H. Tang¹, L.C. Wrobel², Z. Fan²

FDMP-Fluid Dynamics & Materials Processing, Vol.3, No.2, pp. 129-146, 2007, DOI:10.3970/fdmp.2007.003.129

Abstract This paper presents an overview of diverse extrusion techniques and, in particular, a focused discussion about the rheoextrusion process for semi-solid casting (a novel casting process for the fabrication of high quality metals). The review reveals a wealth of interesting rheological and microstructural features, illustrating qualitative and quantitative data. The analysis is supported by relevant numerical results and examples. It is shown how numerical studies can lead to significant insights into these processes by providing more detailed information on the fundamental mechanisms of morphology development (during phase change) and profile forming. The die filling and solidification behaviours within extrusion dies… More >

V. Gopinath¹, R. S. Bhuvaneswaran²

CMC-Computers, Materials & Continua, Vol.57, No.2, pp. 341-352, 2018, DOI:10.32604/cmc.2018.04006

Abstract Cloud computing is the highly demanded technology nowadays. Due to the service oriented architecture, seamless accessibility and other advantages of this advent technology, many transaction rich applications are making use of it. At the same time, it is vulnerable to hacks and threats. Hence securing this environment is of at most important and many research works are being reported focusing on it. This paper proposes a safe storage mechanism using Elliptic curve cryptography (ECC) for the Transaction Rich Applications (TRA). With ECC based security scheme, the security level of the protected system will be increased and it is more suitable… More >

Jinhua Cui^1,2, Yuanyuan Zhang³, Zhiping Cai^1,*, Anfeng Liu⁴, Yangyang Li⁵

CMC-Computers, Materials & Continua, Vol.55, No.1, pp. 17-35, 2018, DOI:10.3970/cmc.2018.055.017

Abstract While smart devices based on ARM processor bring us a lot of convenience, they also become an attractive target of cyber-attacks. The threat is exaggerated as commodity OSes usually have a large code base and suffer from various software vulnerabilities. Nowadays, adversaries prefer to steal sensitive data by leaking the content of display output by a security-sensitive application. A promising solution is to exploit the hardware visualization extensions provided by modern ARM processors to construct a secure display path between the applications and the display device. In this work, we present a scheme named SecDisplay for trusted display service, it… More >

Jianfeng Lu¹, Xu Liang^1,2, Shuling Hu^1,2

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 145-162, 2015, DOI:10.3970/cmc.2015.045.145

Abstract Flexoelectricity phenomenologically describes the universal electromechanical coupling effect between electric polarization and strain gradient, and electric field gradient and elastic strain. In contrast to piezoelectricity which is invalid in materials with inversion symmetry, flexoelectricity exists, commonly, in all solid dielectrics. In this paper, a summary of the research on flexoelectricity is presented to illustrate the development of this topic. Flexoelectricity still have many open questions and unresolved issues in the developing field, although it has attracted a surge of attention recently. Here we review the theoretical investigations and experimental studies on flexoelectricity, and the aim of the current paper is… More >

Raveendranath U. Nair, Preethi D.S, R. M. Jha

CMC-Computers, Materials & Continua, Vol.40, No.2, pp. 131-144, 2014, DOI:10.3970/cmc.2014.040.131

Abstract Controllable artificial dielectrics are used in the design of radomes to enhance their electromagnetic (EM) performance. The fabrication of such radome wall structures with controllable dielectric parameters seems to be an arduous task. Further even minor fluctuations of dielectric properties of radome wall due to fabrication uncertainties tend to result in drastic degradation of radome performance parameters. In the present work, a novel inhomogeneous radome with graded variation of dielectric parameters is proposed which limits the constraints on fabrication and facilitates excellent EM performance characteristics. This radome wall consists of five dielectric layers cascaded such that the middle layer has… More >

J. Naqui¹, F. Martín¹

CMC-Computers, Materials & Continua, Vol.39, No.3, pp. 267-288, 2014, DOI:10.3970/cmc.2014.039.267

Abstract Metamaterial resonators are electrically small resonant particles useful for the implementation of effective media metamaterials. In this paper, some applications of metamaterial resonators (such as the split ring resonator -SRR-, the complementary split ring resonator -CSRR-, the folded stepped impedance resonator -SIR-, and the electric LC resonator), that exploit the symmetry properties of transmission lines loaded with such symmetric particles, are reviewed. This covers differential (balanced) lines with common mode suppression, linear and angular displacement sensors (including alignment sensors), angular velocity sensors, and radiofrequency barcodes. Advantages and drawbacks as compared to existing implementations are also discussed. More >

Shiv Narayan¹, Latha S.¹ and R M Jha¹

CMC-Computers, Materials & Continua, Vol.39, No.3, pp. 217-230, 2014, DOI:10.3970/cmc.2014.039.217

Abstract The EM analysis of multi-layered metamaterial based radar absorbing structure (RAS) with dual-band characteristics in millimeter wave frequency regime has been carried out in this paper using transmission line transfer matrix (TLTM) method for TE and TM polarizations. The proposed metamaterial-based RAS exhibits dual-band characteristics at centre frequencies 120 GHz and 175 GHz with very low power reflection. It absorbs more than 90% power of incidence wave over the frequency range from 111-131 GHz at first resonance and from 164.5-185 GHz at second resonance without metal backing plate, which is desirable for stealth applications. It also showed very low (<… More >

Balamati Choudhury¹, Sanjana Bisoyi¹, Pavani Vijay Reddy¹, Manjula S.¹ and R. M. Jha¹

CMC-Computers, Materials & Continua, Vol.39, No.3, pp. 179-215, 2014, DOI:10.3970/cmc.2014.039.179

Abstract The terahertz spectrum of electromagnetic waves is finding its position in various applications of day to day life because of its unique properties, including the penetration through opaque materials. Naturally occurring materials in this range are rare due to the display of a natural breakpoint of both electric, and magnetic resonances in these materials. However recent advances in artificially engineered materials, which show resonance in this region are able to harness desirable properties in the terahertz region. In this paper, terahertz design and fabrication issues have been explored along with their applications. A brief review of metamaterial terahertz applications has… More >

Shiv Narayan¹, R M Jha¹

CMC-Computers, Materials & Continua, Vol.37, No.2, pp. 97-108, 2013, DOI:10.3970/cmc.2013.037.097

Abstract A novel metamaterial based FSS (frequency selective surfaces) structure is presented in this paper for wideband airborne radome applications. The proposed metamaterial-FSS structure consists of three layers, where a DPS (double positive sign) layer is sandwiched between a MNG (μ-negative) and ENG (ε- negative) layer, exhibits very good bandpass characteristics inside the operational band along with excellent roll-off characteristics outside the band. The EM performance analysis of the proposed structure has been carried out using transmission line transfer matrix (TLTM) method, which shows excellent bandpass characteristics over a wide frequency range. The transmission efficiency is over 95% both at normal… More >

Shiv Narayan¹, Latha S.¹, R M Jha¹

CMC-Computers, Materials & Continua, Vol.34, No.2, pp. 131-142, 2013, DOI:10.3970/cmc.2013.034.131

Abstract The EM performance analysis of a multilayered metamaterial based radar absorbing structure (RAS) has been presented in this paper based on transmission line transfer matrix (TLTM) method for millimeter wave applications. The proposed metamaterial-RAS consists of cascaded DPS and MNG layers of identical configurations. It exhibits extremely low reflection (< 42 dB) at 95 GHz and absorbs more than 95% power of incident wave over the frequency range of 90.4- 100 GHz without metal backing for both TE and TM polarizations. In view of aerospace applications, the reflection, transmission, and absorption characteristics of the proposed metamaterial-RAS are also studied at… More >