Daguan Huang^1,*, Ditao Niu², Li Su^3,*, Hao Zheng², Qiang Fu², Yunhe Liu¹

Journal of Renewable Materials, Vol.10, No.12, pp. 3477-3489, 2022, DOI:10.32604/jrm.2022.021282

Abstract Coral materials can replace concrete aggregates and achieve material self-sufficiency for reducing the construction costs of island projects. This paper studies the effects of different mineral admixtures on the properties of coral aggregate concrete (CAC). The chloride concentration of CAC after different erosion times is measured using the potentiometric method, and the porosity of the CAC is calculated using thermogravimetric and drying methods. The chloride concentration of the CAC presents a two-phases distribution. The peak chloride concentration followed a power function, increasing with the erosion time. The chloride diffusion coefficient of CAC is 7.9%– 37.5% larger than that of ordinary… More >

Shun Kang¹, Xun Yuan¹, Changwu Liu^1,*, Yulin Chen¹, Xianliang Zhou¹, Haikuan Wu², Zhiguo Ma³

Journal of Renewable Materials, Vol.10, No.12, pp. 3521-3538, 2022, DOI:10.32604/jrm.2022.021694

Abstract Part of the tunnel spoil can not be used for concrete due to alkali-aggregate reaction (AAR). Water is an indispensable condition for AAR, so separating the alkali-aggregate from water is of great benefit to controlling the AAR. This paper investigates the modification of concrete and aggregate by hydrophobic impregnation and organic coating and then evaluates their waterproof and mechanical properties by dynamic contact angle (DCA), ultrasonic wave velocity, scanning electron microscope (SEM), nuclear magnetic resonance (NMR), and so on. For waterproofness, hydrophobic impregnation and organic coating can both improve the waterproofness of concrete and aggregate. The organic coating is suitable… More >

Jianan Wu¹, Ke Xue², Zhaowei Ding³, Lei Lang³, Kang Gu³, Xiaolin Li⁴, Mingli Zhang⁵, Desheng Li^3,6,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3167-3183, 2022, DOI:10.32604/jrm.2022.020265

Abstract Thermal insulation is an important indicator to evaluate the construction material in cold region engineering. As we know, adding the industrial waste as lightweight aggregate or creating the pore inside the cement-based composite could make the texture loose, and the thermal insulating capacity of the material would be improved with this texture. Using these methods, the industrial by-product and engineering waste could be cycled in an efficient way. Moreover, after service the fragmented cement composites paste could be used as aggregate in the thermal insulating concrete again. While the porous texture is not favorable for the mechanical strength and long-term… More > Graphic Abstract

Bo Zhang^1,2, Keqing Li^1,2, Siqi Zhang^1,2, Yafei Hu^1,2, Bin Han^1,2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3539-3558, 2022, DOI:10.32604/jrm.2022.021845

Abstract Cemented paste backfill (CPB) is a sustainable mining technology that is widely used in mines and helps to improve the mine environment. To investigate the relationship between aggregate grading and different affecting factors and the uniaxial compressive strength (UCS) of the cemented paste backfill (CPB), Talbol gradation theory and neural networks is used to evaluate aggregate gradation to determine the optimum aggregate ratio. The mixed aggregate ratio with the least amount of cement (waste stone content river sand content = 7:3) is obtained by using Talbol grading theory and pile compactness function and combined with experiments. In addition, the response… More > Graphic Abstract

Xiaoyan Liu^1,*, Li Liu¹, Junqing Zuo², Pingzhong Zhao¹, Xian Xie¹, Shijie Li¹, Kai Lyu^3,*, Chunying Wu⁴, Surendra P. Shah⁵

Journal of Renewable Materials, Vol.10, No.10, pp. 2685-2698, 2022, DOI:10.32604/jrm.2022.019527

Abstract Due to the existence of the attached mortar, the performance of the recycled concrete aggregate (RCA) is inferior to the natural aggregate, which significantly limits its wide application in industry. In this study, five kinds of modified solutions were used to modify the surface of RCA, and the modification effects were compared. The results showed that sodium silicate, nano-silica (NS), Bacillus pasteurii and soybean powder had relatively good modification effects on RCA, which could reduce the crushing value and water absorption, and increase apparent density. The composite solution (15% sodium silicate and 2% NS) and soybean powder solution had better… More >

Ibrahima Diaw^1,2,*, Mactar Faye^1,2, Seckou Bodian², Vincent Sambou²

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.5, pp. 1409-1418, 2022, DOI:10.32604/fdmp.2022.021968

Abstract Plant-based concretes are produced from plant aggregates and a binder. Plant fibers are mainly composed of saccharides (sugars) and these sugars can decrease the concentration of Ca²⁺ ions in the cement pore solution and delay the formation of hydration products. To improve the interfacial bond between fibers and matrix a chemical treatment is widely used. This study investigates the effect of sodium hydroxide treatment on physical and hygroscopic properties of Typha aggregates. In particular, a 5% sodium hydroxide solution is used to treat these aggregates and their bulk and absolute densities, porosity, water content and water absorption are evaluated accordingly.… More > Graphic Abstract

M. Manicka Raja^1,*, S. Manoj Kumar²

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 1017-1032, 2022, DOI:10.32604/iasc.2022.025665

Abstract Privacy of data in Internet of Things (IoT) over fog networks is the biggest challenge in security of Wireless communication networks. In Wireless Sensor Network (WSN), current research on fog computing with IoT is gaining popularity among IoT devices over network. Moreover, the data aggregation will reduce the energy consumption in WSN. Due to the open and hostile nature of WSN, secure data aggregation is the major issue. The existing data aggregation methods in IoT and its associated approaches are lack of limited aggregation functions, heavyweight, issues related to the performance overhead. Besides, the overload on fog node will result… More >

Yuquan Yao¹, Jie Gao^2,3, Jiangang Yang^2,3,*, Bocheng Huang⁴, Liang Song⁵

Journal of Renewable Materials, Vol.10, No.8, pp. 2263-2285, 2022, DOI:10.32604/jrm.2022.018911

Abstract The shortage of natural aggregates is becoming a severe problem in the pavement industry globally. To address this issue, in this study, an effort was made to use reclaimed asphalt pavement (RAP) and coal gangue (CG) as coarse and fine aggregate, respectively for producing the hot mix asphalt (HMA). As the replacement of natural aggregate, there were seven types of HMA containing 20% and 40% RAP coarse aggregate content, and 10% and 25% CG fine aggregate content were designed and prepared. In addition, Marshall Stability test, rutting resistance test, immersion Marshall test, freezing-thaw splitting test, moisture-induced sensitivity test, and low-temperature… More > Graphic Abstract

S. Karthiga^*, A. M. Abirami

Computer Systems Science and Engineering, Vol.42, No.3, pp. 851-866, 2022, DOI:10.32604/csse.2022.021935

Abstract Much attention has been given to the Internet of Things (IoT) by citizens, industries, governments, and universities for applications like smart buildings, environmental monitoring, health care and so on. With IoT, network connectivity is facilitated between smart devices from anyplace and anytime. IoT-based health monitoring systems are gaining popularity and acceptance for continuous monitoring and detect health abnormalities from the data collected. Electrocardiographic (ECG) signals are widely used for heart diseases detection. A novel method has been proposed in this work for ECG monitoring using IoT techniques. In this work, a two-stage approach is employed. In the first stage, a… More >

Mohammad Akhtar¹, Abdulsamee Halahla², Amin Almasri^3,*

Structural Durability & Health Monitoring, Vol.15, No.4, pp. 335-348, 2021, DOI:10.32604/sdhm.2021.015988

Abstract This research aims to study the effect of elevated temperature on the compressive strength evolution of concrete made with recycled aggregate. Demolished building concrete samples were collected from four different sites in Saudi Arabia, namely from Tabuk, Madina, Yanbu, and Riyadh. These concretes were crushed and recycled into aggregates to be used to make new concrete samples. These samples were tested for axial compressive strength at ages 3, 7, 14, and 28 days at ambient temperature. Samples of the same concrete mixes were subjected to the elevated temperature of 300°C and tested for compressive strength again. The experimental result reveals… More >