Xiaoding Wei^1,*, Wenqing Zhu¹, Junjie Liu²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09998

Abstract Fiber-reinforced polymer composites with excellent impact energy absorption properties play a pivotal role in the safety of spacecraft, protection of military personnel and equipment, as well as high-speed transportation. Research on the impact performance of composite materials has always relied mainly on expensive experiments and large-scale simulations. In this talk, we will introduce the “dynamic shear-lag model” by extending the classical shear-lag model to the dynamic domain. The dynamic shear-lag model reveals the transfer characteristics of impact energy in the microstructure scale of composite materials, and establishes a quantitative relationship between the " composition-microstructure-performance" of composite materials under impact loading.… More >

Chunhua Liu¹, Dongfang Zou¹, Qinqin Huang¹, Shang Li², Xia Zheng¹, Xingong Li^1,*

Journal of Renewable Materials, Vol.11, No.10, pp. 3613-3624, 2023, DOI:10.32604/jrm.2023.028111

Abstract The residual resources of ramie fiber-based textile products were used as raw materials. Ramie fiber felt (RF) was modified by NaClO₂ aqueous solution and then impregnated with water-based epoxy resin (WER). RF/WER transparent composite materials were prepared by lamination hot pressing process. The composite materials’color difference, transmittance, haze, density, water absorption, and mechanical properties were determined to assess the effects of NaClO₂ treatment and the number of ramie fiber layers on the properties of the prepared composites. The results showed significantly improved optical and mechanical properties of the RF/WER transparent composites after NaClO₂ treatment. With the increase of ramie fiber… More > Graphic Abstract

Stepan Konev¹, Victor A. Eremeyev^2,3, Hamid M. Sedighi^4,5,*, Leonid Igumnov², Anatoly Bragov², Aleksandr Konstantinov², Ayaulym Kuanyshova¹, Ivan Sergeichev¹

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2149-2161, 2023, DOI:10.32604/cmes.2023.028179

Abstract This article presents the results of experimental studies concerning the dynamic deformation and failure of a unidirectional carbon fiber reinforced plastic (T700/LY113) under compression. The test samples were manufactured through the filament winding of flat plates. To establish the strain rate dependencies of the strength and elastic modulus of the material, dynamic tests were carried out using a drop tower, the Split Hopkinson Pressure Bar method, and standard static tests. The samples were loaded both along and perpendicular to the direction of the reinforcing fiber. The applicability of the obtained samples for static and dynamic tests was confirmed through finite… More >

Antonio Pizzi^*

Journal of Renewable Materials, Vol.11, No.9, pp. 3403-3415, 2023, DOI:10.32604/jrm.2023.030930

Abstract This brief article reviews a very particular and quite narrow field, namely what has been done and what is needed to know for tannin adhesives for wood panels to succeed industrially. The present fashionable focus on bioadhesives has led to producing chemical adhesive formulations and approaches for tannin adhesives as a subject of academic publications. These, as good and original they might be, are and will still remain a rather empty academic exercise if not put to the test of real industrial trials and industrial use. They will remain so without the “little” secrets and techniques outlined here that show… More >

Aida Haryati Jamadi¹, Nadlene Razali^1,3,*, Sivakumar Dhar Malingam^1,3, Mastura Mohammad Taha^2,3

Journal of Renewable Materials, Vol.11, No.8, pp. 3261-3276, 2023, DOI:10.32604/jrm.2023.028280

Abstract Natural fibre as a reinforcing agent has been widely used in many industrial applications. Nevertheless, several factors need to be considered, such as the size and weight percentage of the fibre used in binding. Using fused deposition modelling (FDM), this factor was investigated by varying the size of natural fibre as the responding variable with a fixed weight percentage of kenaf fibre. The process of modifying the natural fibre in terms of size might increase the dispersion of kenaf fibre in the polymer matrix and increase the adhesion bonding between the fibre and matrix of composites, subsequently improving the interfacial… More >

Jiahao Wang¹, Jie Zhou², Zhengping Zhao^2,*, Feng Chen¹, Mingqiang Zhong¹

Journal of Renewable Materials, Vol.11, No.8, pp. 3309-3332, 2023, DOI:10.32604/jrm.2023.027278

Abstract Three-dimensional C/SiOx nanofiber anode was prepared by polydimethylsiloxane (PDMS) and polyacrylonitrile (PAN) as precursors via electrospinning and freeze-drying successfully. In contrast to conventional carbon covering Si-based anode materials, the C/SiOx structure is made up of PAN-C, a 3D carbon substance, and SiOx loading steadily on PAN-C. The PAN carbon nanofibers and loaded SiOx from pyrolyzed PDMS give increased conductivity and a stable complex structure. When employed as lithium-ion batteries (LIBs) anode materials, C/SiOx-1% composites were discovered to have an extremely high lithium storage capacity and good cycle performance. At a current density of 100 mA/g, its reversible capacity remained at… More > Graphic Abstract

Mattia Bunel, Ana-Maria Olteanu-Raimond, Cécile Duchêne

Revue Internationale de Géomatique, Vol.29, No.1, pp. 81-106, 2019, DOI:10.3166/rig.2019.00075

Abstract Cet article propose une méthodologie destinée à transformer une description de position exprimée dans un référentiel indirect en une position absolue dans un référentiel direct. Cette problématique nécessite une formalisation des éléments de localisation relatifs, ici sous la forme d’un modèle en triplets, utilisé ensuite comme base de référencement, et un questionnement sur la prise en compte de l’imperfection du langage naturel dans le processus de modélisation. Nous proposons de faire appel aux objets spatiaux flous et nous comparons leurs implémentations afin d’identifier l’approche la plus adaptée au contexte du secours en montagne. More >

Sri Hidayati^1,*, Eugenia Fonny Budiyanto¹, Hadi Saputra¹, Sutopo Hadi¹, Apri Heri Iswanto^2,3, Nissa Nurfajrin Solihat⁴, Petar Antov⁵, Lee Seng Hua^6,7, Widya Fatriasari^4,8, Mohd. Sapuan Salit⁹

Journal of Renewable Materials, Vol.11, No.6, pp. 2865-2879, 2023, DOI:10.32604/jrm.2023.027579

Abstract Black liquor is obtained as a by-product of the pulping process, which is used to convert biomass into pulp by removing lignin, hemicelluloses and other extractives from wood to free cellulose fibers. Lignin represents a major constituent in black liquor, with quantities varying from 20% to 30%, of which a very low share is used for manufacturing value-added products, while the rest is mainly burned for energy purposes, thus underestimating its great potential as a raw material. Therefore, it is essential to establish new isolation and extraction methods to increase lignin valorization in the development of bio-based chemicals. The aim… More > Graphic Abstract

Hamed Younesi-Kordkheili^1,*, Antonio Pizzi^2,*

Journal of Renewable Materials, Vol.11, No.5, pp. 2075-2083, 2023, DOI:10.32604/jrm.2023.026706

Abstract The influence of nanolignin coupling bio-agent on some characteristics of polypropylene-wood flour composites was studied. Thus, nanolignin was prepared by the acidic method, and then different ratios of it (0, 1, 3 and 5 wt%) were added to a polypropylene-wood flour mixture. After mechanically mixing wood flour, nanolignin, and polypropylene, the mixture was injection molded. ASTM methods were used to measure the structural properties of nanolignin, and prepared composites’ water absorption, thickness swelling, bending modulus, and bending, tensile and impact strengths. Transforming the original lignin to nanolignin did not change the chemical bonds of the material. The addition of nanolignin… More >

N. A. Maidin^1,2, S. M. Sapuan^1,*, M. T. Mastura², M. Y. M. Zuhri¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2381-2397, 2023, DOI:10.32604/jrm.2023.026549

Abstract Natural fibre reinforced polymer composite (NFRPC) materials are gaining popularity in the modern world due to their eco-friendliness, lightweight nature, life-cycle superiority, biodegradability, low cost, and noble mechanical properties. Due to the wide variety of materials available that have comparable attributes and satisfy the requirements of the product design specification, material selection has become a crucial component of design for engineers. This paper discusses the study’s findings in choosing the suitable thermoplastic matrices of Natural Fibre Composites for Cyclist Helmet utilising the DMAIC, and GRA approaches. The results are based on integrating two decision methods implemented utilising two distinct decision-making… More >