R.M. MISHRAA, R. VIJAYVARGIYAA, K.N. PANDEYA, J.S.P. RAIB

Journal of Polymer Materials, Vol.37, No.3-4, pp. 179-188, 2020, DOI:10.32381/JPM.2020.37.3-4.5

Abstract The present investigation is targeted to prepare nanocomposites based on binary blends of polyetherimide (PEI)-silicone rubber incorporated with varied loadings of nanotitanium dioxide particles. Nanocomposites have been prepared by melt blending process using twin screw extruder. Thermal properties of the developed nanocomposites have been investigated with the help of thermogravimetric analyzer (TGA) and dynamic mechanical analyzer (DMA). Scanning electron microscopy (SEM) is used to analyze the morphological properties of the nanocomposites. Mechanical properties (tensile strength, tensile modulus, elongation at break, impact strength) of the nanocomposites have been evaluated by universal testing machine (UTM). Mechanical testing results reveal that there is… More >

ANIL KUMAR VEERAPANENI¹, CHANDRASEKAR KUPPAN^2,*, MURTHY CHAVALI^3,*

Journal of Polymer Materials, Vol.37, No.3-4, pp. 121-130, 2020, DOI:10.32381/JPM.2020.37.3-4.1

Abstract The mechanical properties of hybrid nanocomposites made of epoxy/glass fibre dispersed with nano-α-Al₂ O₃ powder at different weight percentages were studied.The effect of nano-α- Al₂O₃ size and wt% on mechanical properties like tensile, flexural, interlaminar shear stress and hardness enhanced because of their higher surface area and interfacial polymer-metal interaction. The nanoparticle embedded laminates have shown improvement in flexural strength,and hardness when compared to laminate without nano-α-Al₂ O₃. The properties varied with the loading and size of the nanoparticles. The tensile strength was highest for 0.5 wt% of 200nm nano-α-Al₂O₃, which is 167.80 N/m₂.The highest flexural strength was observed for… More >

SHOGO TAKASUKA^1,*, TATSUHIRO TAKAHASHI¹

Journal of Polymer Materials, Vol.38, No.1-2, pp. 1-10, 2021, DOI:10.32381/JPM.2021.38.1-2.1

Abstract The effects of compounds containing oxazoline groups and the presence of maleic anhydridegrafted polypropylene (PP-g-MAH) on the spectral, morphological, and tensile properties of polypropylene (PP)/liquid crystalline polymer (LCP) blends were investigated. A wholly aromatic LCP having a low melting point which was copolyester, namely AL-7000 have been used, because thermal decomposition of PP and compatibilizer must be prevented.Compression molding was selected as the molding method because it allows molding with a small amount of sample. The binary blends of PP and LCP showed a degradation of tensile properties compared to pure PP. However, the addition of 2,2'-bis(2-oxazoline) and PP-g-MAH as… More >

A. MADHAN KUMAR¹, K. JAYAKUMAR^2,*, M. SHALINI³

Journal of Polymer Materials, Vol.39, No.3-4, pp. 269-281, 2022, DOI:10.32381/JPM.2022.39.3-4.7

Abstract Polylactic acid (PLA) is the most popular thermoplastic biopolymer providing a stiffness and strength alternative to fossil-based plastics. It is also the most promising biodegradable polymer on the market right now, thus gaining a substitute for conservative artificial polymers. Therefore, the current research focuses on synthesizing and mechanical characterization of particlereinforced PLA composites. The hot compression molding technique was used to fabricate PLA-based composites with 0, 2.5, 5, and 7.5 weight % of sawdust, rice husk, and bagasse particle reinforcements to enhance the performance of the PLA. The pellets of PLA matrix were taken with an average size of 3… More >

GAURAV AGARWAL

Journal of Polymer Materials, Vol.39, No.3-4, pp. 255-267, 2022, DOI:10.32381/JPM.2022.39.3-4.6

Abstract Studies were conducted to observe the effect of fracture toughness and damping response on fabric reinforced epoxy polymer composites. The samples of glass fabric, kevlar fabric and carbon fabric having 15wt%, 25wt%, 35wt%, 45wt% and 55wt % fabric content were prepared and tested following ASTM standards. Fracture toughness, peak load and increase in energy absorption are determined for the fabric-epoxy composites. Effect of temperature on storage modulus, loss modulus and tan delta values for various percentages of fabric epoxy composites are noticed and corresponding damping response behaviour is determined. The results revealed that reduction in strength at higher percentage of… More >

MUHAMAD SOFFI BIN MANDA^1,2, MOHD RUZAIMI BIN MAT REJAB¹, SHUKUR ABU HASSAN^3,4, MAT UZIR BIN WAHIT^3,4, JOSEPH SELVI BINOJ^5,*, BRIGHT BRAILSON MANSINGH⁶, SITI SAFARAH BINTI AMIRNUDDIN³, ALAMRY ALI⁷, KHENG LIM GOH^8,9, DIDIK NURHADIYANTO¹⁰

Journal of Polymer Materials, Vol.39, No.3-4, pp. 241-253, 2022, DOI:10.32381/JPM.2022.39.3-4.5

Abstract This study investigates the potential of Tin Slag Polymer Concrete (TSPC) strengthening through confinement using basalt fiber reinforced polymer (BFRP) and aramid fiber reinforced polymer (AFRP) confinement. TSPC short cylindrical column samples have been wrapped with BFRP and AFRP in a single layer (30 mm overlap) using Sikadur-330 epoxy and final samples were coded as TSPC-UC, TSPC-BF and TSPC-AF for unconfined, BFRP and AFRP for confined respectively. After curing for 30 days at room temperature, compressive test has been performed to know the strength, modulus, strain, fracture energy and failure modes of unconfined and confined TSPC. Test result shows that… More >

RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.3-4, pp. 205-221, 2022, DOI:10.32381/JPM.2022.39.3-4.3

Abstract Epoxy methacrylate of bisphenol-C-jute/treated jute and their sandwich composites of white coir, brown coir, wild almond, bamboo, betel nut, and palmyra were prepared by a compression molding technique under 5MPa pressure and at room temperature for three h. The neat sample showed almost double tensile strength than its jute composite, while it is comparable for treated jute. The composites revealed substantially improved flexural strength compared to neat. The neat, jute/treated jute and their sandwich composites indicated good impact strength, pretty good Barcol hardness, and fairly good electric strength. The neat sample showed excellent volume resistivity, while jute/treated jute and their… More >

PARSOTAM H. PARSANIA^1,*, JIGNESH V. PATEL², JIGNESH P. PATEL³

Journal of Polymer Materials, Vol.40, No.3-4, pp. 271-284, 2023, DOI:10.32381/JPM.2023.40.3-4.9

Abstract Bisphenol-C epoxy crotonate resin was synthesized by reacting 8.09g epoxy resin of bisphenolC, and 2.15g crotonic acid using 25 mL 1,4-dioxane as a solvent, and 1 mL triethylamine as a catalyst at reflux temperature for 1-6 h. Solid epoxy crotonate (ECCR) is highly soluble in common organic solvents. ECCR was characterized by its acid (24.5-1.5 mg KOH/g) and hydroxyl (504.5-678.4 mg KOH/g) values. The structure of ECCR is supported by FTIR and 1 HNMR spectroscopic methods. A DSC endothermic transition at 229o C indicated melting followed by thermal polymerization of ECCR. ECCR is thermally stable up to 320o C and… More >

XINGMIN XU¹, QINGQING SUN², AIRONG XU², XINBAO GUO²

Journal of Polymer Materials, Vol.39, No.1-2, pp. 167-181, 2022, DOI:10.32381/JPM.2022.39.1-2.11

Abstract Silk fibroin (SF) with renewability, biocompatibility and biodegradability shows potential application in various fields including biomedicine, tissue engineering, and wearable electronic devices. Herein, SF is used to exert effective reinforcement of polyvinyl alcohol (PVA) composite film to further improve its practicability. As such, PVA/SF composite films were prepared for the first time using a facile approach. The films were characterized to investigate possible interaction of PVA with SF. Meanwhile, systematic investigations have also been completed to explore the influences of PVA/SF mass ratio on the mechanical properties (tensile strength, elongation at break), biodegradability and biocompatibility, the morphology, crystallinity, chemical structure… More >

S. ARULMURUGAN^a,*, N. VENKATESHWARAN^a, S. KUMAR^a, P. CHANDRASEKAR^a

Journal of Polymer Materials, Vol.40, No.1-2, pp. 83-91, 2023, DOI:10.32381/JPM.2023.40.1-2.7

Abstract In this research, the effect of UV light on the mechanical properties of jute polymer nanocomposites was evaluated. Due to the fact that photodegradation is a surface process and is confined to the degradation of the mechanical characteristics of polyester resin, this study focuses on the resin quality. Therefore, test samples comprised of fibre-reinforced polyester nanoclay composites were fabricated different weight ratios of nanoclay. They were put through UV exposure in an Ultraviolet (UV) chamber. Tensile testing samples were made in accordance with ASTMD638 and had a minimum thickness of 3 mm. Additionally, specimens for Flexural and Impact testing were… More >