XIAOXI WANG¹, YANFEI JIA², QIANG LI², QIANG YANG², YINGFENG LIU¹, BEIFENG WEI¹, XIANG NIU¹, YINJIE ZHANG¹, XIAODONG LUO², ZIYU ZHAO^1,*, PENG WANG^1,*

Oncology Research, Vol.32, No.5, pp. 933-941, 2024, DOI:10.32604/or.2023.042581

Abstract MicroRNA (miR)-200b-3p has been associated with many tumors, but its involvement in pituitary adenoma is unclear. This study investigated the molecular mechanism underlying miR-200b-3p regulation in pituitary adenomas to provide a theoretical basis for treatment. Bioinformatics was used to analyze pituitary adenoma-related genes and screen new targets related to RECK and miRNA. As well, the relationship between miR-200b-3p and RECK protein was verified using a double-luciferase reporter gene assay. The expression of miR-200b-3p in clinical samples was analyzed by in situ hybridization. Transfection of the miR-200b-3p inhibitor and small interfering-RECK (si-RECK) was verified by qPCR. GH3 cell viability and proliferation… More >

JINGJING TIAN^1,*, XIBAO HU², XINRONG ZHANG¹

Oncology Research, Vol.32, No.5, pp. 925-931, 2024, DOI:10.32604/or.2023.042447

Abstract To confirm the relationship between Circ_0003855 and EC, we purchased the Human esophageal carcinoma cell line Eca109 and normal human esophageal epithelial cells HEEC, and the expression levels of Circ_0003855, miR-622, and FLOT1 were detected. The results show that Circ_0003855 and FLOT1 were highly expressed in Eca109 cells, while miR-622 was lowly expressed (p < 0.05). Subsequently, Circ_0003855 small interfering RNA (si-Circ_0003855) and its negative control (si-NC) were used to detect changes in cellular biological behaviors. We found that the activity of Eca109 cells was reduced after interfering with the expression of Circ_0003855, and miR-622 expression was elevated, while FLOT1… More >

Di Qiu^1,3,4, Rongpei Shi^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 1017-1028, 2024, DOI:10.32604/cmes.2024.048797

Abstract For media with inclusions (e.g., precipitates, voids, reinforcements, and others), the difference in lattice parameter and the elastic modulus between the matrix and inclusions cause stress concentration at the interfaces. These stress fields depend on the inclusions’ size, shape, and distribution and will respond instantly to the evolving microstructure. This study develops a phase-field model concerning modulus heterogeneity. The effect of modulus heterogeneity on the growth process and equilibrium state of the α plate in Ti-6Al-4V during precipitation is evaluated. The α precipitate exhibits strong anisotropy in shape upon cooling due to the interplay of the elastic strain and interfacial… More >

Chengbao Hu^1,2,3, Shilin Gong^4,*, Bin Chen^1,2,3, Zhongling Zong⁴, Xingwang Bao⁵, Xiaojian Ru⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 997-1015, 2024, DOI:10.32604/cmes.2024.048640

Abstract Strain localization frequently occurs in cohesive materials with friction (e.g., composites, soils, rocks) and is widely recognized as a fundamental cause of progressive structural failure. Nonetheless, achieving high-fidelity simulation for this issue, particularly concerning strong discontinuities and tension-compression-shear behaviors within localized zones, remains significantly constrained. In response, this study introduces an integrated algorithm within the finite element framework, merging a coupled cohesive zone model (CZM) with the nonlinear augmented finite element method (N-AFEM). The coupled CZM comprehensively describes tension-compression and compression-shear failure behaviors in cohesive, frictional materials, while the N-AFEM allows nonlinear coupled intra-element discontinuities without necessitating extra nodes or… More >

Zibin Mao¹, Qinghai Zhao^1,2,*, Liang Zhang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 757-792, 2024, DOI:10.32604/cmes.2024.048016

Abstract This paper proposes a multi-material topology optimization method based on the hybrid reliability of the probability-ellipsoid model with stress constraint for the stochastic uncertainty and epistemic uncertainty of mechanical loads in optimization design. The probabilistic model is combined with the ellipsoidal model to describe the uncertainty of mechanical loads. The topology optimization formula is combined with the ordered solid isotropic material with penalization (ordered-SIMP) multi-material interpolation model. The stresses of all elements are integrated into a global stress measurement that approximates the maximum stress using the normalized p-norm function. Furthermore, the sequential optimization and reliability assessment (SORA) is applied to… More >

Chengkan Xu^1,2,4, Xiaofei Wang³, Yixuan Li², Guannan Wang^2,*, He Zhang^2,4,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 957-974, 2024, DOI:10.32604/cmes.2024.047327

Abstract Structural damage in heterogeneous materials typically originates from microstructures where stress concentration occurs. Therefore, evaluating the magnitude and location of localized stress distributions within microstructures under external loading is crucial. Repeating unit cells (RUCs) are commonly used to represent microstructural details and homogenize the effective response of composites. This work develops a machine learning-based micromechanics tool to accurately predict the stress distributions of extracted RUCs. The locally exact homogenization theory efficiently generates the microstructural stresses of RUCs with a wide range of parameters, including volume fraction, fiber/matrix property ratio, fiber shapes, and loading direction. Subsequently, the conditional generative adversarial network… More > Graphic Abstract

Junjie Zhao, Diyuan Li^*, Jingtai Jiang, Pingkuang Luo

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 275-304, 2024, DOI:10.32604/cmes.2024.046960

Abstract Traditional laboratory tests for measuring rock uniaxial compressive strength (UCS) are tedious and time-consuming. There is a pressing need for more effective methods to determine rock UCS, especially in deep mining environments under high in-situ stress. Thus, this study aims to develop an advanced model for predicting the UCS of rock material in deep mining environments by combining three boosting-based machine learning methods with four optimization algorithms. For this purpose, the Lead-Zinc mine in Southwest China is considered as the case study. Rock density, P-wave velocity, and point load strength index are used as input variables, and UCS is regarded… More > Graphic Abstract

Qi Zhang^1,2,4,5, Zhixin Chen³, Yang Wu^4,*, Guoqi Xiang², Guang Wen¹, Xuegang Zhang², Yongchun Xie², Guangchun Yang²

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 593-619, 2024, DOI:10.32604/cmes.2023.046319

Abstract Although there is currently no unified standard theoretical formula for calculating the contact stress of cylindrical gears with a circular arc tooth trace (referred to as CATT gear), a mathematical model for determining the contact stress of CATT gear is essential for studying how parameters affect its contact stress and building the contact stress limit state equation for contact stress reliability analysis. In this study, a mathematical relationship between design parameters and contact stress is formulated using the Kriging Metamodel. To enhance the model’s accuracy, we propose a new hybrid algorithm that merges the genetic algorithm with the Quantum Particle… More >

Ying Wang^1,*, Longxiao Chao¹, Jun Chen², Songbai Jiang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 201-227, 2024, DOI:10.32604/cmes.2024.046129

Abstract In order to investigate the fatigue performance of orthotropic anisotropic steel bridge decks, this study realizes the simulation of the welding process through elastic-plastic finite element theory, thermal-structural sequential coupling, and the birth-death element method. The simulated welding residual stresses are introduced into the multiscale finite element model of the bridge as the initial stress. Furthermore, the study explores the impact of residual stress on crack propagation in the fatigue-vulnerable components of the corroded steel box girder. The results indicate that fatigue cracks at the weld toe of the top deck, the weld root of the top deck, and the… More > Graphic Abstract

LIJUAN ZHANG^1,#, QINGYIN MENG^2,#, LI ZHUANG¹, QUAN GONG¹, XIANDA HUANG³, XUEQIN LI¹, SHIJUAN LI¹, GUOQIN WANG⁴, XICAI WANG^5,*

BIOCELL, Vol.48, No.4, pp. 581-590, 2024, DOI:10.32604/biocell.2024.047260

Abstract Background: Lung adenocarcinoma is a very pervasive histological form of lung cancers, and inhibiting metastasis is crucial for effective treatment. In this investigation, we explored the functional interaction of miR-30a-5p and the putative transcription factor 2 of the homeodomain (PHTF2) in dictating the aggressiveness and metastasis of lung adenocarcinoma. Method: We collected clinical samples to evaluate the expression patterns of miR-30a-5p and PHTF2 in lung adenocarcinoma along with normal tissues. Cellular experiments including cell count kit (CCK)-8 growth assay, apoptosis analysis, migration and invasion examinations were performed to assess the aggressiveness of lung adenocarcinoma cells. Furthermore, we examined tumorigenesis and… More > Graphic Abstract