Yan Zhang¹, Shengping Shen¹

CMC-Computers, Materials & Continua, Vol.8, No.1, pp. 17-22, 2008, DOI:10.3970/cmc.2008.008.017

Abstract In this paper, an existed model for adsorption-induced surface stress is modified with physical clarity, based on the equilibrium of force. In the proposed multiscale model, a four-atom system is used, instead of the existed three-atom system which did not consider the force equilibrium. By analyzing the force state of an atom, the thickness of the first layer atoms can be determined. Thus, the proposed model does not need to determine the layer-thickness by experiments or artificially. The results obtained from the proposed model agree very well with the experimental data. This paper is helpful to investigate the atomistic theory… More >

Chaofan Duan¹, Jing Feng^1,*, Haotian Chang¹, Jianping Pan², Liming Duan¹

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 989-1002, 2019, DOI:10.32604/cmc.2019.06033

Abstract Coverage is an important issue for resources rational allocation, cognitive tasks completion in sensor networks. The mobility, communicability and learning ability of smart sensors have received much attention in the past decade. Based on the deep study of game theory, a mobile sensor non-cooperative game model is established for the sensor network deployment and a local information-based topology control (LITC) algorithm for coverage enhancement is proposed. We both consider revenue of the monitoring events and neighboring sensors to avoid nodes aggregation when formulating the utility function. We then prove that the non-cooperative game is an exact potential game in which… More >

Ashwinth Janarthanan^1,*, Dhananjay Kumar¹

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 895-912, 2019, DOI:10.32604/cmc.2019.06805

Abstract Efficient aggregation in wireless sensor nodes helps reduce network traffic and reduce energy consumption. The objective of this work Localization Based Evolutionary Routing (LOBER) is to achieve global optimization for aggregation and WMSN lifetime. Improved localization is achieved by a novel Centroid Based Octant Localization (CBOL) technique considering an arbitrary hexagonal region. Geometric principles of hexagon are used to locate the unknown nodes in the centroid positions of partitioned regions. Flower pollination algorithm, a meta heuristic evolutionary algorithm that is extensively applied in solving real life, complex and nonlinear optimization problems in engineering and industry is modified as Enhanced Flower… More >

Jin Wang^1,2,3, Yu Gao³, Wei Liu³, Wenbing Wu¹, Se-Jung Lim^4,*

CMC-Computers, Materials & Continua, Vol.58, No.3, pp. 711-725, 2019, DOI:10.32604/cmc.2019.05450

Abstract Recently, Wireless sensor networks (WSNs) have become very popular research topics which are applied to many applications. They provide pervasive computing services and techniques in various potential applications for the Internet of Things (IoT). An Asynchronous Clustering and Mobile Data Gathering based on Timer Mechanism (ACMDGTM) algorithm is proposed which would mitigate the problem of “hot spots” among sensors to enhance the lifetime of networks. The clustering process takes sensors’ location and residual energy into consideration to elect suitable cluster heads. Furthermore, one mobile sink node is employed to access cluster heads in accordance with the data overflow time and… More >

Xiaodong Liu¹, Qi Liu^1,*

CMC-Computers, Materials & Continua, Vol.57, No.2, pp. 179-194, 2018, DOI:10.32604/cmc.2018.04025

Abstract In a home energy management system (HEMS), appliances are becoming diversified and intelligent, so that certain simple maintenance work can be completed by appliances themselves. During the measurement, collection and transmission of electricity load data in a HEMS sensor network, however, problems can be caused on the data due to faulty sensing processes and/or lost links, etc. In order to ensure the quality of retrieved load data, different solutions have been presented, but suffered from low recognition rates and high complexity. In this paper, a validation and repair method is presented to detect potential failures and errors in a domestic… More >

Rui Wang¹, Miaomiao Shen^1,*, Yanping Li¹, Samuel Gomes²

CMC-Computers, Materials & Continua, Vol.57, No.1, pp. 25-48, 2018, DOI:10.32604/cmc.2018.02408

Abstract Recently, sparse representation classification (SRC) and fisher discrimination dictionary learning (FDDL) methods have emerged as important methods for vehicle classification. In this paper, inspired by recent breakthroughs of discrimination dictionary learning approach and multi-task joint covariate selection, we focus on the problem of vehicle classification in real-world applications by formulating it as a multi-task joint sparse representation model based on fisher discrimination dictionary learning to merge the strength of multiple features among multiple sensors. To improve the classification accuracy in complex scenes, we develop a new method, called multi-task joint sparse representation classification based on fisher discrimination dictionary learning, for… More >

Y. L. Liu¹, N. Hu², H. Xu³, H. Ning¹, L. K. Wu¹

CMC-Computers, Materials & Continua, Vol.40, No.1, pp. 1-20, 2014, DOI:10.3970/cmc.2014.040.001

Abstract A real-time monitoring technique for local plasticity using Lamb waves was developed. Tensile test of a thin aluminum plate with a circular hole where high stress concentration was induced was conducted to verify this technique. During the tensile test, a series of wave signals passing through the local plastic region were collected using a directional actuator/sensor set to monitor plasticity evolution. A pulse compression technique was used to process the wave signals. With the increase of tensile stress in the specimen, the amplitude changes of S₀ and A₀ modes were obtained and the difference of Lamb wave signals was further… More >

J. Naqui¹, F. Martín¹

CMC-Computers, Materials & Continua, Vol.39, No.3, pp. 267-288, 2014, DOI:10.3970/cmc.2014.039.267

Abstract Metamaterial resonators are electrically small resonant particles useful for the implementation of effective media metamaterials. In this paper, some applications of metamaterial resonators (such as the split ring resonator -SRR-, the complementary split ring resonator -CSRR-, the folded stepped impedance resonator -SIR-, and the electric LC resonator), that exploit the symmetry properties of transmission lines loaded with such symmetric particles, are reviewed. This covers differential (balanced) lines with common mode suppression, linear and angular displacement sensors (including alignment sensors), angular velocity sensors, and radiofrequency barcodes. Advantages and drawbacks as compared to existing implementations are also discussed. More >