Surajo Muhammad^1,*, Jun Jiat Tiang¹, Sew Kin Wong¹, Amjad Iqbal¹, Amor Smida², Mohamed Karim Azizi³

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 167-184, 2021, DOI:10.32604/cmc.2021.016133

Abstract This paper presents a compact multi-band rectifier with an improved impedance matching bandwidth. It uses a combination of п–matching network (MN) at Port-1, with a parallel connection of three cell branch MN at Port-2. The proposed impedance matching network (IMN) is adopted to reduce circuit complexity, to improve circuit performance, and power conversion efficiency (PCE) of the rectifier at low input power. The fabricated rectifier prototype operates at 0.92, 1.82, 2.1, 2.46 and 2.65 GHz covering GSM/900, GSM/1800, UMTS2100, and Wi-Fi/2.45–LTE2600. The size of the compact rectifier on the PCB board is 0.13λ_g × 0.1λ_g. The fabricated rectifier achieved an… More >

Yifei Wei^{1, *}, Yu Gong¹, Qiao Li¹, Mei Song^{1, *}, Xiaojun Wang²

CMC-Computers, Materials & Continua, Vol.64, No.1, pp. 501-514, 2020, DOI:10.32604/cmc.2020.010048

Abstract In this paper, maximizing energy efficiency (EE) through radio resource allocation for renewable energy powered heterogeneous cellular networks (HetNet) with energy sharing, is investigated. Our goal is to maximize the network EE, conquer the instability of renewable energy sources and guarantee the fairness of users during allocating resources. We define the objective function as a sum weighted EE of all links in the HetNet. We formulate the resource allocation problem in terms of subcarrier assignment, power allocation and energy sharing, as a mixed combinatorial and non-convex optimization problem. We propose an energy efficient resource allocation scheme, including a centralized resource… More >

Xiaoli He^{1, 2}, Hong Jiang^{1, *}, Yu Song^{1, 3}, Muhammad Owais⁴

CMC-Computers, Materials & Continua, Vol.63, No.3, pp. 1273-1296, 2020, DOI:10.32604/cmc.2020.09908

Abstract This paper investigates the power control and routing problem in the communication process of an energy harvesting (EH) multi-hop cognitive radio network (CRN). The secondary user (SU) nodes (i.e., source node and relay nodes) harvest energy from the environment and use the energy exclusively for transmitting data. The SU nodes (i.e., relay nodes) on the path, store and forward the received data to the destination node. We consider a real world scenario where the EH-SU node has only local causal knowledge, i.e., at any time, each EH-SU node only has knowledge of its own EH process, channel state and currently… More >

Bo Mi Lee, In-Ho Kim, Hyung-Jo Jung

The International Conference on Computational & Experimental Engineering and Sciences, Vol.19, No.1, pp. 19-20, 2011, DOI:10.3970/icces.2011.019.019

Abstract Vibration energy harvesting, which converts ambient vibration energy into electrical energy, has been an attractive energy scavenging technique to power wireless sensors or low power devices. Even though vibration energy harvesting has drawbacks which are relatively low harvested power and narrow bandwidth, vibration energy scavenging is one of the promising alternative power techniques in that MEMS techniques can be applied to microminiaturize the system. Therefore, many researches have been done to overcome these problems(Lee et al.2010). This paper presents improvement efficiency on piezoelectric vibration energy harvesting device to surmount issues of vibration energy harvesting. Numerical simulation and experimental test are… More >

Ronald Sabo^1*, Aleksey Yermakov², Chiu Tai Law³, Rani Elhajjar⁴

Journal of Renewable Materials, Vol.4, No.5, pp. 297-312, 2016, DOI:10.7569/JRM.2016.634114

Abstract Cellulose nanomaterials have a number of interesting and unique properties that make them well-suited for use in electronics applications such as energy harvesting devices, actuators and sensors. Cellulose nanofibrils and nanocrystals have good mechanical properties, high transparency, and low coefficient of thermal expansion, among other properties that facilitate both active and inactive roles in electronics and related devices. For example, these nanomaterials have been demonstrated to operate as substrates for flexible electronics and displays, to improve the efficiency of photovoltaics, to work as a component of magnetostrictive composites and to act as a suitable lithium ion battery separator membrane. A… More >

Yu Han^1,*, Wenxian Zheng², Guangjun Wen¹, Chu Chu¹, Jian Su³, Yibo Zhang⁴

CMC-Computers, Materials & Continua, Vol.60, No.2, pp. 795-812, 2019, DOI:10.32604/cmc.2019.05719

Abstract In recent years, Researchers have proposed the concept of Energy Harvesting Backscatter Wireless Networks (EHBWN). EHBWN usually consists of one sink and several backscatter nodes. Backscatter nodes harvest energy from their environment and communicate with sink through backscattering the carrier wave transmitted by sink. Although a certain amount of access protocols for Energy Harvesting Wireless Networks have been present, they usually do not take the sink’s receiver sensitivity into account, which makes those protocols unsuitable in practice. In this paper, we first give an analysis of the backscatter channel link budget and the relationship between the effective communication range and… More >