²

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.4, pp. 351-368, 2010, DOI:10.3970/fdmp.2010.006.351

Abstract The present work deals with the hydraulic characterization of two-phase flow with phase change in a channel filled with metallic foam. We provide a general presentation of metallic foams including morphological characteristics, fabrication processes and industrial applications. The experimental facility, which consists of a hydrodynamic loop, the test section, measurement devices, and the data acquisition system, is presented. The Metallic foam sample tested in the present work is manufactured by SCPS (French manufacturer). N-pentane is used as a coolant fluid. The mass velocity values lie between 4 and 49 kg/ m2s, while the heating power in the test section ranges… More >

R. Praveena¹, S. Nirmala²

CMC-Computers, Materials & Continua, Vol.53, No.1, pp. 37-47, 2017, DOI:10.3970/cmc.2017.053.039

Abstract DSP operation in a Biomedical related therapeutic hardware need to be performed with high accuracy and with high speed. Portable DSP hardware’s like pulse/heart beat detectors must perform with reduced operational power due to lack of conventional power sources. This work proposes a hybrid biomedical hardware chip in which the speed and power utilization factors are greatly improved. Multipliers are the core operational unit of any DSP SoC. This work proposes a LUT based unsigned multiplication which is proven to be efficient in terms of high operating speed. For n bit input multiplication n*n memory array of 2n bit size… More >