DHARMESH B. SANKHAVARA, JALPA V. CHOPDA, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.36, No.4, pp. 371-379, 2019, DOI:10.32381/JPM.2019.36.04.6

Abstract The epoxy methacrylate of (2E,6E)-2, 6-bis(4-hydroxybenzylidene)cyclohexanone (EBHBCMA) was synthesized by condensing 0.02 equi. EBHBC, 0.04 equi. methacrylic acid, 50 mL THF as a solvent and 0.2 mL triethylamine as a catalyst at reflux temperature for 1-5 h to get acid value < 10. EBHBCMA showed good solubility in common solvents. The structure of EBHBCMA was supported by UV-Vis., FTIR, 1 H NMR, and 13C NMR spectroscopic techniques. DSC thermogram of EBHBCMA exhibited two endothermic peaks (86.4 and 117.1 °C) and one exothermic peak (142.6°C) due to moisture release, melting and curing of the resin, respectively. EBHBCMA is thermally stable up… More >

ÇAĞLA GÜL GÜLDİKEN, LEVENT AKYALÇIN, HASAN FERDİ GERÇEL^*

Journal of Polymer Materials, Vol.36, No.4, pp. 337-349, 2019, DOI:10.32381/JPM.2019.36.04.4

Abstract In the present study, polybenzimidazole (PBI) polymer which has a great importance in polymer electrolyte membrane (PEM) research was synthesized via the solution polycondensation method, under various synthesis conditions to put forward the effect of the synthesis parameters on the properties of the synthesized polymer and consequently to the quality of the prepared polymer electrolyte membrane. The synthesized polymers were characterized in terms of their chemical structure, thermal degradation behaviour, and molecular weight by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (¹ H NMR), thermogravimetric analysis (TGA). The Mechanical properties, acid-doping level capacity, proton conductivity, and fuel cell… More >

JALPA V. CHOPDA, DHARMESH B. SANKHAVARA, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.36, No.1, pp. 101-109, 2019, DOI:10.32381/JPM.2019.36.01.8

Abstract The epoxy resin (EMBHBC) of (2E,6E)-bis (4-hydroxybenzylidene)-4-methyl cyclohexanone (MBHBC) was synthesized by condensing 0.5 mol MBHBC and 2.5 mol epichlorohydrin in 500 mL isopropyl alcohol as a solvent and 1.0 mol NaOH in 50 mL water as a catalyst at 80°C for 3 h. The structure of EMBHBC was supported by UV-Vis, FTIR, ¹ HNMR and ¹³CNMR spectroscopic techniques. Molecular weights and molecular weight distribution of EMBHBC were determined by gel permeation chromatography. DSC thermogram of EMBHC showed one endothermic transition (95.9°C) and two exothermic transitions (317.7°C and 382.2°C) due to melting and decomposition transitions, respectively. EMBHBC is thermally stable… More >

SAURABH SAXENA^a, PRATEEK MALIK^a, GEETHA SESHADRI^a,*, AJAY K. TYAGI^a, UTTAM KUMAR MANDAL^b

Journal of Polymer Materials, Vol.36, No.1, pp. 39-51, 2019, DOI:10.32381/JPM.2019.36.01.4

Abstract Medium molecular weight liquid perfluoropolyethers (840 u to 1372 u) were synthesized by photopolymerization of hexafluoropropylene (HFP) in the presence of oxygen. Effects of various reaction parameters such as temperature, pressure, UV wattage and reaction time on yield, viscosity and molecular weight of PFPEs were studied. Out of all the parameters, the effect of reaction temperature was found the most significant on molecular weight of PFPEs. By increasing reaction temperature, viscosity and molecular weight of PFPEs where decreased. By increasing the wattage of the lamp, viscosity and molecular weight of PFPEs where also decreased. PFPEs obtained from reactions were subjected… More >

DHARMESH B. SANKHAVARA, JALPA CHOPDA, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.36, No.1, pp. 13-21, 2019, DOI:10.32381/JPM.2019.36.01.2

Abstract Chalcone based epoxy resin (EBHBC) of (2E, 6E)- bis(4-hydroxybenzylidene) cyclohexanone (BHBC) was synthesized by condensing 0.5 mol BHBC and 2.5 mol epichlorohydrin in 500 mL isopropanol as a solvent and 1.0 mol NaOH in 50 mL water as a catalyst at 80o C. The structure of EBHBC is supported by spectral techniques. Molecular weights and molecular weight distribution of EBHBC were determined by gel permeation chromatography. DSC thermogram of EBHC showed one endothermic transition (146.1°C) and two endothermic transitions (253.52°C and 397.34°C) due to melting, some physical change and decomposition transitions, respectively. EBHBC is thermally stable up to about 300o… More >

DIPESHKUMAR D. KACHHADIYA, Z.V.P. MURTHY^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 49-61, 2021, DOI:10.32381/JPM.2021.38.1-2.5

Abstract The conventional process for methanol-water separation like distillation consumes about 60 % of total energy. As an alternative, researchers have developed a membrane-based separation process for alcohol-water mixtures separation. However, there is a big challenge for researches to separate alcohol-water aqueous mixtures using a polymeric membrane because of swelling. In the present work, the aim is to separate methanol from water by pervaporation using polymeric membranes made up of polyvinylidenefluroide (PVDF) and polyethylene glycol (PEG200) modified PVDF membranes. The membranes were characterized by thermogravimetry analysis (TGA), field emission scanning electron microscopy (FE-SEM), and Fourier-transform infrared spectroscopy (FTIR). A study on… More >

JALPA V. CHOPDA, DHARMESH B. SANKHAVARA, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 35-48, 2021, DOI:10.32381/JPM.2021.38.1-2.4

Abstract Conventional curing study of epoxy resin of (2E, 6E)-bis (4-hydroxybenzylidene)-4-methyl cyclohexanone (EMBHBC) was conducted at 140 0 /150 0 C by using 4,4’-diaminodiphenylmethane (DDM),4,4’-diaminodiphenylsulphone (DDS),4-4’-diaminodiphenyl ether (DDE), p-phenylenediamine (PDA), 1,2,3,6-tetrahydrophthalic anhydride(THPA), maleic anhydride (MAH) and pyromellitic dianhydride (PMDA). The gel time for DDS, THPA and DDM hardeners are found considerably longer than those of DDE, PDA, MAH and PMDA systems indicated different reactivity towards curing of EMBHBC. Sol–gel analysis of cured resins was carried out in DMF at room temperature. Diamines cured samples showed 76.3-97.5% gel fractions, while anhydrides cured samples showed 84.6-99.6% gel fractions. DDM, PDA and THPA are… More >

DHARMESH B. SANKHAVARA, JALPA V. CHOPDA, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 11-19, 2021, DOI:10.32381/JPM.2021.38.1-2.2

Abstract The curing of epoxy resin of (2E, 6E)-2,6-bis(4-hydroxy benzylidene) cyclohexanone (EBHBC) was carried out at four different heating rates in the nitrogen atmosphere by using 4,4’-diamino diphenylmethane (DDM), 4,4’-diamino diphenyl sulfone (DDS), and 1,2,3,6-tetrahydrophthalic anhydride (THPA) as hardeners. From DSC curves onset, peak exotherm and end set temperatures, as well as heat release, were derived. The energy of activation was derived following Kissinger and Ozawa methods. Observed trend in Ea is EBHBC-THPA > EBHBCDDS > EBHBC-DDM > EBHBC. Nature and chemical structure of the hardeners affected the curing of EBHBC. More >

MUHAMAD SOFFI BIN MANDA^1,2, MOHD RUZAIMI BIN MAT REJAB¹, SHUKUR ABU HASSAN^3,4, MAT UZIR BIN WAHIT^3,4, JOSEPH SELVI BINOJ^5,*, BRIGHT BRAILSON MANSINGH⁶, SITI SAFARAH BINTI AMIRNUDDIN³, ALAMRY ALI⁷, KHENG LIM GOH^8,9, DIDIK NURHADIYANTO¹⁰

Journal of Polymer Materials, Vol.39, No.3-4, pp. 241-253, 2022, DOI:10.32381/JPM.2022.39.3-4.5

Abstract This study investigates the potential of Tin Slag Polymer Concrete (TSPC) strengthening through confinement using basalt fiber reinforced polymer (BFRP) and aramid fiber reinforced polymer (AFRP) confinement. TSPC short cylindrical column samples have been wrapped with BFRP and AFRP in a single layer (30 mm overlap) using Sikadur-330 epoxy and final samples were coded as TSPC-UC, TSPC-BF and TSPC-AF for unconfined, BFRP and AFRP for confined respectively. After curing for 30 days at room temperature, compressive test has been performed to know the strength, modulus, strain, fracture energy and failure modes of unconfined and confined TSPC. Test result shows that… More >

NIKITA GUPTA, SARITA KALLA, Z.V.P. MURTHY^*

Journal of Polymer Materials, Vol.40, No.3-4, pp. 317-328, 2023, DOI:10.32381/JPM.2023.40.3-4.12

Abstract Tetramethylurea (TMU) is a good solvent for organic substances and has received little attention as compared to other solvents. The TMU is a polar solution and is one of the molecules with an amphiphilic character. In the present work, an attempt has been made to use TMU as an additive in the preparation of nanofiltration membranes to improve the hydrophilicity of the membrane. The polysulfone membrane has been modified by incorporating different concentrations of TMU (0, 0.5, and 1 wt.%) in order to check the rejection of atrazine in water. This study aim is to optimize the conditions to enhance… More >