Chetan Kuthe^∗, R. V. Uddanwadiker^†, P. M. Padole^‡, A. A. Ramteke^§

Molecular & Cellular Biomechanics, Vol.12, No.1, pp. 1-16, 2015, DOI:10.3970/mcb.2015.012.001

Abstract Skeletal muscles are responsible for the relative motion of the bones at the joints and provide the required strength. They exhibit highly nonlinear mechanical behaviour and are described by nonlinear hyperelastic constitutive relations. It is distinct from other biological soft tissue. Its hyperelastic or viscoelastic behaviour is modelled by using CE, SEE, and PEE. Contractile element simulates the behaviour of skeletal muscle when it is subjected to eccentric and concentric contraction. This research aims to estimate the stress induced in skeletal muscle in eccentric and concentric contraction with respect to the predefined strain. With the use of mathematical model for… More >

Dhanjoo N. Ghista^1,2, Liang Zhong², Leok P.Chua², Eddie Y-K Ng², Soo T.Lim³, Ru S. Tan³, TerranceS-J Chua³

Molecular & Cellular Biomechanics, Vol.2, No.4, pp. 217-234, 2005, DOI:10.3970/mcb.2005.002.217

Abstract Background: In this paper, the left ventricle (LV) is modeled as a cylinder with myocardial fibers located helically within its wall. A fiber is modeled into myocardial structural units (MSUs); the core entity of each MSU is the sarcomeric contractile element. The relationship between the sarcomere unit's contractile force and shortening velocity is expressed in terms of the LV model's wall stress and deformation, and hence in terms of the monitored LV pressure and volume. Then, the LV systolic performance is investigated in terms of a mechatronic (excitation-contraction) model of the sarcomere unit located within the LV cylindrical model wall.… More >

V. Ungvichian¹, P. Kanongchaiyos¹

CMES-Computer Modeling in Engineering & Sciences, Vol.77, No.3&4, pp. 201-220, 2011, DOI:10.3970/cmes.2011.077.201

Abstract This paper describes an enhancement to Garland and Heckbert's mesh simplification method by using the principal curvatures and directions of each vertex. We calculate the values and directions, before using them to determine the absolute normal curvature in the direction of contraction, and multiplying the curvature with the edge length, the maximum absolute cosine of the angles between the edge and the normals of faces adjacent to either endpoint, and the quadric error of the collapse. We also apply penalties based on compactness and angular and dihedral deviations of the resulting faces. We have implemented these improvements and tested our… More >

Malcolm R. Davidson¹, Dalton J.E. Harvie¹

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.3, pp. 317-328, 2011, DOI:10.3970/fdmp.2011.007.317

Abstract A volume-of-fluid numerical method, adapted by the authors [Harvie, Cooper-White and Davidson (2008)] to simulate the flow of viscoelastic fluids, is used to predict deformation of a viscoelastic droplet carried by an immiscible Newtonian liquid through an axisymmetric microfluidic contraction-expansion. Values of the capillary number and elasticity number are chosen based on corresponding values for a rectangular contraction for which a reentrant cavity at the rear of the drop and subsequent encapsulation behaviour was observed experimentally by Harvie, Cooper-White and Davidson (2008). A reentrant cavity, similar to the observed one, is predicted; however, encapsulation is not achieved. Unexpectedly, a narrow… More >

D. Cherrared¹, E. G. Filali¹

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.2, pp. 127-151, 2013, DOI:10.3970/fdmp.2013.009.127

Abstract Our study deals with the characterization of the flow and related heat transfer in a smooth, circular minichannel. A duct with a sudden (sharp-edged) contraction is also considered. Prediction of the pressure loss coefficient in this case is obtained via the commercial code CFX 5.7.1. This code is based on the finite volume method for the solution of the Navier-Stokes and offers several turbulences models (in this study we use the shear stress turbulence model - SST). The numerical results are compared with experimental results obtained for a configuration similar to those considered in the numerical study. The numerical algorithm… More >

M.V.V.S. Murthy¹, S. Gopalakrishnan^2,3, P.S. Nair⁴

CMC-Computers, Materials & Continua, Vol.5, No.1, pp. 43-62, 2007, DOI:10.3970/cmc.2007.005.043

Abstract A refined 2-node, 7 DOF/node beam element formulation is presented in this paper. This formulation is based on higher order shear deformation theory with lateral contraction for axial-flexural-shear coupled deformation in asymmetrically stacked laminated composite beams. In addition to axial, transverse and rotational degrees of freedom, the formulation also incorporates the lateral contraction and its higher order counterparts as degrees of freedom. The element shape functions are derived by solving the static part of the governing equations. The element considers general ply stacking and the numerical results shows that the element exhibits super convergent property. The efficiency of the element… More >