ASIS K. MANDAL¹, DEBABRATA CHAKRABORTY², MAHUYA DAS³, SAMIR K SIDDHANTA^4,*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 21-34, 2021, DOI:10.32381/JPM.2021.38.1-2.3

Abstract Elastomeric chlorosulfonated polyethylene (Hypalon) and thermoplastic polypropylene (PP) based thermoplastic Vulcanizates (TPVs) were prepared in presence of different doses of partial methyl ester of styrene-maleic anhydride copolymer (PMES-MA) as compatibilizer employing dynamic vulcanization technique. The mechanical analysis of the prepared TPVs exhibited significant improvements in stress at 25% modulus, ultimate tensile strength (UTS), and hardness values. FTIR studies revealed that a chemical interaction had taken place between hypalon and compatibilizer during the process of dynamic vulcanization which led to an enhancement of interfacial adhesion between them. The two-phase morphologies were clearly observed by scanning electron microscopic studies. The Tg values… More >

Jiamao Li^1,2,*, Chuimin Zhang¹, Lin Li¹, Chuangang Fan^1,*, Zhaofang He³, Yuandi Qian³

Journal of Renewable Materials, Vol.10, No.12, pp. 3439-3458, 2022, DOI:10.32604/jrm.2022.021214

Abstract The purpose of this paper was to explore the possibility of using low-alkalinity cementitious materials as binders, in which ground blast furnace slag and fly ash acted as a partial replacement of ordinary Portland cement, and CaSO₄, Na₂SO₄, and CaO were used as a sulfate activator and alkali-activated additives, to solidify gold mine tailings for preparation of a green, inexpensive cemented paste backfill (CPB). For this target, the effects of cement/ tailings ratio, superplasticizer dosage, solid content, tailings fineness on the mechanical properties of the CPB were investigated. Additionally, the hydration mechanism of the CPB was analyzed based on X-ray… More >

Natthanan Wonganan, Chainarong Athisakul^*, Peerasit Mahasuwanchai, Weerachart Tangchirapat, Raktipong Sahamitmongkol, Sutat Leelataviwat

Journal of Renewable Materials, Vol.9, No.2, pp. 179-204, 2021, DOI:10.32604/jrm.2021.013134

Abstract The historical structures of Thailand are some of the most fascinating ancient sites in Asia. Their architectures reveal past cultures, traditions, knowledge, and expertise. Masonry materials are the major materials used to construct the historical structures in Thailand. One of the essential problem of Thai historical structure preservation is a shortage of engineering properties data for the structural stability assessment. Moreover, the in-depth engineering properties and the suitable substitution materials for Thai historical preservation are rarely found. Therefore, the engineering properties of the ancient masonry materials have to be explored together with the development of suitable substitute materials. This paper… More >