Victor A. Eremeyev

The International Conference on Computational & Experimental Engineering and Sciences, Vol.19, No.3, pp. 81-82, 2011, DOI:10.3970/icces.2011.019.081

Abstract The aim of this work is to discuss the nonlinear theory of shells made of material undergoing phase transitions (PT). The interest to mechanics and thermodynamics of thin-walled structures with PT is motivated by the recent investigations of thin martensitic films and biological membranes. Here we present statements of the boundary-value problems of shells and plates with PT within the dynamically and kinematically exact theory of shells. In this shell theory the translation and rotation fields are the kinematically independent variables. The theoretical model is illustrated by the examples of thin circular cylindrical shell and More >

A.V. Ekhlakov², O.M. Khay², Ch. Zhang², J. Sladek³, V. Sladek³

Structural Durability & Health Monitoring, Vol.6, No.3&4, pp. 329-350, 2010, DOI:10.3970/sdhm.2010.006.329

Abstract In this paper, transient crack analysis in two-dimensional, isotropic, continuously non-homo -ge -neous and linear elastic functionally graded materials is presented. A boundary-domain element method based on boundary-domain integral representations is developed. The Laplace-transform technique is utilized to eliminate the dependence on time. Laplace-transformed fundamental solutions of linear coupled thermoelasticity for isotropic, homogeneous and linear elastic solids are applied to derive boundary-domain integral equations. The numerical implementation is performed by using a collocation method for the spatial discretization. The time-dependent numerical solutions are obtained by the Stehfest's inversion algorithm. For an edge crack in a More >

Ahmad Akbari R.¹, Akbar Bagri², Stéphane P. A. Bordas^3,4, Timon Rabczuk⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.65, No.1, pp. 27-74, 2010, DOI:10.3970/cmes.2010.065.027

Abstract This contribution focuses on the simulation of two-dimensional elastic wave propagation in functionally graded solids and structures. Gradient volume fractions of the constituent materials are assumed to obey the power law function of position in only one direction and the effective mechanical properties of the material are determined by the Mori-Tanaka scheme. The investigations are carried out by extending a meshless method known as the Meshless Local Petrov-Galerkin (MLPG) method which is a truly meshless approach to thermo-elastic wave propagation. Simulations are carried out for rectangular domains under transient thermal loading. To investigate the effect More >

Giacomo Landi¹, Surya R. Kalidindi²

CMC-Computers, Materials & Continua, Vol.16, No.3, pp. 273-294, 2010, DOI:10.3970/cmc.2010.016.273

Abstract In this paper, we present a computationally efficient multi-scale framework for predicting the local fields in the representative volume element of a multiphase material system subjected to thermo-mechanical loading conditions. This framework for localization relationships is a natural extension of our recent work on two-phase composites subjected to purely mechanical loading. In this novel approach, the localization relationships take on a simple structure expressed as a series sum, where each term in the series is a convolution product of local structure and the governing physics expressed in the form of influence coefficients. Another salient feature More >

J. Sladek¹, V. Sladek¹, P. Solek², C.L. Tan³, Ch. Zhang⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.47, No.1, pp. 61-96, 2009, DOI:10.3970/cmes.2009.047.061

Abstract The meshless local Petrov-Galerkin (MLPG) method for transient linear thermoelastic analysis is presented. Orthotropic material properties are considered here. In uncoupled thermoelasticity, the temperature field is not influenced by displacements. Therefore, in the first step, the heat conduction equation is solved for the temperature distribution in the domain. The equations of motion are then solved with the inertial term considered. A Heaviside step function as the test functions is applied in the weak-form to derive local integral equations for solving two- and three-dimensional problems. Local integral equations are written on small sub-domains with circular or More >

Donghuan Liu¹, Xiaoping Zheng^1,2, Yinghua Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.39, No.3, pp. 263-300, 2009, DOI:10.3970/cmes.2009.039.263

Abstract A discontinuous Galerkin (DG) finite element method for the heat conduction problems with local high gradient and thermal contact resistance is presented. The DG formulation is constructed by employing the stabilization term and the Bassi-Rebay numerical flux term. The stabilization term is defined by a penalization of the temperature jump at the interface. By eliminating the penalization term of the temperature jump in the region of local high gradient and imperfect contact interfaces, the present DG method is applied to solve problems involving local high gradient and thermal contact resistance where the numerical flux is… More >

L.K. Keppas¹, G.I. Giannopoulos¹, N.K. Anifantis¹

CMES-Computer Modeling in Engineering & Sciences, Vol.25, No.3, pp. 181-196, 2008, DOI:10.3970/cmes.2008.025.181

Abstract In the present paper a boundary element procedure is formulated to treat two-dimensional time dependent thermo-elastic contact problems incorporating thermal resistance along the contacting surfaces. The existence of pressure-dependent thermal contact leads to coupling of temperature and stress fields. Therefore, the inherent non-linearity of the problem demands simultaneous treating of both thermal and mechanical boundary integral equations while iterative procedures are introduced to ensure equilibrium of mechanical and thermal contact conditions at each step of the process. The transient behavior of interfacial cracks in bimaterial solids when undergo thermal shock in the presence of partial More >

J. Sladek¹, V. Sladek¹, Ch. Zhang², C.L. Tan³

The International Conference on Computational & Experimental Engineering and Sciences, Vol.3, No.2, pp. 87-92, 2007, DOI:10.3970/icces.2007.003.087

Abstract In this paper, the Meshless Local Petrov-Galerkin (MLPG) method for two-dimensional (2-d), linear and transient coupled thermoelastic analysis in orthotropic solids is presented. To eliminate the time-dependence in the governing equations, the Laplace-transform technique is used. Local integral equations are derived for small circular sub-domains which surround nodal points distributed over the analyzed domain. As for the spatial variations of the displacements and temperature, they are approximated by the Moving Least-Squares (MLS) scheme. More >

J. Sladek¹, V. Sladek¹, Ch. Zhang², C.L. Tan³

CMES-Computer Modeling in Engineering & Sciences, Vol.16, No.1, pp. 57-68, 2006, DOI:10.3970/cmes.2006.016.057

Abstract The Meshless Local Petrov-Galerkin (MLPG) method for linear transient coupled thermoelastic analysis is presented. Orthotropic material properties are considered here. A Heaviside step function as the test functions is applied in the weak-form to derive local integral equations for solving two-dimensional (2-D) problems. In transient coupled thermoelasticity an inertial term appears in the equations of motion. The second governing equation derived from the energy balance in coupled thermoelasticity has a diffusive character. To eliminate the time-dependence in these equations, the Laplace-transform technique is applied to both of them. Local integral equations are written on small More >

Y.C. Shiah¹, T.L. Guao¹, C.L. Tan²

CMES-Computer Modeling in Engineering & Sciences, Vol.7, No.3, pp. 321-338, 2005, DOI:10.3970/cmes.2005.007.321

Abstract It is well known in elastic stress analysis using the boundary element method (BEM) that an additional volume integral appears in the basic form of the boundary integral equation if thermal effects are considered. In order to restore this general numerical tool as a truly boundary solution technique, it is perhaps most desirable to transform this volume integral exactly into boundary ones. For general 2D anisotropic thermo-elastostatics without heat sources, this was only achieved very recently. The presence of concentrated heat sources in the domain, however, leads to singularities at these points that pose additional More >