Zhengzheng Cao¹, Feng Du^2,3,4, Ping Xu¹, Haixiao Lin¹, Yi Xue³, Yuejin Zhou³

CMC-Computers, Materials & Continua, Vol.53, No.3, pp. 175-186, 2017, DOI:10.3970/cmc.2017.053.187

Abstract The backfilling mining technology is a type of high-efficiency coal mining technology that is used to address the environmental issues caused by the caving mining technology. In this paper, the mechanical model of symmetrical laminated plate representing the overburden movement caused by the backfilling mining technology is established, and the governing differential equation of the motion of the overburden is derived. The boundary conditions of the mechanical model are put forward, and the analytical solution of the overburden movement and surface subsidence is obtained. The numerical model of the overburden movement and surface subsidence, under mining with backfilling, is established… More >

A. M. Abd-Alla^1,2,3, Mohamed I. A. Othman^1,4, S. M. Abo-Dahab^1,5

CMC-Computers, Materials & Continua, Vol.51, No.2, pp. 63-79, 2016, DOI:10.3970/cmc.2016.051.063

Abstract The aim of this paper is to study the reflection of plane harmonic waves from a semi-infinite elastic solid under the effect of magnetic field in a vacuum. The expressions for the reflection coefficients, which are the relations of the amplitudes of the reflected waves to the amplitude of the incident waves, are obtained. Similarly, the reflection coefficient ratio variations with the angle of incident under different conditions are shown graphically. Comparisons are made with the results predicted by the dual-phase-lag model and Lord-Shulman theory in the presence and absence of magnetic field. More >

ZichunYang¹, Gaohui Su^1,2, Bin Chen¹

CMC-Computers, Materials & Continua, Vol.51, No.1, pp. 43-62, 2016, DOI:10.3970/cmc.2016.051.043

Abstract The molecular dynamics (MD) simulations were used to understand the heat transfer process between the gas phase and the solid skeleton in the nanoporous silica aerogels. The amorphous silica nanoparticles were generated by the MD simulations and the energy accommodation coefficient (EAC) between the gases and the nanoparticles was calculated based on the results of the nonequilibrium molecular dynamics (NEMD) simulations. The apparent thermal conductivity (ATC) of the gases between the heat source and heat sink was also obtained. The effects of the temperature, the particle diameter and the molecule type on the EAC and the ATC were investigated. The… More >

Shifeng Xue^1,2, Xiuxing Zhu^1,2, Lin Zhang³, Shenghu Zhu⁴, Guigen Ye^1,5

CMC-Computers, Materials & Continua, Vol.51, No.1, pp. 21-42, 2016, DOI:10.3970/cmc.2016.051.021

Abstract A perforating hole is a channel through which the oil and gas in a reservoir pass into the production well bore. During the process of perforating due to explosion, the surrounding sandstone will be damaged to a certain extent, which will increase the well bore skin and lead to the decrease of production consequently. In this work a mechanical model of perforating damage is developed to describe the influences of perforating due to explosion on the porosity and permeability of the surrounding sandstone near the compaction zone. Based on this developed model, the important data related to the damage of… More >

Sen-Yung Lee¹, Shueei-Muh Lin^2,3, Kai-Ping Chang¹

CMC-Computers, Materials & Continua, Vol.51, No.1, pp. 1-19, 2016, DOI:10.3970/cmc.2016.051.001

Abstract The two coupled governing differential equations for the out-of-plane vibrations of non-uniform beams with variable curvature are derived via the Hamilton's principle. These equations are expressed in terms of flexural and torsional displacements simultaneously. In this study, the analytical method is proposed. Firstly, two physical parameters are introduced to simplify the analysis. One derives the explicit relations between the flexural and the torsional displacements which can also be used to reduce the difficulty in experimental measurements. Based on the relation, the two governing characteristic differential equations with variable coefficients can be uncoupled into a sixth-order ordinary differential equation in terms… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.39, No.2, pp. 153-178, 2014, DOI:10.3970/cmc.2014.039.153

Abstract For the numerical solution of an ill-posed positive linear system we combine the methods from invariant manifold theory and sliding mode control theory, developing an affine nonlinear dynamical system with a positive control force and with the residual vector as being a gain vector. This system is proven asymptotically stable to the zero residual vector by using an argument from the Lyapunov stability theory. We find that the system fast tends to the sliding surface and then moves with a sliding mode, such that the resultant sliding mode control algorithm (SMCA) is robust against large noise and stable to find… More >

Wenqing Wang¹, Thomas Schnicke², Olaf Kolditz³

CMC-Computers, Materials & Continua, Vol.21, No.3, pp. 217-236, 2011, DOI:10.3970/cmc.2011.021.217

Abstract This work focuses on parallel finite element simulation of thermal hydraulic and mechanical (THM) coupled processes in porous media, which is a common phenomenon in geological applications such as nuclear waste repository and CO2 storage facilities. The Galerkin finite element method is applied to solve the derived partial differential equations. To deal with the coupling terms among the equations, the momentum equation is solved individually in a monolithic manner, and moreover their solving processes are incorporated into the solving processes of nonisothermal hydraulic equation and heat transport equation in a staggered manner. The computation task arising from the present method… More >

J. Zidek¹ , J. Kucera¹, J. Jancar¹

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 51-74, 2010, DOI:10.3970/cmc.2010.016.051

Abstract It has been shown that in particulate filled composites, a cross-property relationship exists between various transport properties (e.g., electrical conductivity, mechanical reinforcement, gas permeation) of a macroscale composite. Thus, knowledge of the effective mechanical properties of a composite immediately places bounds on its electrical conductivity or gas permeation behavior. Using these bounds allows us to predict the phase dispersion state that optimizes one or multiple properties of the composite and, thus, the knowledge of how spatial arrangement of filler particles at their given content affects physical properties of the composite can be valuable. In this paper, a new numerical model… More >

Shen Yubin¹, Xie Huicai^1,2, Den Wei¹

CMC-Computers, Materials & Continua, Vol.3, No.2, pp. 49-54, 2006, DOI:10.3970/cmc.2006.003.049

Abstract Bonding an overlay of new concrete onto the damaged concrete is a usual repair method. Because of the different shrinkage rate of the new and old concrete, restrained shrinkage cracks will appear in the new concrete. The cracks will reduce durability and strength of the repaired structure. A new repair method using an interface layer of carbon fiber reinforced cement mortar between new and old concrete was developed in this paper. The new method was found to be very effective in reducing shrinkage cracking of repaired beams and slabs. Comparing with normal repaired beams, the maximum observed width of the… More >