Haitao Yue¹, Chenguang Guo^1,*, Qiang Li¹, Lijuan Zhao¹, Guangbo Hao²

CMES-Computer Modeling in Engineering & Sciences, Vol.124, No.3, pp. 937-952, 2020, DOI:10.32604/cmes.2020.010565

Abstract To improve the milling surface quality of the Al-Li alloy thin-wall workpieces and reduce the cutting energy consumption. Experimental research on the milling processing of AA2195 Al-Li alloy thin-wall workpieces based on Response Surface Methodology was carried out. The single factor and interaction of milling parameters on surface roughness and specific cutting energy were analyzed, and the multi-objective optimization model was constructed. The Multiobjective Particle Swarm Optimization algorithm introducing the Chaos Local Search algorithm and the adaptive inertial weight was applied to determine the optimal combination of milling parameters. It was observed that surface roughness was mainly influenced by feed… More >

Carlos Lopez-Franco¹, Javier Gomez-Avila², Nancy Arana-Daniel³, Alma Y. Alanis

Intelligent Automation & Soft Computing, Vol.24, No.2, pp. 431-442, 2018, DOI:10.31209/2018.100000000

Abstract This paper presents a method for 3D pose estimation using visual information and a soft-computing algorithm. The algorithm uses quaternions to represent rotations, and Particle Swarm Optimization to estimate such quaternion. The rotation estimation problem is cast as a minimization problem, which finds the best quaternion for the given data using the PSO algorithm. With this technique, the algorithm always returns a valid quaternion, and therefore a valid rotation. During the estimation process, the algorithm is able to detect and reject outliers. The simulations and experimental results show the robustness of algorithm against noise and outliers. More >

Hong Choon Ong^a, Surafel Luleseged Tilahun^b, Wai Soon Lee^a, Jean Meadard T. Ngnotchouye^b

Intelligent Automation & Soft Computing, Vol.24, No.2, pp. 359-366, 2018, DOI:10.1080/10798587.2017.1294811

Abstract Metaheuristic algorithms are found to be promising for difficult and high dimensional problems. Most of these algorithms are inspired by different natural phenomena. Currently, there are hundreds of these metaheuristic algorithms introduced and used. The introduction of new algorithm has been one of the issues researchers focused in the past fifteen years. However, there is a critic that some of the new algorithms are not in fact new in terms of their search behavior. Hence, a comparative study in between existing algorithms to highlight their differences and similarity needs to be studied. Apart from knowing the similarity and difference in… More >

Dongping Tian^a,b

Intelligent Automation & Soft Computing, Vol.24, No.2, pp. 331-342, 2018, DOI:10.1080/10798587.2017.1293881

Abstract Particle swarm optimization (PSO) is a population based swarm intelligence algorithm that has been deeply studied and widely applied to a variety of problems. However, it is easily trapped into the local optima and premature convergence appears when solving complex multimodal problems. To address these issues, we present a new particle swarm optimization by introducing chaotic maps (Tent and Logistic) and Gaussian mutation mechanism as well as a local re-initialization strategy into the standard PSO algorithm. On one hand, the chaotic map is utilized to generate uniformly distributed particles to improve the quality of the initial population. On the other… More >

Qing-Hua He^a, Bin Yu^b, Xin Hong^a, Bo Lv^a, Tao Liu^b, Jian Ran^b, Yu-Tian Bi^a

Intelligent Automation & Soft Computing, Vol.24, No.2, pp. 223-230, 2018, DOI:10.1080/10798587.2016.1261957

Abstract Lung abnormalities and respiratory diseases increase with the development of urban life. Lung sound analysis provides vital information of the present condition of the pulmonary. But lung sounds are easily interfered by noises in the transmission and record process, then it cannot be used for diagnosis of diseases. So the noised sound should be processed to reduce noises and to enhance the quality of signals received. On the basis of analyzing wavelet packet transform theory and the characteristics of traditional wavelet threshold de-noising method, we proposed a modified threshold selection method based on Particle Swarm Optimization (PSO) and support vector… More >

N. Mohanapriya¹, Dr. B. Kalaavathi²

Intelligent Automation & Soft Computing, Vol.25, No.4, pp. 663-672, 2019, DOI:10.31209/2018.100000041

Abstract Medical images are obtained straight from the medical acquisition devices so that, the image quality becomes poor and may contain noises. Low contrast and poor quality are the major issues in the production of medical images. Medical imaging enhancement technology gives way to solve these issues; it helps the doctors to see the interior portions of the body for early diagnosis, also it improves the features the visual aspects of an image for a right diagnosis. This paper proposes a new blend of Particle Swarm Optimization (PSO) and Accelerated Particle Swarm Optimization (APSO) called Hybrid Partial Swarm Optimization (HPSO) to… More >

Wei Zhang¹, Weifeng Shi², Bing Sun³

Intelligent Automation & Soft Computing, Vol.25, No.3, pp. 423-431, 2019, DOI:10.31209/2018.100000045

Abstract An intelligent optimization algorithm for a marine generator excitation controller is proposed to improve dynamic performance of shipboard power systems. This algorithm combines a belief–desire–intention agent with a quantum-behaved particle swarm optimization (QPSO) algorithm to optimize a marine generator excitation controller. The shipboard zonal power system is simulated under disturbance due to load change or severe fault. The results show that the proposed optimization algorithm can improve marine generator stability compared with conventional excitation controllers under various operating conditions. Moreover, the proposed intelligent algorithm is highly robust because its performance is insensitive to the accuracy of system parameters. More >

Chung Wen Hung, Wei Lung Mao, Han Yi Huang

Intelligent Automation & Soft Computing, Vol.25, No.2, pp. 329-341, 2019, DOI:10.31209/2019.100000093

Abstract Nonlinear system modeling and identification is the one of the most important areas in engineering problem. The paper presents the recurrent fuzzy neural network (RFNN) trained by modified particle swarm optimization (MPSO) methods for identifying the dynamic systems and chaotic observation prediction. The proposed MPSO algorithms mainly modify the calculation formulas of inertia weights. Two MPSOs, namely linear decreasing particle swarm optimization (LDPSO) and adaptive particle swarm optimization (APSO) are developed to enhance the convergence behavior in learning process. The RFNN uses MPSO based method to tune the parameters of the membership functions, and it uses gradient descent (GD) based… More >

Yasir Mehmood, Waseem Shahzad

Intelligent Automation & Soft Computing, Vol.25, No.1, pp. 91-103, 2019, DOI:10.31209/2018.100000017

Abstract Particle swarm optimization (PSO) algorithm is a global optimization technique that is used to find the optimal solution in multimodal problems. However, one of the limitation of PSO is its slow convergence rate along with a local trapping dilemma in complex multimodal problems. To address this issue, this paper provides an alternative technique known as ACPSO algorithm, which enables to adopt a new simplified velocity update rule to enhance the performance of PSO. As a result, the efficiency of convergence speed and solution accuracy can be maximized. The experimental results show that the ACPSO outperforms most of the compared PSO… More >

Amit Chhabra^{1, *}, Gurvinder Singh², Karanjeet Singh Kahlon²

CMC-Computers, Materials & Continua, Vol.64, No.2, pp. 813-834, 2020, DOI:10.32604/cmc.2020.010934

Abstract Cloud computing infrastructure has been evolving as a cost-effective platform for providing computational resources in the form of high-performance computing as a service (HPCaaS) to users for executing HPC applications. However, the broader use of the Cloud services, the rapid increase in the size, and the capacity of Cloud data centers bring a remarkable rise in energy consumption leading to a significant rise in the system provider expenses and carbon emissions in the environment. Besides this, users have become more demanding in terms of Quality-of-service (QoS) expectations in terms of execution time, budget cost, utilization, and makespan. This situation calls… More >