Nadia Gouider¹, Mohammed Benzerara^2,*, Yazid Hadidane¹, S. M. Anas^3,*, Oulfa Harrat¹, Hamda Guedaoura^2,4, Anfel Chaima Hadidane⁵, Messaoud Saidani⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.145, No.1, pp. 457-481, 2025, DOI:10.32604/cmes.2025.071600 - 30 October 2025

Abstract In recent years, cold-formed steel (CFS) built-up sections have gained a lot of attention in construction. This is mainly because of their structural efficiency and the design advantages they offer. They provide better load-bearing strength and show greater resistance to elastic instability. This study looks at both experimental and numerical analysis of built-up CFS columns. The columns were formed by joining two C-sections in different ways: back-to-back, face-to-face, and box arrangements. Each type was tested with different slenderness ratios. For the experiments, the back-to-back and box sections were connected using two rows of rivets. The… More > Graphic Abstract

Oulfa Harrat^1,*, Yazid Hadidane¹, S. M. Anas^2,*, Nadhim Hamah Sor^3,4, Ahmed Farouk Deifalla⁵, Paul O. Awoyera⁶, Nadia Gouider¹

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 3435-3465, 2024, DOI:10.32604/cmes.2023.044950 - 11 March 2024

Abstract Given their numerous functional and architectural benefits, such as improved bearing capacity and increased resistance to elastic instability modes, cold-formed steel (CFS) built-up sections have become increasingly developed and used in recent years, particularly in the construction industry. This paper presents an analytical and numerical study of assembled CFS two single channel-shaped columns with different slenderness and configurations (back-to-back, face-to-face, and box). These columns were joined by double-row rivets for the back-to-back and box configurations, whereas they were welded together for the face-to-face design. The built-up columns were filled with ordinary concrete of good strength.… More > Graphic Abstract