ABDUL KALAM AZAD¹, ARVIND GUPTA³, LAKSHMI UNNIKRISHNAN^2,3,*, SMITA MOHANTY³， SANJAY KUMAR NAYAK^2,3

Journal of Polymer Materials, Vol.38, No.1-2, pp. 121-136, 2021, DOI:10.32381/JPM.2021.38.1-2.10

Abstract Proton conducting hydrophilic channels were created successfully in poly (ether ether ketone) (PEEK) by means of step by step modification followed by the optimization of sulfonation process (SPEEK70, DS=68.57%). Although highly sulfonated PEEK has excellent proton conductivity, it lacks in mechanical stability due to low swelling degree. Therefore, a potential method has been proposed in this work by integrating poly (sulfone) and nanosilica (SiO₂ ) into SPEEK matrix. SPEEK 70 (S) was utilized to prepare blended nanocomposite membranes for further enhancement of hydrophilic channels. The blended nanocomposite membranes are, SPEEK/SiO₂ as SNS, SPEEK blended with poly (sulfone) as SP, SPEEK… More >

ARUN KUMAR M, JAYAKUMARI LS^*, RAMJI CHANDRAN

Journal of Polymer Materials, Vol.40, No.3-4, pp. 141-156, 2023, DOI:10.32381/JPM.2023.40.3-4.2

Abstract Nanocomposites are very important materials because it imparts superior properties than other composites with low level of filler loading. Styrene butadiene rubber (SBR) is a non-polar rubber which acts as an insulator and has low electrical conductivity. Graphene platelet nano-powder from 0.1 to 1.25 phr level is incorporated into SBR rubber in order to improve the electrical properties. Comparative studies on electrical and mechanical properties of styrene butadiene rubber with graphene platelet nano-powder (GPN) by varying the filler content are made. The incorporation of Graphene platelet nano-powder increases the electrical conductivity in styrene butadiene rubber. It has been observed that… More >

NURUL HAYATI YUSOF^1,*, DAZYLAH DARJI¹, TAN KIM SONG¹, NGHIEM THI THUONG²

Journal of Polymer Materials, Vol.39, No.1-2, pp. 151-166, 2022, DOI:10.32381/JPM.2022.39.1-2.10

Abstract In this work, a pure gum mould made of prevulcanized natural rubber/cloisite-Na⁺ nanocomposite (PVNR/CN) was prepared and characterized for ornament application. The suitable conditions to prepare PVNR/CN latex mixtures and the properties of the resulting PVNR/CN nanocomposites were investigated. The optimum CN concentration in the latex mixture was 1.0 phr, with the properties of 60 wt% total solid content, more than 600 sec mechanical stability time, lower than 350 cP Brookfield viscosity, and pH 10. The properties of PVNR/CN nanocomposite showed high strength, moderate hardness, and good thermal stability. The morphology by TEM showed well dispersion of CN particles in… More >

S. ARULMURUGAN^a,*, N. VENKATESHWARAN^a, S. KUMAR^a, P. CHANDRASEKAR^a

Journal of Polymer Materials, Vol.40, No.1-2, pp. 83-91, 2023, DOI:10.32381/JPM.2023.40.1-2.7

Abstract In this research, the effect of UV light on the mechanical properties of jute polymer nanocomposites was evaluated. Due to the fact that photodegradation is a surface process and is confined to the degradation of the mechanical characteristics of polyester resin, this study focuses on the resin quality. Therefore, test samples comprised of fibre-reinforced polyester nanoclay composites were fabricated different weight ratios of nanoclay. They were put through UV exposure in an Ultraviolet (UV) chamber. Tensile testing samples were made in accordance with ASTMD638 and had a minimum thickness of 3 mm. Additionally, specimens for Flexural and Impact testing were… More >

R. J. Johnson^∗, R. Pitchumani^†

Frontiers in Heat and Mass Transfer, Vol.1, No.1, pp. 1-9, 2010, DOI:10.5098/hmt.v1.1.3007

Abstract Much research is currently being performed with carbon nanotube additives to neat resin systems to enhance properties such as thermal and electrical conductivity, strength, modulus and damping. Fabrication of parts based on carbon nanotube filled resin systems requires information on their cure kinetics and rheology, which has been relatively less studied so far. This work presents an extensive experimental study that systematically characterizes the cure kinetics and viscosity as a function of degree of cure and temperature of EPON 815C/EPICURE 3274 epoxy resin system laden with carbon nanotubes. Studies are conducted to determine the effects of the carbon nanotube loading… More >

LEI LIU¹, NA GUO¹, XIANGLING LI², QIAN XU², RUILONG HE³, LIMIN CHENG⁴, CHUNYAN DANG³, XINYU BAI³, YIYING BAI³, XIN WANG³, QIANHUI CHEN³, LI ZHANG^3,*

Oncology Research, Vol.32, No.4, pp. 643-658, 2024, DOI:10.32604/or.2023.044491

Abstract The platinum-based chemotherapy is one of the most frequently used treatment protocols for lung adenocarcinoma (LUAD), and chemoresistance, however, usually results in treatment failure and limits its application in the clinic. It has been shown that microRNAs (miRNAs) play a significant role in tumor chemoresistance. In this study, miR-125b was identified as a specific cisplatin (DDP)-resistant gene in LUAD, as indicated by the bioinformatics analysis and the real-time quantitative PCR assay. The decreased serum level of miR-125b in LUAD patients was correlated with the poor treatment response rate and short survival time. MiR-125b decreased the A549/DDP proliferation, and the multiple… More >

HYUNG SUN KIM^1,#, YUN SUN LEE^2,#, SEUNG MYUNG DONG³, HYO JUNG KIM¹, DA EUN LEE², HYEON WOONG KANG², MYEONG JIN KIM², JOON SEONG PARK^1,*

Oncology Research, Vol.32, No.4, pp. 615-624, 2024, DOI:10.32604/or.2024.044029

Abstract Pancreatic ductal adenocarcinoma (PDAC) is one of the most aggressive solid malignancies. A specific mechanism of its metastasis has not been established. In this study, we investigated whether Neural Wiskott-Aldrich syndrome protein (N-WASP) plays a role in distant metastasis of PDAC. We found that N-WASP is markedly expressed in clinical patients with PDAC. Clinical analysis showed a notably more distant metastatic pattern in the N-WASP-high group compared to the N-WASP-low group. N-WASP was noted to be a novel mediator of epithelial-mesenchymal transition (EMT) via gene expression profile studies. Knockdown of N-WASP in pancreatic cancer cells significantly inhibited cell invasion, migration,… More > Graphic Abstract

Hai Trieu Phan^b, Nadia Caney^a,†, Philippe Marty^a, Stéphane Colasson^b, Jérôme Gavillet^b

Frontiers in Heat and Mass Transfer, Vol.2, No.1, pp. 1-6, 2011, DOI:10.5098/hmt.v2.1.3002

Abstract Experiments were performed to study the effects of surface wettability on flow boiling of water at atmospheric pressure. The test channel is a single rectangular channel 0.5 mm high, 5 mm wide and 180 mm long. The mass flux was set at 100 and 120 kg/m² s and the base heat flux was varied from 30 to 80 kW/m². Water enters the test channel under subcooled conditions. The sample surfaces are titanium (Ti) and diamond-like carbon (DLC) surfaces having a contact angle of 49° and 63°, respectively. The experimental results show different flow patterns that impact the heat transfer significantly.… More >

HONGMIN CAO^1,#,*, YING XUE^2,#, FEI WANG¹, GUANGYAO LI¹, YULAN ZHEN¹, JINGWEN GUO¹

BIOCELL, Vol.48, No.3, pp. 473-490, 2024, DOI:10.32604/biocell.2024.048946

Abstract Background: Cytotoxic T lymphocytes (CD8+ T) cells function critically in mediating anti-tumor immune response in cancer patients. Characterizing the specific functions of CD8+ T cells in lung adenocarcinoma (LUAD) could help better understand local anti-tumor immune responses and estimate the effect of immunotherapy. Methods: Gens related to CD8+ T cells were identified by cluster analysis based on the single-cell sequencing data of three LUAD tissues and their paired normal tissues. Weighted gene co-expression network analysis (WGCNA), consensus clustering, differential expression analysis, least absolute shrinkage and selection operator (LASSO) and Cox regression analysis were conducted to classify molecular subtypes for LUAD… More > Graphic Abstract

Flavia Oliveira Monteiro da Silva Abreu^1,2,*, Taysse Holanda¹, Joice Farias do Nascimento¹, Henety Nascimento Pinheiro¹, Rachel Menezes Castelo¹, Hélcio Silva dos Santos³, Thais Benincá⁴, Patrícia da Silva Malheiros⁴, Júlio César Sousa Prado⁵, Raquel de Oliveira Fontenelle⁵, Maria Madalena de Camargo Forte²

Journal of Renewable Materials, Vol.12, No.2, pp. 285-304, 2024, DOI:10.32604/jrm.2023.043919

Abstract With the increase in antimicrobial resistance, it has become necessary to explore alternative approaches for combating and preventing diseases. DB-cinnamaldehyde (CNM) and Benzyl4-amino (B4AM) are bioactive compounds derived from chalcones but with restricted solubility in aqueous media. Nanoemulsions can enhance the solubility of compounds and can be a promising alternative in the development of novel antimicrobials, with reduced side effects and prolonged release. The objective of this study was to evaluate the stability of oil-in-water nanoemulsions loaded with two distinct types of chalcones at two different dosages, to propose a stable formulation with antimicrobial properties. Results showed that nanoemulsions presented… More > Graphic Abstract