Sujoy Mukherjee¹, Ranjan Ganguli^1,2

CMC-Computers, Materials & Continua, Vol.19, No.2, pp. 105-134, 2010, DOI:10.3970/cmc.2010.019.105

Abstract In this study, variational principle is used for dynamic modeling of an Ionic Polymer Metal Composite (IPMC) flapping wing. The IPMC is an Electro-active Polymer (EAP) which is emerging as a useful smart material for `artificial muscle' applications. Dynamic characteristics of IPMC flapping wings having the same size as the actual wings of three different dragonfly species Aeshna Multicolor, Anax Parthenope Julius and Sympetrum Frequens are analyzed using numerical simulations. An unsteady aerodynamic model is used to obtain the aerodynamic forces. A comparative study of the performances of three IPMC flapping wings is conducted. Among the three species, it is… More >

Lutz Nasdala¹ , Andreas Kempe¹ and Raimund Rolfes¹

CMC-Computers, Materials & Continua, Vol.19, No.1, pp. 57-104, 2010, DOI:10.3970/cmc.2010.019.057

Abstract In order to understand the underlying mechanisms of inelastic material behavior and nonlinear surface interactions, which can be observed on macroscale as damping, softening, fracture, delamination, frictional contact etc., it is necessary to examine the molecular scale. Force fields can be applied to simulate the rearrangement of chemical and physical bonds. However, a simulation of the atomic interactions is very costly so that classical molecular dynamics (MD) is restricted to structures containing a low number of atoms such as carbon nanotubes. The objective of this paper is to show how MD simulations can be integrated into the finite element method… More >

Fangyi Li¹, Guangyao Li^2,3, Guangyong Sun², Zhen Luo⁴, Zheng Zhang²

CMC-Computers, Materials & Continua, Vol.19, No.1, pp. 37-56, 2010, DOI:10.3970/cmc.2010.019.037

Abstract The focus of this paper is concentrated on multi-disciplinary and multi-objective optimization for thin walled beam systems considering safety, normal mode, static loading-bearing and weight, in which the uncertainties of the parameters are described via intervals. The size and shape of the cross-section are treated as design parameters during optimization. Considering the lightweight and safety, the design problem is formulated with two individual objectives to measure structural weight and maximum energy absorption, respectively, constrained by the average force, normal mode and maximum stress. The optimization problem with uncertainties is further transformed into a deterministic optimization based on interval number programming.… More >

Chih-Wen Chang^1,2, Chein-Shan Liu³

CMC-Computers, Materials & Continua, Vol.19, No.1, pp. 17-36, 2010, DOI:10.3970/cmc.2010.019.017

Abstract The present study shows a backward group preserving scheme (BGPS) to deal with the multi-dimensional backward wave problem (BWP). The BWP is well-known as seriously ill-posed because the solution does not continuously count on the given data. When three numerical experiments are tested, we reveal that the BGPS is applicable to the multi-dimensional BWP. Even with noisy final data, the BGPS is also robust against perturbation. The numerical results are very pivotal in the computations of multi-dimensional BWP. More >

Veturia Chiroiu¹, Ligia Munteanu² and Antonio S. Gliozzi³

CMC-Computers, Materials & Continua, Vol.19, No.1, pp. 1-16, 2010, DOI:10.3970/cmc.2010.019.001

Abstract This paper develops a mechanical model for multifunctional reinforced carbon nanotube (CNT) beams. The model is obtained by introducing the couple stresses into the constitutive equations of linear viscoelastic theory. The material functions are determined using the homogenization method. More >

L.L. Zhu^1,2,3, X.J. Zheng^1,2

CMC-Computers, Materials & Continua, Vol.18, No.3, pp. 301-320, 2010, DOI:10.3970/cmc.2010.018.301

Abstract The phonon properties of spatially confined nanofilms under the preexisting stress fields are investigated theoretically by accounting for the confinement effects and acoustoelastic effects. Due to the spatial confinement in low-dimensional structures, the phonon dispersion relations, phonon group velocities as well as the phonon density of states are of significant difference with the ones in bulk structures. Here, the continuum elasticity theory is made use of to determine the phonon dispersion relations of shear modes (SH), dilatational modes (SA) and the flexural modes (AS), thus to analyze the contribution of stress fields on the phonon performance of confined nanofilms. Our… More >

CMC-Computers, Materials & Continua, Vol.18, No.3, pp. 271-300, 2010, DOI:10.3970/cmc.2010.018.271

Abstract The processing maps are a superimposition of iso-efficiency contour map and flow instability map, which are used to design hot working processing conditions in a wide variety of materials. In order to construct the processing maps, the efficiency of power dissipation and an instability criterion taking into account the contribution of strain and microstructure evolution are proposed based on a set of microstructure-based viscoplastic constitutive equations. In viscoplastic constitutive equations, the grain size of matrix phase and the dislocation density are taken as internal state variables. And, the material constants in present equations can be identified by a genetic algorithm… More >

A.J. Shaw¹ and P.D. Gosling^1,2

CMC-Computers, Materials & Continua, Vol.18, No.3, pp. 237-270, 2010, DOI:10.3970/cmc.2010.018.237

Abstract This article has no abstract. More >

Metin Kök^1,2, Erdogan Kanca³

CMC-Computers, Materials & Continua, Vol.18, No.3, pp. 213-236, 2010, DOI:10.3970/cmc.2010.018.213

Abstract In this investigation, a new model was developed to predict the wear rate of Al2O3 particle-reinforced aluminum alloy composites by Genetic Expression Programming (GEP). The training and testing data sets were obtained from the well established abrasive wear test results. The volume fraction of particle, particle size of reinforcement, abrasive grain size and sliding distance were used as independent input variables, while wear rate (WR) as dependent output variable. Different models for wear rate were predicted on the basis of training data set using genetic programming and accuracy of the best model was proved with testing data set. The two-body… More >

Jun Xu^1,2, Yibing Li¹, Xi Chen^2,3, Yuan Yan^2,3, Dongyun Ge^4,1, Bohan Liu¹

CMC-Computers, Materials & Continua, Vol.18, No.2, pp. 183-212, 2010, DOI:10.3970/cmc.2010.018.183

Abstract The crack pattern in a PVB laminated windshield upon head impact is of considerable interest because it contains important information on energy mitigation, pedestrian protection, and accident reconstruction. We carry out a systematic numerical study based on the extended finite element method (XFEM), to investigate the effects of various material and system variables, including the impact speed, effective head mass, PVB interlayer material thickness and property, windshield curvature, aspect ratio and size, boundary constraint, impact angle and off-center impact, on the parameters characterizing the resulting crack pattern, i.e. the crack length, crack angle and circumferential crack shape. General relations bridging… More >